TP-Link Archer AXE300 Quad-Band Wi-Fi 6E Router Installation Guide

1

2

LED Explanation  

Need Help?  

• Pulsing Yellow  

Q1. What should I do if I want to change the WAN port for  

internet service?  

The system is starting up or the router is being reset.  

• Connect to your desired WAN port with an Ethernet cable.  

During the Quick Setup, select the corresponding port as the  

internet port. Alternatively, go to Internet > Internet Port (web  

management page) or Tools > Internet Connection > Internet  

Port (Tether app) to change the internet port.  

Q2. What should I do if I can’t access the web management  

page?  

Quick Installation Guide  

• Solid Blue  

The router is working normally.  

• Solid Red  

No internet connection.  

• Pulsing Red  

No internet connection and the Wi-Fi is off.  

•

•

Reboot your router and try again.  

• Solid Yellow  

The Wi-Fi is off.  

If the computer is set to a static IP, change its settings to  

obtain an IP address automatically.  

•

Verify that http://tplinkwifi.net is correctly entered in the web  

browser. Alternatively, enter http://192.168.0.1 or  

http://192.168.1.1 in the web browser.  

Use another web browser and try again.  

Disable and enable the network adapter in use.  

• Pulsing Blue  

The firmware is being upgraded or WPS connection is being  

established. Do not disconnect or power off your router.  

•

•

Q3. What should I do if I can’t access the internet?  

Button Explanation  

•

•

•

Power off your modem for about 5 minutes, then power it on  

and check the internet. If your modem has more than one  

Ethernet port, keep other ports unconnected.  

• LED Button  

Press the button for 1 second to turn on or off the LEDs of  

your router.  

Check if the internet is working normally by connecting a  

computer directly to the modem via an Ethernet cable. If it is  

not, contact your internet service provider.  

• Wi-Fi Button  

Press and hold the button for more than 2 seconds, then  

release the button to turn on or off the wireless function of  

your router.  

L

og in to the web management page, and go to the Network  

Map page to check whether the internet IP address is valid or  

not. If it’s valid, go to Advanced > Network > Internet, click  

Advanced Settings, select Use the Following DNS Addresses,  

set the primary DNS to 8.8.8.8, and set the secondary DNS to  

8.8.4.4. If it is not, check the hardware connection or contact  

your internet service provider.  

• WPS Button  

Press the button for 1 second, and immediately press the  

WPS button on your client to start the WPS process.  

• RESET Button  

Press and hold the button for about 6 seconds until the LEDs  

blink to reset the router to its factory default settings.  

•

For cable modem users, log in to the web management page  

of the router and go to Advanced > Network > Internet > MAC  

Clone. Select Clone Current Device MAC and click SAVE.  

Then reboot both the modem and the router.  

To communicate with TP-Link users or engineers, visit  

https://community.tp-link.com to join TP-Link Community.  

Q4. What should I do if I forget my wireless password?  

• If you have not changed the default wireless password, it can be  

found on the label at the bottom of the router.  

For technical support, replacement services, user guides, and  

other information, please visit https://www.tp-link.com/support.  

If you have any suggestions or needs for our product guides, you  

are welcome to email techwriter@tp-link.com.cn.  

• Connect a computer directly to the router using an Ethernet  

cable. Log in to the router’s web management page at  

http://tplinkwifi.net, and go to the Wireless page to retrieve or  

· Keep the device away from water, fire, humidity or hot environments.  

· Do not attempt to disassemble, repair, or modify the device. If you need service,  

please contact us.  

Quad-Band Wi-Fi 6E Router  

reset your wireless password  

.

Q5. How should I position my router for optimal Wi-Fi  

performance?  

· Do not use any other chargers than those recommended.  

· Do not use damaged charger or USB cable to charge the device.  

· Do not use the device where wireless devices are not allowed.  

· Adapter shall be installed near the equipment and shall be easily accessible.  

• Don’t place your router in a corner or in a closet.  

• Avoid obstacles and high-powered appliances.  

• Keep your router in a central location at a certain height.  

This device is restricted to indoor use only.  

The operation of this device is prohibited on oil platforms, cars, trans, boats, and  

aircraft, except that operation of this device is permitted in large aircraft while flying  

above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is  

prohibited for control of or communications with unmanned aircraft systems.  

• Keep the antennas vertical.  

©2022 TP-Link 7106509593 REV1.0.0  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer AXE300 Quad-Band Wi-Fi 6E Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.57 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer AXE300 Quad-Band Wi-Fi 6E Router Installation Guide, please ask here and describe the problem in detail.