FESTOOL OF 1010 REBQ Electric Handheld Router Instructions

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

English  

6.1 Switching on/off  

The switch [1-14] is an on/off switch (press =  

ON, release = OFF).  

5

Parts of the device  

Router table  

[1-1]  

The on/off switch with the locking button [1-12]  

can be engaged to operate in continuous mode.  

Press the on/off switch again to release the  

lock.  

Stepped stop  

[1-2]  

Depth stop  

[1-3]  

Locking for trammel unit  

Nut  

[1-4]  

[1-5]  

7

Settings  

Spindle stop  

[1-6]  

WARNING  

Handle/Height adjustment  

Clamp lever  

[1-7]  

Risk of injury, electric shock  

[1-8]  

► Always disconnect the mains plug from the  

socket before performing any work on the  

machine.  

Fine adjuster  

[1-9]  

Depth stop indicator  

Speed adjusting wheel  

Locking button  

Handle  

[1-10]  

[1-11]  

[1-12]  

[1-13]  

[1-14]  

[1-15]  

[1-16]  

7.1 Electronics  

Speed adjustment  

You can continuously adjust the speed within  

the speed range using the adjusting  

wheel [1-11] (see "Technical data").  

On/off switch  

Extractor connector  

This enables you to optimise the cutting speed  

to suit each surface.  

Grooves for guide bars/parallel side  

fence  

Material  

Cutterdiameter [mm] Recom-  

mended  

3 - 14 15 - 25 26 - 35  

cutter ma-  

The specified illustrations appear at the begin-  

ning of the Operating Instructions.  

Accessories shown or described are not always  

included in the scope of delivery.  

Rotary controll setting  

terial  

Hardwood 6 - 4  

Softwood 6 - 5  

5 - 3  

6 - 3  

6 - 3  

3 - 1 HW (HSS)  

4 - 1 HSS (HW)  

4 - 2 HW  

6

Commissioning  

Laminated 6 - 5  

chipboard  

WARNING  

Plastic  

6 - 4  

3 - 1  

5 - 3  

2 - 1  

2 - 1 HW  

Unauthorised voltage or frequency.  

Risk of accidents  

Alumini-  

um  

1

HSS (HW)  

► The mains voltage and the frequency of the  

power source must correspond to the  

specifications on the name plate.  

► In North America, only Festool machines  

with the voltage specifications 120 V/60 Hz  

may be used.  

Plaster-  

2 - 1  

1

1

HW  

board  

Temperature cut-out  

Electronic temperature monitoring is integra-  

ted in order to protect against overheating (mo-  

tor burnout). The safety electronics system  

switches off the motor before a critical motor  

temperature is reached. Let the machine cool  

down for approximately 3–5 minutes before us-  

ing it and/or fully loading it again. The cool-  

down time is significantly reduced when the  

machine is running (no-load).  

CAUTION  

Heating of the Plug it connection if bayonet  

fitting is not completely locked  

Risk of burns  

► Before switching on the power tool, make  

sure that the bayonet fitting at the mains  

cable is closed fully and locked.  

Restart protection  

The built-in restart protection prevents the  

power tool from starting up again automatically  

if the power is disconnected when the on/off  

switch is pressed. In this case, the power tool  

► Connect and disconnect the mains power  

cable - [2].  

17  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	FESTOOL OF 1010 REBQ Electric Handheld Router Instructions
Make	FESTOOL
Language	English
Filetype	PDF (Download)
File size	2.81 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• FESTOOL

Questions and Answers (0)

If you have any questions regarding FESTOOL OF 1010 REBQ Electric Handheld Router Instructions, please ask here and describe the problem in detail.