HITRON CODA-4582 Cable Modem Router User Guide
Check the Box Contents
QUICK START GUIDE
STEP
Look in the box and make sure you have the following:
HITRON
Read me
CODA-4582/ 4682/ 4782
1
first!
POWER CORD
CODA-4582/ 4682/ 4782
ETHERNET CABLE
QUICK START GUIDE
Connect to the network
Set up your wireless network
The Hitron CODA-4582/ 4682/ 4782 is an application gateway that provides
wired and wireless high-speed Internet access as well as optional MoCA
(Multimedia over Coax Alliance) networking to the Ethernet-enabled
devices in your home for a fast and easy home entertainment network.
Connect to a Cable Outlet
Connect to a Power Outlet
STEP
STEP
Use a coaxial cable (not included) to connect the device’ s CABLE
connector to a cable outlet.
Use the power cord provided to connect the POWER port to a power
outlet.
2
3
Connect to an Ethernet-Equipped Device (Optional)
User Configuration (Optional)
STEP
STEP
In a web browser, enter 192.168.0.1 in the address bar followed by
Use the Ethernet cable provided to connect one of the LAN ports
Username and Password, as below.
to an Ethernet-equipped device.
5
4
cusadmin
password
Connect with Wireless Devices (Optional)
Setup Complete
STEP
STEP
Connect your wireless devices with the correct SSID and Passphrase.
Congratulations! You have successfully set up your CODA-4582/
If you have not changed them, the default values are indicated on
4682/ 4782.
the sticker on the back of the unit.
6
7
If you have any problems, see the section below for help in
identifying the cause.
Connect your wireless devices with the WiFi
Protected Setup (WPS). Access the configuration
interface (see step 5), enter the Wireless page
to enable WPSand set Encrypt Mode to AES,
then press Save Changes.
IP Addresses
If the CODA-4582 is successfully connected to the network (see LED Display)
but you cannot access the Internet from a connected computer, your
computer’ s IP Address may be set up improperly. In your computer’ s
network settings, ensure that it is configured to either receive an IP
address automatically (recommended) or that it has a static IP address in
the 192.168.0.10~192.168.0.254 range. For more information, consult your
operating system’ s Help documentation.
Press this button to begin the WPSPush-Button
Configuration (PBC) procedure. Press the PBC
button on your wireless clients in the coverage
area within two minutes to enable them to j oin
the wireless network.
| General | Details |
|---|---|
| Name | HITRON CODA-4582 Cable Modem Router User Guide |
| Make | Hitron |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding HITRON CODA-4582 Cable Modem Router User Guide, please ask here and describe the problem in detail.
hitron ARIA2513 Wifi Router Installation Guide
hitron CGNM-2250 Cable Modem Router User Guide
hitron CODA-4589 Cable Modem Router User Guide
hitron CODA5x1xQ Series Cable Modem Router User Guide
hitron CHITA3.1 CHITA-RES Cable Modem Router User Guide
SIEMENS PXG3.L BACnet Router Instruction Manual
LINKSYS E1000 Wireless N Router Instruction Manual
PoEWit R10 Preconfiguration Enterprise Class Router User Manual
ASUS RT-AX57 Go AX3000 Dual Band Wi-Fi 6 Router User Guide
TAIKO AUDIO ES9039MSPRO Extreme Switch Router Instruction Manual
inseego 5G Router FG2000e User Guide
D-Link DWR-M930 Wireless 4G LTE Router User Guide
NETGEAR RS100 Wi-Fi 7 Router Instructions
Rockwell CCR-3000 Router User Guide
AZORES AX3000 PRO WiFi-6 Wireless Router Instruction Manual