Home > westermo > westermo Merlin 4700 Series Cellular Router User Guide

westermo Merlin 4700 Series Cellular Router User Guide

4. Installation  
4.1. Mounting the Router  
The router is fitted with a DIN-rail clip by default. To attach the router to a DIN-rail:  
1. Position the router so that the spring of the DIN-clip rests on the DIN-rail.  
2. Push the router in an upward direction so that the spring of the DIN-clip compresses and the top hook of  
the DIN-clip slides and clamps to the DIN-rail.  
To remove the router from the DIN-rail, simply reverse the procedure.  
MOUNTING HEIGHT  
To reduce the risk of personal injury and damage to the device, the unit must not be mounted  
at a height greater than two metres above the ground beneath it.  
4.2. Cooling  
This product uses convection cooling. Spacing is recommended for the use of the product in full operating  
temperature range and service life. To avoid obstructing the airflow around the product, use the following  
spacing rules.  
Minimum spacing of 25 mm (1 inch) above/below and 10 mm (0.4 inches) left/right of the product is  
recommended.  
REDUCE THE RISK OF FIRE  
To reduce the risk of fire, use only telecommunication line cords with a cable diameter of  
AWG 26 or larger. Regarding power cable dimensions, see chapter Interface Specifications.  
4.3. Connecting Cables  
Connect one end of the Ethernet cable into port A and the other end to your PC or switch.  
4.4. Connecting the Antenna  
If only connecting one LTE antenna, screw the antenna into the MAIN SMA connector. If you are using more  
than one LTE antenna, screw the main antenna into the MAIN SMA connector and the secondary antenna into  
the WAN-AUX SMA connector.  
Be careful to select an antenna that ensures the equipment complies with local regulatory requirements.  
In North America, Westermo has indicated to PTCRB the following set of antennas for use with this equipment:  
Article Number Model  
160-00148  
160-00184  
2J 2J7724Ma - Cellular/LTE MIMO Magnetic Mount with two 3m LL100 leads, SMA Male  
2J 2J2183K-B07H-300LL195-C91GST - Cellular/LTE wall mount antenna with a 3m LL195 lead, SMA Male  
Table 9. List of antennas for use with this equipment in North America, as indicated to PTCRB  
16  
Merlin 4700 Series  
GeneralDetails
Namewestermo Merlin 4700 Series Cellular Router User Guide
Makewestermo
LanguageEnglish
FiletypePDF (Download)
File size0.84 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding westermo Merlin 4700 Series Cellular Router User Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

eighteen − 18 =

westermo Merlin 4700 Series VDSL Cellular Router User Guide
westermo Merlin 4700 Series VDSL Cellular Router User Guide
westermo MRD-405 4G LTE Router User Guide
westermo MRD-405 4G LTE Router User Guide
westermo MRD-455-NA Cellular Router User Guide
westermo MRD-455-NA Cellular Router User Guide
Westermo Merlin 4100 Series Cellular Router User Guide
Westermo Merlin 4100 Series Cellular Router User Guide
westermo 4400 Cellular Router User Guide
westermo 4400 Cellular Router User Guide

westermo Merlin 4700 Series Cellular Router User Guide