UfiSpace S9600-32X 100G Aggregation Router Installation Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

1. Ensure there is enough power to supply the system.  

The maximum system power consumption is 621.3 watts. It is recommended to ensure that  

enough power is reserved from the power distribution system before installation. Also, please  

ensure that both PSUs have been properly installed before powering up the equipment, as the  

S9600‐32X is designed to support 1 + 1 power redundancy.  

z

Testing criteria for maximum power are as follows:  

Temperature:45⁰C  

Optics: full populated  

Traffic: 100% load  

Note  

2. Attach the power cable.  

Locate the AC inlet connector on the PSU and plug the AC power cable (250VAC 15A, IEC60320  

C19) into the AC inlet connector.  

3. Feed AC power into the system.  

The PSU will immediately output 12V & 5VSB to the system with a 100‐240V, AC power source.  

The PSU has a built‐in 15 amperes, fast acting fuse based on the PSU maximum capacity, which  

will act as a second tier system protection in case the power distribution unit’s fuse is not  

functioning.  

4. Verify that the power supply is operating.  

If connected correctly, when turned on, the LED on the PSU will light up with a solid Green  

color designating normal operation.  

S9600‐32X Hardware Installation Guide | 21  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	UfiSpace S9600-32X 100G Aggregation Router Installation Guide
Make	UfiSpace
Language	English
Filetype	PDF (Download)
File size	0.84 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• UfiSpace

Questions and Answers (0)

If you have any questions regarding UfiSpace S9600-32X 100G Aggregation Router Installation Guide, please ask here and describe the problem in detail.