Home > Zetronix > Zetronix WiFi Network Router User Manual

Zetronix WiFi Network Router User Manual

Getting Started  
Powering Up  
Connect an AC/USB power adapter to the camera power port  
using the included USB cable.  
Camera Device  
Insert a MicroSD memory card to the card slot for motion detection  
or continuous recording function.  
To determine if it is on and broadcasting, please reffer to the next  
section for when you scan for WiFi networks.  
Camera Reset  
Resetting the camera device to factory default will fix most issues.  
When the camera is on, you may press and hold the reset button  
for 5 seconds, the camera will restart with factory settings.  
Please refere to the Tonga Rouder manual for the router  
functions: Http://  
Camera & phone application setup  
I. Camera Operation Modes  
Red light is the power indicator, which is always on when the power  
is on. Blue light is WIFI indicator.  
Wifi indicator modes:  
1. Point-to-point mode: Blue light flashes slowly  
2. Configuration of remote camera completed: Blue light is always on  
Note: If you are not clear what mode it is active, reset the camera  
and switch to point-to-point mode.  
Note: This reset works only when the blue light is always on or  
flashes slowly. Press the Reset key for about 5 seconds until all the  
indicators go out, and let go until the camera starts (about 30  
seconds).  
GeneralDetails
NameZetronix WiFi Network Router User Manual
MakeZetronix
LanguageEnglish
FiletypePDF (Download)
File size0.5 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding Zetronix WiFi Network Router User Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

19 − 19 =

Zetronix WiFi Network Router User Manual