mikrotik RB750UPr2 hEX PoE Lite is a Router User Guide
19/11/2024, 13:35
hEX PoE lite - User manuals - MikroTik Documentation
hEX PoE lite (RB750UPr2)
The hEX PoE lite is a router with five Ethernet ports. It has one USB 2.0 port and supports PoE power output to ports 2-5
(500 mA maximum per port).
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with
standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original
packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this
product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug
from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels,
output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be
professionally installed.
First use
Connect your WAN cable to port 1, and LAN computers to ports 2-5.
Set LAN computer IP configuration to automatic (DHCP).
The default IP address from LAN is 192.168.88.1.
User name admin and no password, (or, for some models, check user and wireless passwords on the sticker)
Powering
The board accepts power from the power jack or from the first Ethernet port (Passive PoE):
direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 8-28 V DC,
The first Ethernet port accepts passive Power over Ethernet accepts 8-28 V DC.
Normally the power consumption of this device is 2.4 W, under maximum load 3.6 W.
Power output
This device can supply PoE powering to external devices from its Ethernet ports. This is convenient as you don't need any
additional PoE injectors to power other devices. This feature is indicated by the letter "P" in the device model name. The
1/4
| General | Details |
|---|---|
| Name | mikrotik RB750UPr2 hEX PoE Lite is a Router User Guide |
| Make | Mikrotik |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.23 MB |
If you have any questions regarding mikrotik RB750UPr2 hEX PoE Lite is a Router User Guide, please ask here and describe the problem in detail.

mikrotik RB960PGS Hex PoE 5-Port Router User Manual

MikroTik Cloud Hosted Router User Guide

MikroTik RB750r2 hEX Lite Router User Guide

MikroTik C52iG-5HaxD2HaxD-TC Wireless Router User Guide

MikroTik RBcAPGi-5acD2nD-XL Wireless Router User Guide

MikroTik hAP ax³ Wireless Network Router User Manual

MikroTik wAP ac Wireless Router User Manual

MikroTik Chateau LTE18 ax Dual Band Wireless Router User Manual

MikroTik RBMetalG-52SHPacn Metal Wireless Router User Manual

MIKROTIK 2004-1G-12S+2XS Cloud Core Router User Manual

















