MICRONET AX1800 Dual Band Wi-Fi 6 Router User Guide
6. Mesh pairing
If you have purchased two or more AX1800 units, follow the steps below to perform the MESH pairing between the routers and
enjoy a connection with a wide signal range.
6.1 Mesh pairing One button
6.1.1. Before turning on the second (Agent) router, make sure that the first (Controller) router connected has internet access and
is fully configured;
6.1.2. Plug in the second (Agent) router;
6.1.3. Click and hold the first (controller) router's WPS button for about 8 seconds, then the LED will start flashing;
6.1.4. Then, repeat the process on the second (Agent) router, click and hold the WPS button for about 8 seconds and release,
then the LED will start flashing too;
6.1.5. Wait for approximately 3 minutes while the routers are paired, once the process is completed, the LED of both routers
should be green;
6.1.6. Once connected, move the second (Agent) router to the place where the signal needs to be expanded (just unplug it and
plug it in again in the place you prefer), wait approximately 3 minutes until the connection is re-established and check if the LED
lights up, keeps with the green light on and the signal stable.
Note: To connect more AX1800 units to the network, just repeat the step by step above.
| General | Details |
|---|---|
| Name | MICRONET AX1800 Dual Band Wi-Fi 6 Router User Guide |
| Make | Micronet |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.1 MB |
If you have any questions regarding MICRONET AX1800 Dual Band Wi-Fi 6 Router User Guide, please ask here and describe the problem in detail.

MICRONET N300 Wireless Router, N300 WiFi Router T1 Pro User Guide























