Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

5

Power On  

Now that you’ve installed your PTX10004 in the rack and grounded the chassis, you’re ready to connect  

it to power.  

The PTX10004 supports AC, DC, high-voltage alternaꢀng current (HVAC), and high-voltage direct  

current (HVDC). In this guide, we show you how to connect AC power. See the PTX10004 hardware  

guide for informaꢀon on other power opꢀons.  

1. Wrap and fasten one end of the electrostaꢀc discharge (ESD) grounding strap around your bare wrist,  

and connect the other end to a site ESD point.  

2. If the AC power source outlet has a power switch, turn it off.  

NOTE: If you need power source redundancy, you can aꢂach each power cable to separate  

power sources.  

3. Turn off the power switch on the power supply.  

4. Aꢂach each power supply to a dedicated power source.  

5. Set the three DIP switches on the power supply to indicate whether one or both power feeds are  

used, and to indicate the amperage of the feeds. Together, these switches determine if the chassis  

operates at 3,000 W, 5,000 W, or 5,500 W.  

If you're using both power feeds, set switch 1 and switch 2 to the on (|) posiꢀon. Power is shared. If  

you’re not using power source redundancy, set the unused source to the off (O) posiꢀon. The LED  

turns red and indicates an error if a power source input is not in use and the DIP switch is on (|).  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide
Make	JUNIPER NETWORKS
Language	English
Filetype	PDF (Download)
File size	0.16 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• JUNIPER NETWORKS

Questions and Answers (0)

If you have any questions regarding Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide, please ask here and describe the problem in detail.