Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

2

Before you begin the installaꢀon, review General Safety Guidelines and Warnings.  

What’s in the Crate?  

Along with your PTX10004, you’ll also find:  

• A rack mount kit with:  

• Twelve Phillips 8-32 x .375 in. flat-head screws  

• Two rear rails  

• A mounꢀng tray  

• A rear safety restraint  

• The front door kit  

• An accessory kit with:  

• RJ-45 Ethernet cable  

• RJ-45 to DB9 rollover cable  

• Electrostaꢀc discharge (ESD) wrist strap with cable  

• Media kit (flash drives, PCMCIA card adapter)  

• Ground chassis lug, 2-hole, 10-32, 4 AWG  

• Power cord retainer clips, two for each power supply  

What Else Do I Need?  

• A mechanical liſt rated for 250 lb (113.4 kg). You can mount a PTX10004 manually or by using a  

mechanical liſt. Because of the router's size and weight, we strongly recommend that you use a  

mechanical liſt to mount the PTX10004. In this guide, we show you how to mount the router using a  

mechanical liſt.  

• 4 AWG (21.1 mm²) stranded wire grounding cable rated 75° C or per local electrical code  

• A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack mount screws  

• A number 3 Pozidriv or Phillips (+) screwdriver for the grounding screws  

• Twenty eight rack mount screws appropriate for your rack to secure the mounꢀng blades, mounꢀng  

tray, chassis, and safety restraint to the rack  

Assemble the Rack Mount Kit  

3

1. Aꢂach the mounꢀng blades to the front rack posts using six rack mount screws.  

2. From the rear of the rack, slide the mounꢀng tray into the rear posts of the rack such that the  

mounꢀng blades align below the flanges on either sides of the mounꢀng tray.  

3. Aꢂach the tray to the rear rack posts using eight rack mount screws.  

4. Aꢂach the tray to the mounꢀng blades in the rack using the 12 flat-head screws.  

Mount the PTX10004 on a the Rack and Ground the Chassis  

1. Wrap and fasten one end of the electrostaꢀc discharge (ESD) grounding strap around your bare  

wrist, and connect the other end to a site ESD point.  

2. Load the router onto the liſt, making sure it rests securely on the liſt plaꢃorm.  

3. Align the router in front of the rack, centering it in front of the mounꢀng tray.  

4. Liſt the chassis approximately 0.75 in. (1.9 cm) above the surface of the mounꢀng tray. Align the  

chassis as close as possible to the mounꢀng tray.  

5. Carefully slide the chassis onto the shelf unꢀl the chassis flanges contact the rack rails.  

6. Starꢀng at the boꢂom, aꢂach the chassis to the rack by inserꢀng eight rack mount screws through  

each open flange hole and rack hole.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide
Make	JUNIPER NETWORKS
Language	English
Filetype	PDF (Download)
File size	0.16 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• JUNIPER NETWORKS

Questions and Answers (0)

If you have any questions regarding Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide, please ask here and describe the problem in detail.