WIS HOME WIS-AC1200 WiFi Router User Guide
Package content
Install the radio
Internet via WAN PORT
1
2
3
1. Connect the WAN port of the device to the Internet with a network cable, and
O E Wi-Fi Router
Internet configuration method used as a single router
connect the LAN port of the device to the computer.
O
E
Wi-Fi Router
After the router is powered on, the power indicator light is green. After 90 seconds,
the system is successfully started, and the WiFi light is green.
2. Power on the device and login to the device management Web-page.
QuickSetupGuide
Wi-Fi Router
Models: WIS-AC1200,WIS-AC1200-POE
Wi-Fi Router
12VꢀDCꢀAdapter
Interface
LED
Interface
3. Click WAN Setting, click Edit to configure the WAN port parameters.
Internet
Off on
(The default is DHCP)
RST
POE
WAN/POEꢀOut
DC--12V
LAN2
LAN1
Off on
POE
RST
DC--12V
LAN2
LAN1
WAN/POEOut
Web configuration
4
1
2
3
5
4
3
2
1
1. Check all wires are correctly connected.
2. Configure the host system dynamic IP to get the IP from the router.
LED
Description
No.
1
Description
PoE Switch
On: WAN POE Out 24V
3. Using a web browser access 192.168.2.1 (wait a few seconds after device power up).
4. When login page appears enter “admin” in both the username and password fields.
5. For more configurations settings please visit the support site at www.wisnetworks.com.
Power
On: the radio is powered up
On:connected to the internet
Off: WAN POE Out disable
Internet
Off:not connected to the internet
WAN
Gigabit Mbps Enternet Port
2
3
4
On: the WiFi is available
Off: the WiFi is disabled
WLAN
LAN
Gigabit Mbps Enternet Port
Username :
Password :
Quick Setup Guide
DC
Input voltage 12V
English
Language :
Reset Button
Login
Press more than 8s to restore
factory settings
5
Wi-Fi Router
Models: WIS-AC1200,WIS-AC1200-POE
4. For more configurations like operating mode and wireless settings please visit the support
ATTENTION
The AC1200 does not support WAN POE out.
ATTENTION
site at www.wisnetworks.com.
Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections.
Safety Notices
RoHS/WEEE Compliance Statement
Limited Warranty
Wi-Fi Settings
Click "Network" and then" WiFi Settings" to modify the wireless configure.
1. Read, follow, and keep these instructions.
2. Heed all warnings.
Wisnetworks warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from
defects in material and workmanship for a period of one(1)ꢀ year from the date of shipment by
Wisnetworks under normal use and operation. Wisnetworks sole and exclusive obligation and liability
under the foregoing warranty shall be for Wisnetworks, at its discretion, to repair or replace any Product
that fails to conform to the above warranty during the above warranty period. The expense of removal
and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or
replaced Product shall not extend beyond its original term.
3. Only use attachments/accessories specified by the manufacturer.
European Directive 2002/96/EC requires that the equipmentbearing this symbol on the product and/or
its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste streams. It is your responsibility
to dispose of this and other electric and electronic equipment via designated collection facilities appointed
by the government or local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed information about the disposal of
your old equipment, please contact your local authorities, waste disposal service, or the shop where you
purchased the product.
WARNING:
Do not use this product in location that can be submerged by water.
WARNING:
Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
Warranty Condition
The above warranty does not apply if the Product:
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated
on the manufacturer’s label. Connection to a different power source than those specified may result
in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by
a qualified service technician.
FCC STATEMENT
(a) has been modified and/or altered, or an addition made thereto, except by Wisnetworks, or our
authorized representatives, or as approved by Wisnetworks in writing;
(b) has been painted, rebranded or physically modified in any way;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
Typical Applications
(c) has been damaged due to errors or defects in cabling;
(2) This device must accept any interference received, including interference that may cause undesired
operation.
(d) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical
stress, including lightning strikes, or accident;
3. This equipment is provided with a detachable power cord which has an integral safety ground wire
intended for connection to a grounded safety outlet.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
(e) has been damaged or impaired as a result of using third party firmware;
(f) has no original Wisnetworks MAC/SN label, or is missing any other original Wisnetworks label(s);
(g) human reasons without according to the guide or user manual.
a. Do not substitute the power cord with one that is not the provided approved type. Never
use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the
grounding wire.
LTE CPE
NOTE: This equipment has been tested and found to comply withthe limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
2.4G
b. The equipment requires the use of the ground wire as a part of the safety certification,
modification or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions about the installation
prior to connecting the equipment.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can bedetermined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
In addition, the above warranty shall apply only if: the product has been properly installed and used at
all times in accordance, and in all material respects, with the applicable Product documentation; all
Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is
used, and for indoor installations, indoor cabling requirements are followed.
5G
Router
LTE Base Station
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide
appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and
regulations.
Increase the separation between the equipment and receiver.
Online Support
Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Marking
For more guide and help, please go to
This equipment complies with FCC radiation exposure limitsset forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
CE marking on this product represents the product is in compliance with all directives that are applicable
to it. Alert sign must be indicated if a restrictionon use applied to the product and it must follow the CE
marking.
ATTENTION
You can contact email
If you use other PoE Adapter which is not provided by Wisnetworks, we can’t provide warranty
service if device damage caused.
We’ll reply you within one weekday.
Scan for more product information
| General | Details |
|---|---|
| Name | WIS HOME WIS-AC1200 WiFi Router User Guide |
| Make | WIS HOME |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.97 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding WIS HOME WIS-AC1200 WiFi Router User Guide, please ask here and describe the problem in detail.
MERCURY 6220 Wireless Dual-Band Router Instructions
Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide
TP-Link VR2100v Wireless Mu Mimo VDSL ADSL Modem Router Instruction Manual
Ibex-RT-630-5G Series EN 50155 5G and WLAN Router User Manual
NEXXT Nyx1200-AC Plus Dual Band AC Wireless Router User Guide
ASUS RT-AX82U Dual Band Wi-Fi Router User Guide
ZTE MF920U 4G LTE Wireless Router User Guide
Tenda 4G03 Pro 4G LTE Router Installation Guide
DrayTek Vigor2862 VDSL2 Router Instructions
Ruijie 42301 Dual Band Gigabit Wireless Router Installation Guide