HITACHI M 12SA2 Bit Machine Molding Router Instruction Manual

English  

INSTALLING AND REMOVING BITS  

WARNING: Be sure to switch power OFF and disconnect the plug from the  

receptacle to avoid serious trouble.  

1. Installing bits  

(1) Clean and insert shank of bit into the collet  

Lock pin  

Wrench  

chunk until shank bottoms, then back it out  

approximately 1/16” (approx. 2 mm).  

Loosen  

(2) With the bit inserted and pressing the lock  

pin holding the armature shaft, use the 23  

mm wrench to firmly tighten the collet chuck  

in a clockwise direction (viewed from under  

the router). (Fig. 2)  

(3) When using the 1/4” diameter shank bit,  

replace the equipped collet chuck with the  

one for 1/4” diameter shank bit which is  

provided as the standard accessory.  

Tighten  

Fig. 2  

CAUTION:  

ⅷ

ⅷ

Ensure that the collet chuck is firmly tightened after inserting a bit. Failure to do so  

will result in damage to the collet chuck.  

Ensure that the lock pin is not inserted into the armature shaft after tightening the  

collet chuck. Failure to do so will result in damage to the collet chuck, lock pin and  

armature shaft.  

2. Removing bits  

When removing the bits, do so by following the steps for installing bits in reverse  

order.  

CAUTION:  

ⅷ

Ensure that the lock pin is not inserted into the armature shaft after tightening a bit.  

Failure to do so will result in damage to the collet chuck, lock pin and armature shaft.  

11  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	HITACHI M 12SA2 Bit Machine Molding Router Instruction Manual
Make	Hitachi
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Hitachi

Questions and Answers (0)

If you have any questions regarding HITACHI M 12SA2 Bit Machine Molding Router Instruction Manual, please ask here and describe the problem in detail.