LB-LINK BL-AC3600 LTE Router Installation Guide
* This picture is for reference only, the specific inteꢂaces
and buttons are subject to the actual object
Installation Guide
Step 1
Hardware Connections
Led lights function description
System light (single light and two-colors)
Version：V1.0
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any inte rference
received, including interference that may cause undesired operation.
Optical modem
or ADSL Modem
Provided by the operator
Panel light status (multiple lights)
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Red light steady on
Red light off
Powered on
Power light
Steady on: powered on
Wall Inteꢀace
WAN Poꢁ
WPS button
System is staꢀing
Without network
Network connected
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interferenceto radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
(bulgy button)
Light off: the system is staꢀing
Red light flashes
Network
inteꢀace 1
WiFi light
Light flashing: data transmission is available (it is always
on when there is no data)
Blue or green light is steady on
LAN2 LAN1
WAN
-Reorient or relocate the receiving antenna.
WAN
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Power connection
Light on: Network cable is connectedLight off: Network
cable is not connected
Reset
OR
WAN/LAN light
Press and hold for 10-15 seconds
Radiation Exposure Statement
Light flashing: data transmission is available
to restore factoꢁ settings
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body.
(Independent button: small hole)
Network Led light
Light steady on or flashes
Light off
Network cable connected
Note: 5G WiFi is steady on for some models
Network cable not connected
Connect the phone (or computer) to the router's "wireless-XXXX" and then set it up as following steps:
(XXXX represents the last 4 digits of the MAC address, or see the sticker on the back of the router to obtain the wireless network name)
Step 2
Internet settings
Two access methods commonly
used in home network:
Quick Setup
Interfaces/buttons description
Quick Setup
Quick Setup
After testing, the recommended connection method is:
DHCP
192.168.16.1
You have successfully connected to the internet
Interface
2.4G WiFi
Previous
Next Step
POWER
Power poꢀ
Congratulations, you are online!
WiFi Name
wireless-325C
WAN (Network input poꢀ)
LAN (Network output poꢀ)
Can be connected to optical modem or community broadband connection
Can be connected to computers, set-top boxes and other wired devices
If "dynamic acquisition" is detected
automatically, click "Next Step" directly
Please wait 34 seconds reconnect wireless later
or
WiFi Password
2.4G
Please enter the login password
Quick Setup
5.8G WiFi
WiFi Name
Wi-Fi Name：wireless-325C
Double reset button
WPS (key)
After testing, the recommended connection method is:
Your current WAN poꢀ is plugged into a network cable
Login
Wi-Fi Password：12345678
wireless-325C-5G
Next Step
Press for 2-3 seconds to trigger WPS
Forgot password?
5.8G
RESET (small hole)
Press and hold for 10-15 seconds to restore factoꢁ settings
Please enter the broadband account
Account
WiFi Password
Wi-Fi Name：wireless-325C-5G
Please enter the broadband password
More Settings
Password
Wi-Fi Password：12345678
Previous
Single reset button
WPS/RST button
Shoꢀ press 1 to 2 seconds for WPS connection, long press 10 to 15 to restore factoꢁ Settings
Set the wireless name and password,
and then click "Next Step"
After the countdown, reconnect the
wireless (when connecting, enter Wi Fi
password shown on this page)
Open the browser and enter 192.168.16.1
See the sticker on the back of the router for
the login password
Next Step
Previous
Note: "WPS/RST" are small holes for some models
If "Broadband dialing" is detected automatically,
please enter the operator provided broadband
account and password, then click "Next Step"
尺寸：160*125mm，公差：±3mm
材质：80g书写纸+正反面单色印刷
备注：不需要折叠
料号：
Designed by
描述：
日期：2022.11.11
| General | Details |
|---|---|
| Name | LB-LINK BL-AC3600 LTE Router Installation Guide |
| Make | LB-LINK |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.08 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding LB-LINK BL-AC3600 LTE Router Installation Guide, please ask here and describe the problem in detail.
perle IRG5541+ FirstNet LTE Router User Guide
Xiaomi CB0401V2 5G CPE Pro V2 Wi-Fi 6 Router User Manual
Juniper NETWORKS PTX10003 Fixed Packet Transport Router User Guide
ASUS TUF-AX6000 Dual Band WiFi Router User Guide
JuniPer Cloud-Ready SSR1500 Session Router User Guide
NETGEAR RS600 Tri Band WiFi 7 Router User Guide
Red Fox 2 CNC Router Installation Guide
ASUS ZenWiFi BT10 BE18000 Tri Band WiFi Router User Guide
TP-Link TD-W8951ND Wireless DSL Modem Router Installation Guide
Tenda N301 Wi-Fi 4 Router Installation Guide