LANCOM 884 VoIP Router User Guide
Hardware
LANCOM 884 VoIP
Power supply
12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection
Gigabit Ethernet 10/100/1000
TE / NT
TE / NT
NT
NT
Power consumption Max. ca. 14 W
Environment
Housing
Temperature range 0–40 °C; humidity 0–95 %; non-condensing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;
measures 210 × 45 × 140 mm (W × H × D)
Reset
Number of fans
Interfaces
None; fanless design, no rotating parts, high MTBF
h
d
f g
a b c
e
VDSL
ISDN 1
ISDN 2
ISDN 3
ISDN 4
WAN: VDSL2
a VDSL2 as per ITU G.993.2; profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a
a Compatible to VDSL2 from Deutsche Telekom
a Power
d ISDN
a ADSL conformity according to: ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO,
ADSL2 over ISDN as per ITU G.992.3 Annex B, ADSL over ISDN as per ITU G.992.1 Annex B.
a Supports one virtual connection at a time in ATM (VPI-VCI pair)
e
b
d
a
c
f
Off
Device switched off
Off
Interface deactivated
D-channel active
ISDN connected
Green, permanently* Device operational,
Green, permanently
Green, blinking
Red, flickering
ETH
USB
4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.
Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically
disabled in the LCOS configuration.
resp. device paired / claimed and LANCOM
Management Cloud (LMC) accessible
ISDN transfer error
Green / red, blinking
No password set. Without a password
the configuration data in the device is
unprotected.
Red / orange, blinking ISDN hardware error
USB 2.0 hi-speed host port for connecting USB printers (USB print server),
serial devices (COM-port server) or USB drives (FAT file system).
VDSL interface
ISDN interfaces
ISDN 1 + 2
Internal (NT) or external (TE) ISDN-S0 bus. This feature is
controlled by LCOS.
Red, permanently
Orange, blinking
ISDN connection not enabled
ISDN connecting
a
d
Use the supplied DSL cable for the IP-based line to connect the
VDSL interface and the provider’s telephone socket. For more
information, please contact your Internet service provider.
ISDN 1 / ISDN 2
ISDN 3 / ISDN 4
ISDN 1+2: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS.
ISDN 3+4: Internal (NT) ISDN bus.
Red, blinking
Charge or time limit reached
1x green inverse
blinking*
Connection to the LMC active, pairing OK,
claiming error
e ETH
Config (Com) / V.24
Serial configuration interface / COM-port (8-pin mini-DIN): 9,600–115,200 baud, suitable
for optional connection of analog / GPRS modems. Supports internal COM-port server and
provides transparent asynchronous serial-data transfer via TCP.
Off
No networking device attached
2x green inverse
blinking*
Pairing error, resp.
LMC activation code / PSK not available
ISDN 3 + 4
Internal (NT) ISDN-S0 bus.
Green, permanently
Connection to network device operational,
no data traffic
Ethernet interfaces
Connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN
switch.
WAN protocols
b
c
3x green inverse
blinking*
LMC not accessible, resp.
communication error
Green, flickering
Data transmission
VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without
DHCP), RIP-1, RIP-2, VLAN
A 100-Ohm resistor for line termination is switchable in LCOS.
b Online
f VoIP
ISDN
DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110 / GSM / HSCSD
LANCOM 884 VoIP
Quick Reference Guide
Off
WAN connection inactive
Serial interface
Configuring the device via the serial interface requires a serial
configuration cable (available as an accessory).
USB interface
You can use the USB interface to connect a USB printer or a
USB drive.
Off
No SIP accounts defined or VCM is off
e
f
Declaration of Conformity
Green, blinking
WAN connection is established
(e.g. PPP negotiation)
Green, permanently
All defined and active SIP accounts (outgo-
ing) were successfully registered
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in
compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006.
The full text of the EU Declaration of Conformity is available at the following Internet address:
Green, permanently
Red, permanently
WAN connection active
WAN connection error
Red, permanently
Not all of the defined and active SIP
accounts were registered (possibly still in
process)
Power
After connecting the cable to the device, turn the connector
90° clockwise to prevent it from accidental unplugging.
Use only the supplied power adapter.
Package content
c DSL
Red or green,
inverse flashing
Number of currently used lines (connecting
or connected)
Manual
Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
1 DSL cable for the IP-based line, 4.25m
Off
Interface deactivated
DSL connection active
DSL data transfer
Cable
Green, permanently
Green, flickering
Red, flickering
g VPN
Power adapter
External power supply adapter (230V), 12 V / 1.5 A DC/S;
To prevent the device from overvoltage
damage, an overvoltage-protected power supply is strongly
recommended.
barrel connector 2.1 / 5.5 mm bayonet; LANCOM item no. 111301
Off
VPN connection inactive
VPN connection active
VPN connecting
DSL transfer error
Green, permanently
Green, blinking
Red / orange, blinking DSL hardware error
Orange, blinking DSL training
Orange, permanently DSL sync
h Reset
Green, blinking
DSL connecting
Reset button
Operated e.g. with a paper clip
a short press: restart the device
a long press: reset the device
Please observe the following when setting up the device
Cloud-ready
A Do not rest any objects on top of the device
A For devices to be operated on the desktop, please attach the
adhesive rubber footpads
LANCOM 1681V
A Keep the ventilation slots on the side of the device clear
of obstruction
A Rack installation with the optional LANCOM Rack Mount
(separately available)
A In case of wall mounting, use the drilling template as supplied
This product contains separate open-source software components which are subject to their own licenses, in particular
the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s
WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the
corresponding software components will be made available on a download server upon request.
*) The additional power LED statuses are displayed in 5-seconds
rotation if the device is configured to be managed by the LANCOM
Management Cloud.
4
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
| General | Details |
|---|---|
| Name | LANCOM 884 VoIP Router User Guide |
| Make | LANCOM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.13 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding LANCOM 884 VoIP Router User Guide, please ask here and describe the problem in detail.
LANCOM 883+ VoIP Single Site Router Installation Guide
LANCOM VPN 1793VAW Router Installation Guide
LANCOM 1781-4G VPN Router User Guide
LANCOM 1793VA VPN Router User Guide
LANCOM 1790VA-4G Router User Guide
LANCOM 1793VAW VPN Router User Guide
Cudy WR3600E Gigabit Wi-Fi 7 Router Installation Guide
Juniper NETWORKS SSR120 Smart Router User Guide
MikroTik G8-b Wireless Router User Guide
H3C Magic NX30 WLAN Wireless Router User Guide
Taiko Audio V16.x22069 Extreme Router User Manual
ZTE U30 Air 5g Portable WiFi Mobile WiFi Router User Guide
TANGERINE DSL-AC68U Modem Router User Manual
TP-Link Deco X50-PoE Router User Guide
TechPowerUp Openwrt ONE Wi-Fi 6 Router User Manual
aparian A-DH485R/B Router User Guide