Mercury Asus RT-AC66-88U Fiber Dual-Band Wireless AC1750 Gigabit Router User Guide

1

2

Asus RT-AC66/88U Fibre Configuration  

Using your own router? No worries, we’ve got you covered!  

Ensure the Router is connected from WAN on Router to GE1 on ONT.  

Log into the gateway:  

1. Ensure your device is connected to the Router (preferably via cable)  

2. Open a web browser  

3. Type the following in the address bar at the top: 192.168.1.1  

4. Default Username: admin  

5. Default Password: admin  

This should then give access to the router’s user interface.  

(If the password is incorrect you will need to Factory Reset the router by pushing the Inset Reset button on the back for  

10 seconds)  

How to add correct settings for the Mercury network:  

From the menu on the left select: WAN (Under Advanced Settings)  

Change the following settings:  

1. WAN Connection Type: PPPoE  

2. Enable WAN: Yes  

3. Enable NAT: Yes  

4. Enable UPnP: Yes  

5. Get The WAN IP Automatially: Yes  

6. Connect to DNS Server Automatically: Yes  

7. User Name: (your mercury acct number)@mercurybroadband.co.nz  

8. Password: password  

9. MTU: 1492  

10. MRU: 1492  

11. All else can be left unchanged  

12. Select: Apply  

Under the menu on the left again, click LAN (Under Advanced Settings)  

Change the following settings:  

1. Select ISP profile: Manual Setting  

2. Internet: VID - 10, PRIO – 0  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Mercury Asus RT-AC66-88U Fiber Dual-Band Wireless AC1750 Gigabit Router User Guide
Make	Mercury
Language	English
Filetype	PDF (Download)
File size	0.06 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Mercury

Questions and Answers (0)

If you have any questions regarding Mercury Asus RT-AC66-88U Fiber Dual-Band Wireless AC1750 Gigabit Router User Guide, please ask here and describe the problem in detail.