HOLZMANN MASCHINEN OBF1200_230V Hand Held Devices Router User Manual

ASSEMBLY  

Requirements for the installation site  

The chosen installation site must ensure a suitable connection to the power supply and a  

connection to an extraction system. Observe the safety requirements and the dimensions of the  

machine. Place the machine on a level, solid surface. The chosen location of the machine must  

comply with the local safety regulations and the ergonomic requirements for a workplace with  

sufficient lighting conditions.  

Preparation of the surfaces  

Before putting the machine into operation, carefully remove the corrosion protection or grease  

residues from the bare metal parts. This can be done with the usual solvents. Under no  

circumstances should you use nitro thinners or other cleaning agents, as these can attack the  

machine´s finish.  

NOTE  

The use of paint thinners, petro, aggressive chemicals or scouring agents will damage  

the surfaces!  

Therefore: Use only mild cleaning agents!  

12.2  

Assemble  

The machine comes fully assembled. For the different operations, the following assemblies / cutters  

/ collet chuck changes can be made as follows.  

Mounting extractor adapter  

Mount the extractor adapter to the routing shoe (1) with  

the two countersunk screws and nuts.  

Connect the extraction system to the machine at the  

opening (2) provided in the extraction adapter (inner  

diameter 36 mm).  

Mounting parallel stop  

Loosen the screws of the guide rods. Screw the guide  

rods to the parallel stop (3).  

Push the guide rods through the side holes of the  

routing shoe (4).  

Set the desired dimension and fix this with the fastening  

screws (5).  

Assembling compass point  

Slide the compass point onto the end of a guide rod and  

screw it tight with the wing nut (6).  

Push the guide rod into a hole of the routing shoe. Set  

the desired radius between the compass tip and the  

routing tool and fix the position with the fastening  

screw (7).  

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at  

30  

OBF1200_230V  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	HOLZMANN MASCHINEN OBF1200_230V Hand Held Devices Router User Manual
Make	HOLZMANN MASCHINEN
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• HOLZMANN MASCHINEN

Questions and Answers (0)

If you have any questions regarding HOLZMANN MASCHINEN OBF1200_230V Hand Held Devices Router User Manual, please ask here and describe the problem in detail.