ozito PXBLTS Trim Router Instruction Manual
KNOW YOUR PRODUCT
SETUP & PREPARATION
BRUSHLESS TRIM ROUTER
1. ASSEMBLY
1. Lock Off Switch
2. On/Off Switch
9. Spindle
10. Spindle Nut
3. Sure Grip Handle
4. Battery Seating
5. Speed Control Dial
6. Trim Router Base
7. Depth Fastening Screw
8. Cut Depth Scale
11. Spindle Lock
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
12. Dust Extraction port
13. Height Adjustor
14. Guide Mount Screw
15. Baseplate
WARNING! WEAR GLOVES WHEN HANDLING
ROUTER BITS AS THEY CAN BE SHARP AND/OR
HOT TO THE TOUCH AFTER USE.
16. Clear Safety Guard
1
2
WARNING! ONLY USE THE ROUTER UNIT WITH A
COMPATIBLE BASE. USING IT WITHOUT A BASE
OR WITH AN INCOMPATIBLE BASE MAY RESULT IN
SERIOUS INJURY.
Installing A Router Bit
When using the trim router, only use router bits that:
•
•
are suitable for cutting wood or plastic,
has a suitable shank diameter for the collet mounted (collet size:
6.35mm & 8mm),
•
•
has a maximum diameter of 28mm,
are suitable for the router’s speed (n0 = 10,000-30,000/min).
3
4
5
1. Remove the trim router base from the
router unit.
5
2. Place the smaller supplied spanner on
the spindle and use the large spanner to
loosen the collet nut.
6
7
8
9
16
15
14
13
Note: If a different collet size is required,
remove the collet nut entirely and replace
the collet. Re-attach the collet nut but don’t
tighten it all the way.
20
10
1/2
0 in.
mm 0
3. Fully insert the shaft of the router bit (not
supplied) into the collet.
12
11 10
4. Press and hold down the spindle lock
while tightening the collet nut with your
fingers.
BATTERY & CHARGER
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this PXC Trim Router.
0 in.
mm 0
5. Release the spindle lock and then use the
2 spanners to fully tighten the collet nut.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
WARNING! THE SPINDLE LOCK IS NOT ALLOWED
TO BE USED FOR TIGHTENING WITH THE SPANNER.
TIGHTEN THE CLAMP NUT USING THE TWO
SPANNERS.
| General | Details |
|---|---|
| Name | ozito PXBLTS Trim Router Instruction Manual |
| Make | ozito |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ozito PXBLTS Trim Router Instruction Manual, please ask here and describe the problem in detail.
Ruijie RG-EG310GH-P-E 10 Port Gigabit Router User Manual
robustel R1510-4L VPN Router Owner’s Manual
Cudy WR3000E Gigabit Mesh Wi-Fi 6 Router Installation Guide
TP-Link ER706W-4G Omada 4G Cat6 Gigabit VPN Router Instructions
DrayTek Vigor3912 Series Security VPN Router User Guide
Cudy WR3000SE AX3000 Gigabit Mesh Wi-Fi 6 Router Owner’s Manual
TP-Link M7350 4G LTE Mobile Wi-Fi Router Installation Guide
TELTONIKA RUT360100100 DIN Rail Router User Guide
Banggood TC66 4G Wireless Router Instruction Manual
STARLINK 02633101 Gen 3 Wi-Fi Router User Guide