NETGEAR R6300 WiFi Router Instruction Manual
Netgear_R6300
Flash ROM
RAM
128 MB
128 MB
Radios
BCM4360 5 GHz & BCM4331 2.4 GHz
WLAN Support a/n+ac 3x3:3 & b/g/n 3x3:3
WLAN Max Speed 450 Mbps on 2.4Ghz and 1300 Mbps on 5Ghz
Antenna Location Internal
Switch
USB
4x GigE LAN + 1 GigE WAN
2x USB 2.0
Power Adapter 12VDC 5A
Flashing Instructions
Read the Firmware FAQ (and Peacock Announcement for historical reference on Broadcom devices and
related procedures).
Initial DD-WRT Installation
NOTE: Read the entirety of this page before installation, especially the Build Info section. Builds marked as
"recommended" may be outdated, and newer builds can be used once their "New Build" thread is reviewed.
See Where do I download firmware? for links.
To go from stock Netgear firmware on the R6300 to DD-WRT:
1. Download trailed initial flash (.chk) R6300 firmware.
1.
◊ tested 2021 build 47911 can be directly flashed from last OEM (V1.0.2.80_1.0.59).
◊ Do not consider this a build recommendation!
2. Reset router:
1. Turn on router, wait for Power light to go solid green.
2. Press & hold Reset button for 20sec, or until Power light starts flashing.
3. Release Reset button, and router should reboot with much flashing of lights.
4. Wait for Power light to go solid green again.
3. Disconnect PC from any network (wired or wireless).
4. Connect PC Ethernet port to a router Ethernet port (not the yellow Internet port) with a cable, and
wait for PC to be configured by router DHCP (which can take up to a full minute).
5. Open Web browser and clear cache. (Initiate by holding down Shift and Ctrl while pressing Delete.)
7. At Configuring the Internet Connection select No, I want to configure the Internet connection myself.
♦ Proceed through the confirmation.
8. Click on Advanced > Administration > Router Update
9. Browse to the downloaded initial trailed (.chk) build, and proceed.
♦ Ignore any message that the update is older than the existing firmware, and proceed to
update.
10. After router says it is done, wait until it fully reboots and the power light is solid green again.
♦ This may take several additional minutes.
Flashing Instructions
2
| General | Details |
|---|---|
| Name | NETGEAR R6300 WiFi Router Instruction Manual |
| Make | NETGEAR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.05 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding NETGEAR R6300 WiFi Router Instruction Manual, please ask here and describe the problem in detail.
NETGEAR RAX40v2 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual
NETGEAR RAX10 AX1800 WiFi 6 Router User Guide
NETGEAR XR1000v2 Nighthawk WiFi 6 Pro Gaming Router User Guide
NETGEAR PR60X Pro 10G Multi Gigabit Dual WAN Pro Router Installation Guide
NETGEAR AX6 Stream Wi-Fi Router User Manual
NETGEAR AC2600 Wi-Fi Router User Guide
NETGEAR MR6110 M6 5G WiFi 6 Mobile Router User Manual
NETGEAR RBR20 Orbi Mesh WiFi Router User Guide
NETGEAR RS280S Nighthawk WiFi 7 Tri-Band Router Owner’s Manual
NETGEAR BE9200 WiFi 7 Router Instruction Manual
NETGEAR RS600 Nighthawk Tri Band WiFi 7 Router Instruction Manual
dahua AX1500 Wi-Fi6 Wireless Router Instruction Manual
eero Pro 6 Mesh Wi-Fi Router User Guide
mikrotik RB750UPr2 hEX PoE Lite is a Router User Guide
Draytek Vigor2767 Series Security Router User Guide
D-LINK DWM-311 LTE Portable Router User Manual
JENSEN Air:Link 3000DG Dual Band Router User Manual
ASUS BT8 ZenWiFi Tri Band WiFi Router User Guide
Banggood TC66 4G Wireless Router Instruction Manual
CASTLENET EBM522U Mesh WiFi Router Installation Guide