WAVLINK AC1200 Dual Band Wi-Fi Extender/AP User Guide
OVERVIEW
LED INDICATORS
OPTION I
1. Plug the extender in a power outlet.
3. Launch a browser from your laptop/PC or smart phone and
enter wifi.wavlink.com or 192.168.10.1 in the address field.
The default password is admin.
5. Mode selection
5.1 Select “Repeater mode”, then you can select an upstream
router either manually or automatically.
5.2 Select “AP mode”, you can either keep the old SSID
or create new ones; then set up a password according
to the rules.
Pink
stable
The device is being activated.
The internet is not connected.
fast flash
slow flash
2. Connection.
The internet is connected but
not accessible.
2.1 Via Wireless
Red
Turn on your Wi-Fi and search SSID of this product on your
wireless devices (smart phone, tablet computer, laptop, etc.)
then connect to it.
stable
stable
The connection is bad.
The connection is good.
LED
status
Wi-Fi Range Extender
WPS is trying to establish
connection to your router.
fast flash
slow flash
Blue
WPS is trying to establish
connection to the client.
Router
Cable
English
Login
Wi-Fi:On
Turn Wi-Fi Off
QUICK START GUIDE
Router
Not connected
WAVLINK_N_xxxx
Connections are available
Repeater Wizard
WAVLINK_AC_xxxx
AC1200 Dual Band Wi-Fi Extender/AP
AP mode
Wireless Network Connection
Join Other Network....
WAVLINK_N_xxxx
Repeater Mode:
Connect to:
Gateway(recommended)
2.4G:
Create Network....
WAVLINK_AC_xxxx
4. Select a language and set a new login password following
the rules accordingly.
5G:
Connect automatically
Connect
Open Network Preferences...
Default Parameters
Wi-Fi Password:
Security type:
Password:
WPS Button
WAN/LAN
For Windows users
For Mac users
System Setup
2.4G:
5G:
LED light
Reset Button
Language:
English
Default password: admin
2.2 Via Cable
Login Password:
2.4G SSID: WAVLINK_N_xxxx
5G SSID: WAVLINK_AC_xxxx
Default IP: 192.168.10.1
Save
Connect Ethernet cable to your PC/laptop and device
LAN port, then you can start configuring the device.
Connect
Save
Select a Wi-Fi
Manually
Note:
WPS Button:
Login: http://wifi.wavlink.com
Official website: www.wavlink.com
The Password length must be at least 10 characters, at most 63 characters and must meet
at least 3 out of the following 4 complexity rules
Wireless-AC
WAVLINK (@WavlinkOcial)
WAVLINK SUPPORT (@WavlinkTechSupport)
Hold the WPS button on your router for few seconds,
then press and hold WPS on this device for 8 seconds,
the pairing process is established in 2 mins.
Note:
Wireless-N
1. at least 1 uppercase character (A-Z)
2. at least 1 lowercase character (a-z)
3. at least 1 digit (0-9)
The Password length must be at least 10 characters, at most 63 characters and must meet
at least 3 out of the following 4 complexity rules
Technical support: support@wavlink.com
WAVLINK-Mesh
WAVLINK-Touch
4. at least 1 special character (! # $ % &
(, space)
'
( ) *
+
-
.
/
:
< =
>
?
@ [
]
^
_ `
|
} ~ / ") except
1. at least 1 uppercase character (A-Z)
2. at least 1 lowercase character (a-z)
3. at least 1 digit (0-9)
;
Reset Button:
4. at least 1 special character (! # $ % &
(, space)
'
( ) *
+
-
.
/
:
< =
>
?
@ [
]
^
_ `
|
} ~ / ") except
;
Press and hold for 6 seconds to Reset the Extender.
WL-WN579A3
01
02
03
04
05
06
Wi-Fi Password Management
FAQ
Firmware Upgrade
GNU GENERAL PUBLIC LICENSE NOTICE
OPTION II
1. Press and hold the WPS or Pair button of your router (the
duration varies due to different routers, please refer to your
router manufacturer or ISP if you have trouble figuring out
the pairing process).
For your network security, we suggest that you create a new
Wi-Fi password if you use the extender mode. As for the setup
of password, please refer to “Notes”.
If you need to update firmware, please proceed as the
following steps:
This product includes software codes developed by third parties.
These software codes are subject to either the GNU General Public
License (GPL), Version 2, June 1991 or the GNU Lesser General
Public License (LGPL), Version 2.1, February 1999. You can copy,
distribute, and/or modify in accordance with the terms and conditions
of GPL or LGPL.
Q1. Why doesn’t the login page appear after entering
- Make sure your PC is set to obtain IP address automatically.
- Make sure your PC is connected to the extender properly.
- Reboot your device and try again.
1. Download the latest firmware file on Wavlink website.
2. Extract the firmware from the downloaded file.
3. Log in to wifi.wavlink.com or 192.168.10.1, then choose
“Setup” and select “Upgrade Firmware”.
Q2. How do I restore the device to factory default
setting?
Wi-Fi Configuration
Smart Connect
The source code should be complete, if you want us to provide any
additional source code files under GNU General Public License (GPL),
please contact us in these matters. We are committed to meeting the
requirements of the GNU General Public License (GPL). You are
welcome to contact us local office to get the corresponding software
and licenses. Please inform us your contact details (full address) and
the product code. We will send you a software package with the
software and license for free.
Upgrade Firmware
- Press and hold the reset button of the extender for 6 seconds.
Version:M78N_V3130.1121
2.4G:
Wireless-N
Q3. How do I choose the three modes?
Browse
5G:
Wireless-AC
- Please choose the mode that suits you, AP mode turns your
wired network into wireless connection; extender mode enhances
your network; router mode works as your main router.
Do NOT power off the device during the firmware upgrade. Wait for a few
minutes for the firmware upgrade to complete and the device to reboot.
Thank you for purchas-
ing WAVLINK product!
Security Type:
Wi-Fi Password:
WPA/WPA2 Mix(Recommended)
Apply
Press the WPS button
Press 6 seconds
Q4. I have enabled a wireless MAC filter, wireless
aceess control or access control list (ACL) on my
router. What should I do before configuring and
using the extender?
- If you have enabled those functions of your host router, you may
need to disable them first, then follow “Option I” or “Option II”
to complete the configuration.
Apply
Status
Wizard
Wi-Fi
Setup
The respective programs are distributed WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
2. Press and hold the WPS button of the device for 6 seconds
till the status LED turns solid blue, signifying that the pairing
process is completed.
Help:
4. Click on Browse/Choose File to locate the firmware file.
The Password length must be at least 10 characters, at most 63 characters and must meet
at least 3 out of the following 4 complexity rules
5. Click on Apply, and wait for the firmware upgrade process
Please refer to the GNU General Public License website for further
Note:
to complete.
In AP mode, the wireless signal comes from the device.
The Password length must be at least 10 characters, at most 63 characters and must meet
at least 3 out of the following 4 complexity rules
information.
AP Mode
What is firmware upgrade and why do I need it?
1. at least 1 uppercase character (A-Z)
2. at least 1 lowercase character (a-z)
3. at least 1 digit (0-9)
Q6. What should I do if I can’t have access to
Firmware fixes bugs for your device, contains new features,
and improves the experience of using the product. For your
device update and security, please ask us for help, wrong
upgrade may damage your device and void the product
warranty.
4. at least 1 special character (! # $ % &
(, space)
'
( ) *
+
-
.
/
: <
=
>
?
@ [ ]
^
_ `
|
} ~
/
") except
192.168.10.1 or wifi.wavlink.com on my android phone?
- We suggest you turn off your 4G signal first before you set up
the network, then turn it on when the configuration is done.
;
Ethernet Cable
Router
WAVLINK (@WavlinkOcial)
WAVLINK SUPPORT (@WavlinkTechSupport)
In Repeater mode, the wireless signal comes from the router.
Status
Wizard
Wi-Fi
Setup
Repeater Mode
details.
For more details, please visit our website www.wavlink.com
Our Technical Support: support@wavlink.com
Router
08
09
10
11
07
| General | Details |
|---|---|
| Name | WAVLINK AC1200 Dual Band Wi-Fi Extender/AP User Guide |
| Make | WavLink |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding WAVLINK AC1200 Dual Band Wi-Fi Extender/AP User Guide, please ask here and describe the problem in detail.
WAVLINK WL-WN586X3-A AX3000 Wireless Dual Band Gigabit Mesh Router Instructions
WAVLINK AC1200 Wireless WiFi Router User Guide
WAVLINK AC1200 WiFi AP/Router Specifications
WAVLINK AC1200 WiFi Router Instructions
WAVLINK 575A3 Dual Band WiFi Extender Repeater Access Point Router Instruction Manual
HBC BX54 Gigabit Dual Band Wireless Router User Manual
D-Link G415 AX1500 4G Router User Guide
MERCUSYS MR47BE BE9300 Tri Band WiFi 7 Router User Guide
ASUS EBG19P Gigabit PoE Plus VPN Wired Router User Guide
TechPowerUp Openwrt ONE Wi-Fi 6 Router User Manual
Pix-Link AX02 Wi-Fi 6 Router Installation Guide
TELTONIKA QSG RUT142 RS232 Router User Manual
UTR-232 WiFi 6 Starlink Router Instruction Manual
TP-Link M7350 4G LTE Mobile Wi-Fi Router Installation Guide
IMOU AX3000 Wi-Fi 6 Router User Guide