ZLWL ZR2720N Router User Guide
3) This router support wired connection, the configuration is similar with
cellular network. Click Basic Network > Wired Network > WAN, choose
“DHCP client” (Optional PPPoE, Static address) as the Protocol, click SAVE
& APPLY button.
4) This router support Wi-Fi client mode for connection, detail please refer
to user manual.
3.Connect PC and Terminal to Router
There are two methods to connect PC and terminal to router. One is
connect with Ethernet cable, and another is connect through Wireless
Access Point. Please refer to the steps below.
3) Check the cellular connection status
1) Ethernet cable connection (Wired)
Click System Status > 4G WAN Status to view the status of the cellular
connection, the details status information will be displayed.
Connect an Ethernet cable to the LAN port of the router, and connect the
other end of the cable to your computer or terminal. Obtain an IP address
automatically from “Local Area Connection”, or to configure a static IP
address manually, detail please refer to page 4 “PC Configuration”
Note:
1) This router support IoT and VPDN card of multiple carriers.
2) Generally, this router will identify APN information automatically. When
dail-up fail with some IoT card and VPDN card, please contact your carrier
and fill in the AP data such as username, password to configuration then
get cellular connection.
2) Wireless Access Point
To log in to the router management page, please refer to Page 6 “Router
Configuration”
Click Basic Network > Wireless Network> Wireless Overview, click EDIT
button
7
| General | Details |
|---|---|
| Name | ZLWL ZR2720N Router User Guide |
| Make | ZLWL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.29 MB |
If you have any questions regarding ZLWL ZR2720N Router User Guide, please ask here and describe the problem in detail.























