dahua DH-AX30 Wireless Router User Manual
Indicator
3
You can initialize the device and log in to it through the device webpage
and WiLynk app.
●
To ensure heat dissipation, the gap between the device and the
surrounding area should not be less than 10 cm on the sides and
10 cm on top of the device.
Foreword
Important Safeguards and Warnings
Table 1-1 Indicator description
This manual introduces the installation, functions and operations of the
DH-AX15M device (hereinafter referred to as "the Device"). Read carefully
before using the device, and keep the manual safe for future reference.
Safety Instructions
This section introduces content covering the proper handling of the
device, hazard prevention, and prevention of property damage. Read
carefully before using the device, and comply with the guidelines when
using it.
Status
Indicator description
●
●
When installing the device, make sure that the power plug and
appliance coupler can be easily reached to cut off power.
3.1
You can initialize the device and log in to the app to configure the device.
Soild green
Soild red
Configuration complete and the Internet access is normal
Voltage stabilizer and lightning surge protector are optional depending
on the actual power supply on site and the ambient environment.
Routing waiting configuration or line anomalies, or the
system booting
The following signal words might appear in the manual.
Operation Requirements
The router is pairing with the sub -route; WPS processing
in 120s
●
Red flashes
(slow)
●
Transport the device under allowed humidity and temperature
conditions. Refer to the technical parameters for requirements on
the transporting temperature and humidity of the device.
For the first time use or after the device is restored to its factory
defaults, you need to initialize the device.
S ignal Words
Meaning
Indicates
a
high potential hazard which, if not avoided, will result in
Red flashes
(fast)
To protect your device, keep the admin login password safe after
initialization, and change the password regularly.
●
●
System upgrade
●
●
●
●
Do not disassemble the device without professional instruction.
Operate the device within the rated range of power input and output.
Make sure that the power supply is correct before use.
Make sure the device is powered off before disassembling wires to
avoid personal injury.
death or serious injury.
Storage Requirements
Off
The router is powered off or the light is manually turned off
For more details on app configuration, go to Me > User Manual
on WiLynk.
Indicates
a
medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
Connection Diagram
DH-AX30
User’s Manual
●
Store the device under allowed humidity and temperature
3.1.1 Downloading App
Indicates
a
potential risk which, if not avoided, could result in property
conditions. Refer to the technical parameters for requirements on
the storing temperature and humidity of the device.
Figure 2-1 Connection diagram
●
Do not unplug the power cord on the side of the device while the
adapter is powered on.
Scan the QR code to download the WiLynk app.
Figure 3-1 QR code
damage, data loss, reductions in performance, or unpredictable
results.
Installation Requirements
Connect your device to the
router through wireless.
P rovides methods to help you solve
P rovides additional information as
a
problem or save time.
Connect to modem.
●
●
●
Use the device under allowed humidity and temperature conditions.
Operating temperature: 0°C–40 °C (14 °F–104 °F)ns.
a
supplement to the text.
4
5
3
Modem
●
2
1
Do not connect the power adapter to the device while the adapter
is powered on.
Ethernet cable
This is a class A product. In a domestic environment this may cause
radio interference in which case you may be required to take
adequate measures.
About the Manual
●
Connect your device to the
router through Ethernet cable.
Strictly comply with the local electrical safety code and standards.
Make sure the ambient voltage is stable and meets the power
supply requirements of the device.
OR
Socket
RESET WPS
WAN
LAN1
LAN2
LAN3
POWER
●
The manual is for reference only. Slight differences might be found
between the manual and the product.
Connect to Internet port.
●
Do not drop or splash liquid onto the device, and make sure that there
is no object filled with liquid on the device to prevent liquid from
flowing into it.
Network port
Ethernet cable
Power
You can also search for WiLynk at the app store, and then download it.
3.1.2 Registering Accounts
●
●
We are not liable for losses incurred due to operating the product in
ways that are not in compliance with the manual.
●
Do not leave outdoor models of the device hanging in the air or
facing outwards when installing onto poles that are on top of
buildings.
Ethernet cable
Ethernet cable
The manual will be updated according to the latest laws and
regulations of related jurisdictions. For detailed information, see
the paper user’s manual, use our CD-ROM, scan the QR code or
visit our official website. The manual is for reference only. Slight
differences might be found between the electronic version and the
paper version.
●
●
Do not block the ventilator of the device with objects, such as a
newspaper, table cloth or curtain.
Table 2-1 Rear panel description
Description
Procedure
Step
Step
1
2
Open WiLynk, tap Register, and then enter the Register page.
Do not place an open flame on the device, such as a lit candle.
No.
Select the country or region, enter the email address or phone
number, enter the password, and then confirm it.
●
●
Do not place the device in a place exposed to sunlight or near
heat sources.
Reset button. Press and hold the button for more than 5
seconds
Maintenance Requirements
1
Put the device in a well-ventilated place, and do not block its
ventilation.
2
3
WPS button. Short press for WPS function.
●
●
There might be errors in the print or deviations in the description of
the functions, operations and technical data. If there is any doubt or
dispute, we reserve the right of final explanation.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Phone number is only supported in select countries.
●
●
Power off the device before maintenance.
WAN port. Connects to the modem or Ethernet port.
●
●
Use an adapter or cabinet power supply provided by the
manufacturer.
Do not connect the device to two or more kinds of power supplies,
to avoid damage to the device.
Address: No. 1399, Binxing Road, Binjiang District, Hangzhou, P. R. China Postcode: 310053
Tel: +86-571-87688888 28933188
Mark key components on the maintenance circuit diagram with
warning signs.
Step
3
Tap the I have read and agree checkbox.
You can click to view the user service agreement and privacy policy.
LAN port. Connectsto wired devicessuch as computers and
set top boxes.
4
5
Upgrade the reader software or try other mainstream reader
software if the manual (in PDF format) cannot be opened.
Step
Step
4
5
Click Send.
Power port. Connects to the power supply
Enter the verification code, and then click OK.
2E202A611V10
3.2
You can initialize the device and log in to it through the device webpage.
Step
8
Enter the WLAN Setting page, set Wi-Fi name, password and
power, and then click Save.
Figure 3-7 Network settings
Figure 3-3 Preparations for adding device
Figure 3-4 Add devices
Figure 3-5 Configure time zone and Wi-Fi network
Figure 3-2 Registration
Edit
Figure 3-8 WLAN settings
Procedure
Step
1
The end device connects to the router through wired
and wireless connection. Enter the device domain name
DHCP
*Network ConnectionType
If the network segments of Wan IP and LAN IP have a conflict,the device cannot access thhe
network. Please modify the configuration of the network segment for the LAN port.
1
2
3
4
(
to the device to configure settings.
) or device IP(default IP 192.168.10.110) to log in
WLAN
NetworkSettings
LinkDetection
Complete
WLANPassword
Same asthe deviceloginpassword
Please find the router, power adapter and network cable.
Successfully added the device.Please configure the Wi-Fi
network.
Auto Obtain DNS
Manually Set DNS
DNSSetting
Step
Step
2
3
.
Time Zone Setting
Click OK
Dual-band 2.4/5G
The verification code was sent to 515306230@qq.com
Dual-band 2.4/5G
Time Zone (UTC+08:00) Beijing,Chongqing,Urumql, ...
Usethe same settingsforboth2.4Gand5G.The enddevicewillchoose theone withthe bettersignal.
Select the I have read and agree to the terms of the Software
License Agreement and Privacy Policy checkbox, and then
click OK.
Use the same settings for both 2.4G and 5G. The end device will
choose the one with the better signal.
Please select the country or region.
2.4G WLAN
Cancel
Definite
DST
*
SSID
DAHUA_531972
Email/Phone No.
Wi-Fi Name
Use the power adapter to connect the router and power supply,
and the network cable to connect the optical modem and router.
Step
4
Ifyou connecttothisWLAN,thesystemwilluse 2.4 GHz.
For the first-time login,you need to set the login password,and then
click NEXT.
DAHUA_531972
Please try again in 56 seconds.
No devices
Add Device
Edit
Please configure the password.
* Password
Please enter the password.
Same as the device login password
Step
Step
5
6
Enter the login password, and then enter the web page.
It must consist of 8-32 characters that contain letters,numbers
and special characters. Spaces and the following special
* Power High
Static
*Network ConnectionType
characters are not allowed
‘
”
:
,
&
For the first-time login,the device will pop up a setup wizard.
OK
Power
High
If the network segments of WAN IP and LAN IP have a conflict,the device cannot accrss the
network. Please modify the configuration of the network segment for the LAN port.
After the router is powered on and the indicator light turns on,
* SSID
DAHUA_5G_531972
Step
7
Confirm Password
WAN settings: You can change the networking method (default
DHCP), click the icons to change, and then click Next.
wait for 2 minutes to configure the network.
Ifyou connecttothisWLAN,thesystemwilluse 5GHz.
* IP Address
* SubnetMask
Send
* Password
* Power
Please enter the password.
High
Figure 3-6 WAN settings
* Default Gateway
* Preferred DNS
Altemate DNS
I have read and agree
Previous
Next
User Service Agreement Privacy Policy
1
2
3
4
NetworkSettings
WLAN
LinkDetection
Complete
WANPortList
NetworkConne
Step
Step
2
Scan the QR code on the device, or tap Select Type of the device, and
then enter the SN.
Go to the Wi-Fi settings on your system settings, connect the router
SSID, and then tap Next.
IP Address
MAC
Status
Operation
3.1.3 Adding Devices
Prerequisites
ctionType
1
2
3
4
DHCP
192.168.12.37
00:e0:4c:31:11:8e
CONNECTED
Definite
Cancel
3
WLAN
NetworkSettings
LinkDetection
Complete
Make sure that the device is connected with power and modem. After the
device is powered on, wait for 2 minutes, and then add devices.
WLANPassword
Same asthe deviceloginpassword
Step
Step
Step
Step
4
5
6
7
Configure the login password of the device, and then tap Next.
Dual-band 2.4/5G
Edit
Usethe same settingsforboth2.4Gand5G.The enddevicewillchoose theone withthe bettersignal.
Configure the networking method of the device, and then tap Next.
Procedure
* SSID
DAHUA_531972
*Network ConnectionType
PPPoE
Wait until the screen prompts Connect to Internet, and then tap Next.
Step
1
●
●
On the Status page, tap Add Device or
on the right-upper corner.
If you can access Internet without any settings on your
bandwidth, select DHCP as the networking method.
If your bandwidth cannot obtain IP address automatically,
contact network administrator or bandwidth service provider,
select Static IP as the networking method, and then enter
The systemwill automaticallychoosethe better frequencyband.
If the network segments of WAN IP and LAN IP have a conflict,the device cannot accrss the
network. Please modify the configuration of the network segment for the LAN port.
Configure the time zone and DST of the device, configure the device
SSID, and then tap Next to finish the configuration.
* Password
* Power
Please enter the password.
High
* Broadband Account
* Broadband Password Please enter the password
related information as guided.
If you need to enter the account and password to access
Previous
Next
●
Internet, select PPPoE as the networking method, and then enter
bandwidth account and bandwidth password.
Cancel
Definite
| General | Details |
|---|---|
| Name | dahua DH-AX30 Wireless Router User Manual |
| Make | Dahua |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding dahua DH-AX30 Wireless Router User Manual, please ask here and describe the problem in detail.
dahua AX1500 Wi-Fi6 Wireless Router Instruction Manual
dahua N300 Wireless Router User Guide
dahua DH-MAX18-3 MAX18 Mesh Wireless Router User Guide
IMOU AX3000 Wi-Fi 6 Smart Router User Guide
TP-Link TL-WR841N Wireless N Router Installation Guide
CNCU E550 EasyRoute CNC Router Instructions
NETGEAR RS200 Nighthawk WiFi 7 Dual Band Router Owner’s Manual
Tenda 4G185 4G/3G Portable Mobile Hotspot Router User Guide
GlocalMe G4 Pro 4G LTE Mobile WiFi Router User Guide
Draytek Vigor167 Modem Router User Guide
NETGEAR R6300 WiFi Router Instruction Manual
LINKSYS MX4200 Router Installation Guide
POYNTING EPOYNT-4 Outdoor LTE-5G Antenna and Router Enclosure User Guide