LINKSYS E1000 Wireless N Router Instruction Manual
Linksys_E1000
WARNING: This is only for version 1 hardware. For version 2: Linksys_E1000_v2.0
Contents
• 1 Hardware Specs
• 2 Install Procedure
• 3 Performing a
Hard Reset
• 4 Serial Recovery
• 5 JTAG
Hardware Specs
• FCC ID: Q87-E1000
• Industry Canada ID: 3839A-E1000
• CPU: Broadcom BCM4716B0 @300 MHz
• Flash / RAM: 4 MiB / 32 MiB
• Wireless/Ethernet chip: Broadcom BCM4716B0
• Wireless protocols: bgn
• Wireless MIMO config: 2x2:2
• Switch: Broadcom BCM5325E
• LAN / WAN: 4 / 1 (up to 100 Mb/s)
E1000v1 thread for information and DD-WRT compatibility: Linksys E1000 now supported (V.1 ONLY!)
Install Procedure
1. Read the Firmware FAQ and Peacock Announcement.
2. Download a trailed mini build (mini_e1000v1.bin) from the broadcom_K26 folder.
♦ Do not use a build bigger than 3712 KB (3801088 bytes)
♦ If you wish to experiment with a newer build, read it's build thread before flashing!
3. Set a static IP on your computer e.g. 192.168.1.7 and subnet mask 255.255.255.0
4. Connect an Ethernet cable from your computer to a router LAN port and disable wireless
♦ Recommended to disconnect other cables.
5. Perform a hard reset.
7. Go to the Linksys Administration->Firmware Upgrade page. Do not give the reboot command. You
will use this page to upgrade your firmware.
8. Browse to the downloaded firmware and click Upload.
9. Do not touch anything. The page will tell you that the upgrade was successful and the router is now
rebooting. Your router may take upwards of a couple minutes to reboot. Watch the lights... once the
wireless and power indicators are on steadily for several seconds, your router is fully rebooted and
you can click "Continue" in your browser window.
10. If the DD-WRT password change page displays, your upgrade has been successful, and you must now
wait for the router to come online again so you can configure it.
11. For upgrades use any non-trailed and non-nv6xk builds (e.g. K2.6_mini.bin) no bigger than 3712 KB
(3801088 bytes)
Contents
1
| General | Details |
|---|---|
| Name | LINKSYS E1000 Wireless N Router Instruction Manual |
| Make | Linksys |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.05 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding LINKSYS E1000 Wireless N Router Instruction Manual, please ask here and describe the problem in detail.
LINKSYS EA7500 AC1900 Max Stream Wifi Router User Guide
Linksys WRT300N Wireless-N Broadband Router User Guide
LINKSYS MX4200 Router Installation Guide
LINKSYS N600 Dual Band Router User Guide
LINKSYS WRT54G Wireless G Router Instructions
LINKSYS E2500 Dual Band Router User Guide
LINKSYS AX3200 Dual-Band Gigabit Wi-Fi 6 Router User Guide
LINKSYS FGW5500 5G WiFi 6 Router User Guide
LINKSYS AX1800 Dual-Band WiFi 6 Router E7350 User Guide
LINKSYS 750MR7500 Hydra Pro 6E Mesh Router User Guide
Ruijie Reyee RG-EW3200GX Pro Wi-Fi 6 Dual-band Gigabit Mesh Router User Guide
TP-Link T120100-2B1 Gigabit VPN Router Instructions
Трохи зачекайте…
LINOVISION IOT-R32W Rugged and Versatile Cellular Router Instructions
ADVANTECH ICR-2431 LTE Router User Manual
Tenda RX12V1.0 Wi-Fi 6 6E Router Installation Guide
KuWFi CF5 4G LTE CPE Router User Manual
Juniper NETWORKS ACX710 Universal Metro Router User Guide
NETGEAR RBR20 Orbi Mesh WiFi Router User Guide
TP-Link Omada Pro Gigabit VPN Router Owner’s Manual