trend Router Cutter Safety Instructions
the eccentricity of the router cutter and clamping
system checked by competent personnel.
Routing Safety
n Disconnect machine from power source before
carrying out any adjustments.
n Current Personal Protection Equipment (PPE) for
eye, ear and respiration protection must be worn.
Keep hands, hair and clothing clear of the cutter.
Maximum Speed (n.max)
n The maximum speed marked on the tool, or shown
in the chart or on the packaging, shall not be
exceeded. Where stated, the speed range should
be adhered to.
n Before each use check that the cutting tool is
sharp and free from damage. Do not use the
cutting tool if it is dull, broken or cracked or if
any other damage is noticeable or
Router Cutter Repair/Maintenance
n Repair of tools is only allowed in accordance with
the manufacturers instructions.
n The design of composite (tipped) tools shall not
be changed in the process of repair. Composite
tools shall be repaired by a competent person,
i.e. a person of training and experience, who
has knowledge of the design requirements and
understands the levels of safety to be achieved.
n Repair shall therefore include, e.g. the use of spare
parts which are in accordance with the specification
of the original parts provided by the manufacturer.
n Tolerances which ensure correct clamping shall be
maintained.
suspected.
n Clamping surfaces shall be cleaned to
remove dirt, grease, oil and water.
A
n Tool’s shank must be inserted into the
router’s collet until the K mark is at least
covered partially or fully by the collet.
n Tools and tool bodies shall be clamped
in such a way that they shall not
become loose during operation.
n Care shall be taken when mounting cutting tools
to ensure that the clamping is by the shank of
the cutting tool and that the cutting edges are not
in contact with each other or with the clamping
elements.
n Care shall be taken that regrinding of the
cutting edge will not cause weakening
of the body and the connection of the
cutting edge to the body.
n Fastening screws and nuts shall be tightened
using the appropriate spanners etc., and to the
torque value provided by the manufacturer.
n Extension of the spanner or tightening using
hammer blows shall not be permitted.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as
waste.
Packaging should be sorted for environmental-
friendly recycling.
n Clamping screws shall be tightened according to
instructions provided by the manufacturer. Where
instructions are not provided, clamping screws
shall be tightened in sequence from the centre
outwards.
n ALWAYS WEAR EYE PROTECTION.
n In case of excessive vibrations while using the
router stop immediately the operation and have
The product and its accessories at the end of its life
should be sorted for environmental-friendly recycling.
GUARANTEE
All Trend products guaranteed against any defects
in either workmanship or material, except products
that have been damaged due to improper use or
maintenance.
Please see Trend website:
| General | Details |
|---|---|
| Name | trend Router Cutter Safety Instructions |
| Make | trend |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.07 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding trend Router Cutter Safety Instructions, please ask here and describe the problem in detail.
trend T1ETS Electric Trim Router Instruction Manual
trend T18S-DS 18V Cordless 1-4 Inch Router Instructions
trend T8EK Electric Router Instruction Manual
Cudy LT500D 4G AC1200 Wi-Fi Router Installation Guide
Cudy AC1200 Dual Band Unlocked 4G LTE Modem Router Installation Guide
MIKroTik D53G-5HacD2HnD Chateau 5G LTE Dual Band AC 5 Port Gigabit Router User Guide
GL TECHNOLOGIES GL-A1300 AC1300 Gigabit Wireless Router User Manual
NETGEAR MH3150 M3 Mobile Hotspot Router Owner’s Manual
Tenda 4G03 N300 Wifi 4G LTE Router Installation Guide
cradlepoint CTR35 Wireless Router User Guide
GearUp HYPEREV WH01 Wireless Router User Guide
D-Link DWR-M921 4G LTE Router Installation Guide
TP-Link ER7212PC Omada 3-in-1 Gigabit VPN Router Owner’s Manual