TUBBUTEC TRS Bridge 4×4 TRS Midi Router User Guide
Simple routing
There are two ways to connect inputs and outputs.
• Input side of view: Connect an input to one or multiple outputs
• Output side of view: Connect an output to one or multiple inputs
Both methods can result in the same routing and both methods are supported by TRS-
Bridge
The Simple routing method can be used to quickly connect inputs and outputs without
having to think about the various kinds of MIDI messages.
Connect an input to outputs
From the status page press one of the input buttons.
The input will blink in white.
The output LEDs show the connections between this input and the outputs.
Press the output buttons to turn connections between the selected input and this output on
or off.
You can also select a different input by pressing another input button.
To exit the simple routing page and go back to the status page, press the selected
(blinking) input again.
Connect an output to inputs
From the status page press one of the output buttons.
The selected output will blink in white.
The input LEDs show the connections between this output and the inputs.
Press the input buttons to turn connections between the selected input and this output on
or off. Note: Since only only one clock can be received by an output, TRS-bridge will
automatically remove previous clock routings when a new connection is made. You will
see previously white connections (All message types routed) turn orange (Only Note and
Sysex messages routed).
You can also select a different output by pressing another output button.
To exit the simple routing page and go back to the status page, press the active (blinking)
output again.
6
Simple routing,
Simple routing,
input side of view.
output side of view.
Input 1 is selected and
blinking
Output 3 is selected and
blinking
inputs 1, 3 and 4 are
connected to output 3
However, only the clock
from intput 1 is routed to
output 3.
From inputs 3 and 4
clock is not received
Outputs 1 and 2 are
connected to input 1
Advanced routing
With advanced routing you can route the various message types (Notes/CC, Clock and
Sysex) independently.
Routing notes / CC
From the status page press inputs 1 & 2 simultaneously. Inputs 1 & 2 will blink in red
indicating that you can now select channels for Note routing.
You can select either an input channel or an output channel and continue routing the same
way as in Simple Routing.
Routing clock
From the status page press inputs 2 & 3 simultaneously. Inputs 2 & 3 will blink in blue
indicating that you can now select channels for Clock routing.
You can select either an input channel or an output channel and continue routing the same
way as in Simple Routing. You will notice that only one input can be selected for each
output.
7
| General | Details |
|---|---|
| Name | TUBBUTEC TRS Bridge 4×4 TRS Midi Router User Guide |
| Make | Tubbutec |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.12 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding TUBBUTEC TRS Bridge 4×4 TRS Midi Router User Guide, please ask here and describe the problem in detail.
Cudy WR3000H 2.5G Mesh WiFi 6 Router Installation Guide
ARISTA AWE-5510 Wifi Router User Guide
Cudy AC1200 WiFi Mesh Router User Guide
TELTONIKA RUTC50 5G Router User Guide
dahua N300 Wireless Router User Guide
HUAWEI WS7100 V2 WiFi 6 Plus WiFi Router User Guide
ERICSSON S400-C6-NA Wireless Router User Guide
ioGiant AX1800 Wi-Fi Router Wireless Router Installation Guide
AVCOMM AP224 WLAN Compact LTE WLAN Router Installation Guide
NETGEAR Nighthawk BE6500 BE5000 Dual Band Wi-Fi Router User Guide