Home > teltonika > TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide

TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide

LOGIN TO DEVICE  
1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.  
2. Use login information shown in image A when prompted for authentication.  
3. After you log in, you will be prompted to change your password for security reasons. The new password must  
contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step  
is mandatory, and you will not be able to interact with the router's WebUI before you change the password.  
4. When you change the router's password, the Configuration Wizard will start. The Configuration Wizard is a tool  
used to set up some of the router's main operating parameters.  
5. Go to the Overview page and pay attention to the Signal Strength indication (image B). To maximize the  
cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal  
conditions.  
A.  
B.  
-50 dBm  
Data connection state  
State  
Connected  
admin  
Registered (home); OPERATOR; 4G (LTE)  
admin01  
SIM card slot in use  
Bytes received/sent*  
Ready  
348.7 KB / 223.5 KB  
TECHNICAL INFORMATION  
Radio specifications  
RF technologies  
3G, 4G, GNSS, WiFi, BLE  
Max RF power  
24 dBm@WCDMA, 23 dBm@LTE, 23 dBm@WiFi 10 dBm@BLE  
Bundled accessories specifications*  
Power adapter  
Mobile antenna  
GNSS antenna  
WiFi antenna  
Input: 0.6 A@100-240 VAC, Output: 12 VDC, 1.5 A, 4 pin plug  
698~960 / 1710~2690 MHz, 50 Ω, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector  
1575.42~1602 MHz, 2.2~5 VDC, VSWR<1.5, active total gain** 28 dB (typ.), RHCP polarization, SMA male connector  
400~2483.5 MHz/5150~5905 MHz, 50 Ω, VSWR<2.0, gain** 3.0 dBi, omnidirectional, RP-SMA male connector  
2400~2500 MHz, 50 Ω, VSWR<2.5, gain** 2.5 dBi, omnidirectional, RP-SMA male connector  
BLE antenna  
*Order code dependent.  
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.  
GeneralDetails
NameTELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide
Maketeltonika
LanguageEnglish
FiletypePDF (Download)
File size0.23 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

11 + four =

TELTONIKA 4G LTE Wi-Fi Dual-SIM Router RUT950 User Guide
TELTONIKA 4G LTE Wi-Fi Dual-SIM Router RUT950 User Guide
TELTONIKA RUTX09 Cellular IoT Router User Guide
TELTONIKA RUTX09 Cellular IoT Router User Guide
TELTONIKA RUT850 E-mark approved LTE Router User Guide
TELTONIKA RUT850 E-mark approved LTE Router User Guide
TELTONIKA RUT955 LTE Router User Guide
TELTONIKA RUT955 LTE Router User Guide
TELTONIKA RUT950 CAT4 LTE Router User Guide
TELTONIKA RUT950 CAT4 LTE Router User Guide
Teltonika RUT955 Dual SIM 4G LTE and WiFi Cellular Router User Guide
Teltonika RUT955 Dual SIM 4G LTE and WiFi Cellular Router User Guide
TELTONIKA OTD140 4G Outdoor Router User Guide
TELTONIKA OTD140 4G Outdoor Router User Guide
TELTONIKA RUT260 LTE Router User Manual
TELTONIKA RUT260 LTE Router User Manual
TELTONIKA RUT301 Router User Guide
TELTONIKA RUT301 Router User Guide
Teltonika RUT241 LTE Router Owner’s Manual
Teltonika RUT241 LTE Router Owner’s Manual

TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide