AKYPACH B0C28L468H Wood Router Instruction Manual
AKYPACH
Using the Trimmer Guide:
Trimming thin stock or veneers can be accomplished with a 1/4” straight bit and
the trimming guide.
Install the bit into the collet and adjust the bit height to just slightly taller than the
stock you will be trimming.
Using the clamping screw, secure the trimming guide to the router base so that
the ball bearing guide is located just below the straight bit, but make sure the bit
does not contact the roller bearing assembly.
To adjust the roller flush with the edge of the router bit, loosen clamping screw
on the trimmer guide. Use the lower knob on the trimmer guide to adjust the position
of the roller flush with the bit.
Once they are flush, secure the position of the roller by tightening clamping screw.
When you make your cut, the roller will follow the substrate, which will act as your
template while the router bit trims the thin stock or veneer flush to the substrate.
The roller can also be offset to allow a slight overhang when working with veneer
and you prefer to butt the vertical and horizontal veneer pieces and sand the edge
to relieve the sharp corner.
Replace carbon brushes
Inspect carbon brushes regularly. Replace brushes when they are worn to the limit
wear line. Keep the brushes clean and free to slide in the brush holder. Both brushes
should be replaced at the same time. Use only the same brushes.
1.Use a screw driver to remove the brush holder cover.
2.Remove worn carbon brushes, insert new brushes, and tighten brush holder cover.
- 14 -
| General | Details |
|---|---|
| Name | AKYPACH B0C28L468H Wood Router Instruction Manual |
| Make | AKYPACH |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.4 MB |
If you have any questions regarding AKYPACH B0C28L468H Wood Router Instruction Manual, please ask here and describe the problem in detail.

AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual

AKYPACH A2 Wood Router Instruction Manual

AKYPACH 15PCS Wood Router Instruction Manual




























