WAVLINK AC1200 WiFi Router Instructions
If there is no AP mode option with your WAVLINK router, here
are the instructions for you.
It requires change the LAN IP of your WAVLINK router to an IP address on the same network
segment of the main router. This IP address should be outside the main router’s DHCP range.
For example, if the LAN IP of your main router is 192.168.19.1, the DHCP range is
192.168.19.100-192.168. 200 .
Then you can set the LAN IP address of your WAVLINK router to 192.168.19.2, the same segment
but not in the range of 192.168.19.100-192.168.19.200.
1. Log into the web management page of your main router to confirm the LAN IP and DHCP
range of the main router. Assume that the LAN IP address of the main router is 192.168.19.1, and
DHCP range 192.168.19.100-192.168.19.200 as the image below shows
2. Log into the web-based management page of the WAVLINK router.
3. Go to LAN setup to change the LAN IP of your WAVLINK router to 192.168.19.2 ,make sure the
segment of your WAVLINK is same as the main router’s . Then disable the “DHCP” server of your
WAVLINK router as below image shows.
| General | Details |
|---|---|
| Name | WAVLINK AC1200 WiFi Router Instructions |
| Make | WavLink |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.08 MB |
If you have any questions regarding WAVLINK AC1200 WiFi Router Instructions, please ask here and describe the problem in detail.

WAVLINK WL-WN586X3-A AX3000 Wireless Dual Band Gigabit Mesh Router Instructions

WAVLINK AC1200 Wireless WiFi Router User Guide

WAVLINK AC1200 Dual Band Wi-Fi Extender/AP User Guide

WAVLINK AC1200 WiFi AP/Router Specifications

WAVLINK 575A3 Dual Band WiFi Extender Repeater Access Point Router Instruction Manual















