TP-Link BE550 Tri Band WiFi 7 Router Installation Guide
LED Explanation
Button Explanation
1 Connect the Hardware
2 Set Up the Network
Method ONE: Via the TP-Link Tether App
Unplug the power
ꢀ Unplug the power to turn off your modem, if any, and remove the backup battery if it has one.
ꢀ Keep the router vertical while working. Refer to Q5 of Need Help? to place the router for optimal
Wi-Fi performance.
Method TWO: Via a Web Browser
1. Connect your device to the router wirelessly or
with an Ethernet cable.
You can check the router’s working status by
following the LED Explanation.
Three physical buttons are located on the front
of the router.
1. Download the Tether app.
Modem
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s 10G Internet port to it, and then follow steps 3 and 4 to complete the hardware connection.
Cycling
The system is starting up or the
router is being upgraded. Do not
disconnect or power off your router.
or
The default wireless
network names (SSIDs) and
Connect the powered-off modem to the router’s
10G Internet port with an Ethernet cable.
Scan for Tether
Tether
1
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
password are printed on
*Images may differ from your actual
2. Open the Tether app and log in with your
TP-Link ID.
Note: If you don’t have an account, create one first.
SSID:TP-Link_XXXX_5G
SSID:TP-Link_XXXX_6G
products.
the label at the back of the
router.
Solid
The router is working normally.
Establishing a WPS connection.
All LEDs
Internet
2. Launch a web browser and enter
the address bar. Create a password to log in.
3. Tap the button in the Tether app, select
Wireless Router, and find your model.
Follow the steps to complete the setup
and connect to the internet.
Note: Due to Tether app updates, your actual user
interface and pathway may differ from those
depicted here.
Blinking
Top 10 LEDs
Solid
LED Exclamation Point
The router is disconnected from
the internet.
WPS Button
Wi-Fi Button
LED Button
Note: If the login window
New Password:
does not appear, please
Blinking
LED Exclamation Point
The router is disconnected from
the internet, and Wi-Fi is off.
Power on the modem, and then wait about
2 minutes for it to restart.
refer to Q1 of Need Help?
in this guide.
Press the WPS button, and immediately press the WPS
button on your client device to start the WPS process.
Confirm Password:
Let’s Get Started
Press and hold this button for about 2 seconds to turn on or
off the wireless function of your router.
Choose Your Device Type
Connect the power adapter to the router.
Blinking
All LEDs
Wi-Fi is off.
3
Wireless Router
Then press the Power button
to turn
Wait until the LED is solid on
(LED Exclamation Point or All
LEDs).
4
3. Follow the step-by-step instructions to set up
the internet connection and register for the
TP-Link Cloud service.
Press the LED button to turn on or off the LED of your router.
on the router.
Gaming Router
Off
Power is off or the LED is turned
off.
Or
To enjoy a more complete
service from TP-Link, bind
Range Extender
your TP-Link ID to the router.
| General | Details |
|---|---|
| Name | TP-Link BE550 Tri Band WiFi 7 Router Installation Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.6 MB |
If you have any questions regarding TP-Link BE550 Tri Band WiFi 7 Router Installation Guide, please ask here and describe the problem in detail.

TP-Link VR300 Archer Modem Router User Guide

TP-Link T150500-2-DT WiFi Router Instruction Manual

TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide

TP-Link Omada ER8411 VPN Router Instructions

TP-Link Configure VDSL Router User Guide

TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual

TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide

TP-Link VR600 Wireless DSL Modem Router Installation Guide

TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide

TP-Link AC750 Wireless Dual Band Router Owner’s Manual













