Woodline DadoRight Dado Jig for Router Instructions
Cutting A Dado
Place the DadoRight™ over the guide clamp and adjust the
position of the guide clamp to the desired location and lock the guide
clamp in place. The DadoRight™ pivot plate contains an alignment
indicator that will closely correspond to the left edge of the dado when
the pivot plate is against the left stop. It is best to make a test cut and
compare the actual position with the indicator. Any variation is the result
of mounting the router a little off-center or runout in the router. A user
can quickly note the alignment of the test cut versus the indicator and
use this knowledge to set up future cuts accurately and easily.
Align the proper notch to
match your bit size. 1/4"
bit shown.
DO NOT TURN ON THE ROUTER BEFORE INSERTING THE ROUTER
COMPLETELY INTO THE JIG. DAMAGE TO THE JIG AND POSSIBLE SERIOUS
INJURY MAY OCCUR.
Once the clamp is in position, place the jig over the guide with the center hole located off
the edge of the material. Place the router with the bit set to the desired depth onto the jig. If using
a bushing, make sure the router is fully inserted into the pivot plate. Firmly hold the router and jig
assembly while simultaneously gently pressing the assembly to the left so the pivot plate is against
the left side of the jig (toward the guide clamp).
Turn on the router, and with a slow, smooth action, slide the assembly along the guide
clamp making a cut. Once the end of the cut is reached, and without turning off or lifting the router,
move the pivot plate against the right-hand set plate and slide the jig assembly along the guide
toward the user. Repeat sliding the jig assembly as necessary to clean out the middle of the dado.
The router cannot move outside the area of your perfect dado.
Turn off the router and wait until the bit stops turning. Then and only then can you
remove the router and jig from the workpiece.
The DadoRight™ is the perfect solution for perfect dados quickly and easily.
Woodline USA can supply replacement parts for any damaged items. Some woodworkers
may also like to have an extra pivot plate for other routers. If you damage the jig by accidentally
lifting the router bit while it is still turning, just give us a call. We sell replacement parts for a
reasonable price.
For videos and additional instructions visit Woodline.com and select the “INSTRUCTIONS”
tab. We recommend that all users read these instructions carefully and visit our website for
updates and additional information.
If you have any questions, call customer service at 1-800-472-6950 during normal business
hours, 8-4 Central Time, Monday through Friday.
©2017 Woodline USA. All rights reserved. DadoRight™ is a trademark of Woodline USA
Inc. Patent pending.
| General | Details |
|---|---|
| Name | Woodline DadoRight Dado Jig for Router Instructions |
| Make | Woodline |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.22 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Woodline DadoRight Dado Jig for Router Instructions, please ask here and describe the problem in detail.
TP-Link Archer AC1900 MU MIMO Wi-Fi Router Installation Guide
xiaomi RB02 AC1200 Gigabit Router User Manual
ReadyNet AX1500M WiFi6 Wireless Router User Guide
Helmholz 700-875-WIF51 REX 100 Router User Guide
triton TWX7 Router Table Module Instruction Manual
Spectrum 20240729 WiFi 6E Router User Guide
TP-Link AX3000 Wi-Fi 6 Air Router Installation Guide
inseego 5G Router FX2000e User Guide
xiaomi AX3200 Wifi 6 Dual Band Router User Manual
Firstnum C401 CPE Router User Manual