Home > ozito > ozito PXBLTS Trim Router Instruction Manual

ozito PXBLTS Trim Router Instruction Manual

2. EDGE TRIMMING  
Attaching The Trimmer Guide  
WARNING! NEVER USE THE TRIM ROUTER WITHOUT  
THE SAFETY GUARD FITTED.  
The trimmer guide allows you to  
trim off precise amounts of material  
from the edge of a workpiece.  
Attaching The Safety Guard  
1. Use a screwdriver (not supplied) to  
remove the screw on the trim router base.  
2. Slide the safety guard into position and  
replace the screw to lock it in place.  
1. Loosen the guide mount screw.  
2. Slide the trimmer guide arm  
between the washer and router  
base.  
Note: The height of the trimmer  
guide should be just below the  
router bit when it is completely  
lowered.  
Attaching & Removing The Trim Router Base  
1. Loosen the depth fastening screw.  
3. Tighten the guide mount screw to lock the  
guide in place.  
2. Slide the router into the  
router base.  
3. Tighten the depth fastening  
screw.  
Adjusting The Trimmer Guide  
1. Loosen the trimmer locking bolt.  
4. To remove the base, loosen the depth fastening screw and pull the base  
off the router.  
Fitting A Battery  
2. Adjust the trim depth by rotating  
the horizontal adjustment knob.  
Rotate the knob clockwise for a  
larger trim.  
1. Slide the battery into the tool base until it  
clicks into place.  
2. Hold down the battery release  
button and then slide the battery  
out.  
3. Tighten the trimmer locking bolt to set the  
distance in place.  
b.  
a.  
GeneralDetails
Nameozito PXBLTS Trim Router Instruction Manual
Makeozito
LanguageEnglish
FiletypePDF (Download)
File size1.38 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding ozito PXBLTS Trim Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × 1 =

ozito PXBLTS Trim Router Instruction Manual