Home > VIRTUAL ACCESS > VIRTUAL ACCESS GW1000M Series Router User Manual

VIRTUAL ACCESS GW1000M Series Router User Manual

2: GW1000M Series router hardware  
_______________________________________________________________________________________________________  
2.4 WiFi technology  
802.11 b/g/n  
Single band 2.4GHz  
Up to 20dBm output power  
Internal antenna  
2.5 Power supply  
The GW1000M Series router has four power supply options:  
External standard 12V DC 0.5 A  
External standard 12V DC 0.5 A with extended temp (-20˚C to -70˚C)  
Internal isolated 18-36V DC input  
Power lead with 3 connectors for 12V permanent, 12V switched (ignition sense)  
and ground  
2.6 Compliance  
The GW1000M Series router is compliant and tested to the following standards:  
Safety  
EN60950-1: 2006  
EMC  
EN55022:1998 Class B and EN55024:1998 ETSI 301489-17  
ETSI 300 019-1-3 Sinusoidal Vibration and Shock ETSI 300 019-2-3 Random Vibration.  
ETSI EN 300 328 V1.9 (2015-02)  
Environmental  
WiFi 2.4GHz  
2.7 Operating temperature range  
The operating temperature range depends on the RF band of the module. Refer to the  
Radio Bands datasheet.  
2.8 Antenna  
The GW1000M Series router standard locking DC power connector model has two  
additional SMA female WiFi antenna sockets.  
2.8.1  
Antennas on the GW1000M Series router  
2 x LTE SMA female antenna connectors  
MIMO support in LTE versions  
1 x GPS SMA female antenna connector with 3v3 active power feed  
2 x SMA female WiFi antenna sockets*  
*No WiFi on GW1000M isolated DC power connector models.  
_______________________________________________________________________________________________________  
© Virtual Access 2023  
GW1000M Series User Manual  
Issue: 2.7  
Page 18 of 23  
2: GW1000M Series router hardware  
_______________________________________________________________________________________________________  
2.9 GW1000M Series components  
To enable and configure connections on your router, it must be correctly installed.  
The routers contain an internal web server that you use for configurations. Before you  
can access the internal web server and start the configuration, ensure the components  
are correctly connected and that your PC has the correct networking setup.  
2.9.1  
Standard components  
1 x GW1000M Series router  
1 x plastic carrier  
1 x lockable SIM cover  
Table 2: GW1000M Series router standard components  
2.9.2  
Optional components  
Ethernet cable. RJ45  
connector at both ends.  
Power supply unit.  
Right angle antenna for  
3G or 4G network.  
Virtual Access supplies a wide range of antennas for  
3G or 4G networks. Please visit our website:  
www.virtualaccess.com or contact Virtual Access for  
more information.  
Right angle or straight  
stubby antenna for WiFi  
connection  
Virtual Access supplies a wide range of antennas for WiFi. Please  
visit our website: www.virtualaccess.com or contact Virtual Access  
for more information.  
1 x fused automotive  
cable  
1 x non-fused automotive  
cable  
Table 3: GW1000M Series router optional components  
_______________________________________________________________________________________________________  
© Virtual Access 2023  
GW1000M Series User Manual  
Issue: 2.7  
Page 19 of 23  
GeneralDetails
NameVIRTUAL ACCESS GW1000M Series Router User Manual
MakeVIRTUAL ACCESS
LanguageEnglish
FiletypePDF (Download)
File size0.58 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding VIRTUAL ACCESS GW1000M Series Router User Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

four × 2 =

VIRTUAL ACCESS GW1000M Series Router User Manual