Home > WINEGARD > WINEGARD Converge Poplar Router Owner’s Manual

WINEGARD Converge Poplar Router Owner’s Manual

OUTDOOR INSTALLATION  
ONLY APPLICABLE FOR OUTDOOR ROUTER.  
Skip this page if you are only installing an Indoor Router Unit (IDU).  
1 Find a spot to mount Outdoor Router Unit (ODU) that is at least 24”  
from any other rooftop appliance or obstruction. This location should  
be as close to the centerline of the vehicle as possible and be as level  
as possible. The ODU will function best with ample clearance in all  
directions and by being level.  
24”  
Ensure Minimum Clearance  
24”  
24”  
Face Front Forward  
24”  
2 Mark the location where mounting the ODU and the location where  
the TetherPoint cable exits from the back of the ODU. Ensure that the  
WiFiRanger embossed logo is facing towards the front of the vehicle  
which improves aerodynamics.  
3 Trace and drill a 5/8” hole in the vehicle roof where the TetherPoint  
cable exits from the rear of the ODU. Alternately, route the cable inside  
vehicle through a window, entry vent, or other location to avoid making  
a penetration.  
4 Route the cable through the newly drilled hole or alternate entry to  
the location where wiring the ODU into power. It is recommended to  
protect the LAN and power port ends with electrical tape when pulling  
wires. See Interior Installation (next page) for further instructions to  
power the ODU.  
©2022 WIFIRANGER – A WINEGARD COMPANY  
|
208.321.5544  
|
OM_CON_IODU_v4  
|
PAGE 5  
GeneralDetails
NameWINEGARD Converge Poplar Router Owner’s Manual
MakeWINEGARD
LanguageEnglish
FiletypePDF (Download)
File size0.58 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding WINEGARD Converge Poplar Router Owner’s Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

two × 1 =

WINEGARD Converge Poplar Router Owner’s Manual