Ibex-RT-630-5G Series EN 50155 5G and WLAN Router User Manual

2. Power the product.  

3. Wait until factory reset adapter is detected. This is indicated by solid RED ON LED.  

4. Remove factory reset adapter within 15 seconds.  

5. Successful initiation of the factory reset is indicated by blinking RED ON LED.  

4.3. Earth connection  

For correct function, the earth connection at the grounding point needs to be properly  

connected to a solid ground. An M5 grounding screw at the housing is used for grounding.  

A short wire with a cross section of at least 4 mm2 shall be used. The grounding wire is  

set below the rip-lock washer. The nut is fixed for good reliable grounding contact. The  

tightening torque of the nut shall be 2.0 Nm.  

SIM  

DC  

X2  

X1  

PoE  

Ethernet  

Power  

Figure 7. Earth connection  

NOTICE  

Do not use equipment without protective earth connection.  

4.4. Connection of Cables  

Recommended tightening torque for the M12 connectors is 0.6 Nm. All M12 connections  

are screw connections.  

When connecting the power cable, ensure that the pins are connected correctly before  

tightening the power cable to the unit.  

NOTE  

This product has no replaceable fuse and should be connected via an  

external fuse for protection.  

Ibex-RT-630-5G Series  

21  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Ibex-RT-630-5G Series EN 50155 5G and WLAN Router User Manual
Make	IBEX
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• IBEX

Questions and Answers (0)

If you have any questions regarding Ibex-RT-630-5G Series EN 50155 5G and WLAN Router User Manual, please ask here and describe the problem in detail.