MICRONET AX1800 Dual Band Wi-Fi 6 Router User Guide
6.2 Mesh Unpairing
• You can unpair the meshed router by restore the router to its factory default settings.
• For resetting router, press and hold the RESET button more than 8 seconds then release , the LED will start to blink and change
into red.
6.3 Notice
• After completing EasyMesh networking, the Controller router will synchronize its 2.4GHz and 5GHz SSID, password, and
channel with the Agent router. That is, these configurations of the Agent router will be the same as the Controller router.
• After modifying the SSID, password, and channel on the Controller router, the Controller router will synchronize these
configurations to all Agent router. Modifying the SSID and password on the Agent router will not be synchronized.
• After the router restarts with a power failure, the routers will restore the EasyMesh network group by default, and no connection
settings are required.
• If the EasyMesh function of the Controller router is disabled, the entire EasyMesh network will be disabled.
• If the EasyMesh function of the Agent router is disabled, the router will leave the EasyMesh network.
• If you need to switch the access mode of a certain Mesh router, you need to turn off the Mesh function of the router first, and
then turn on the Mesh function to complete the switching of the access mode.
• The Agent router is not supported to connect to other Mesh routers via Wi-Fi and wired at the same time. That is, the Agent
router can only use one of Wi-Fi and wired to connect to other Mesh routers.
| General | Details |
|---|---|
| Name | MICRONET AX1800 Dual Band Wi-Fi 6 Router User Guide |
| Make | Micronet |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.1 MB |
If you have any questions regarding MICRONET AX1800 Dual Band Wi-Fi 6 Router User Guide, please ask here and describe the problem in detail.

MICRONET N300 Wireless Router, N300 WiFi Router T1 Pro User Guide























