WINEGARD Converge Poplar Router Owner’s Manual
5 Thoroughly clean off the roof area where mounting the ODU and wait
to dry, ensuring full adhesion.
6 Once the cable is appropriately routed to the inside of the vehicle,
seal the hole around the cable with manufacturer recommended
sealant. Optionally, secure cable to roof using weather resistant tape.
7 Mount the ODU to the roof using either screws and sealant or sealant
only. If using screws and sealant, drill small pilot holes then snug
screws with dabs of sealant. If using sealant only, apply sealant on
base of ODU as shown for maximal adhesion. For either method, also
make a bead of sealant around the edge of the base plate (leave area
where cables exit unsealed). Do not cover the side wall, hood screws,
or seam of the case, allowing the upper hood to be removed for future
repairs or upgrades.
TOOLS & SUPPLIES
Select sealant, tape, and / or screws based on vehicle manufacturer recommendations
Not Drilling into Rooftop
Drilling into Rooftop
Rooftop Sealant
Drill + 5/8” Bit
Screws + Pilot Bit
Weather Resistant Tape
(ideal for securing cabling)
Rooftop Sealant
Weather Resistant Tape
(ideal for securing cabling)
©2022 WIFIRANGER – A WINEGARD COMPANY
SUPPORT@WIFIRANGER.COM 208.321.5544 OM_CON_IODU_v4
|
|
|
PAGE 6
| General | Details |
|---|---|
| Name | WINEGARD Converge Poplar Router Owner’s Manual |
| Make | WINEGARD |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.58 MB |
If you have any questions regarding WINEGARD Converge Poplar Router Owner’s Manual, please ask here and describe the problem in detail.









































