ozito PXBLTS Trim Router Instruction Manual
7. USAGE
Switching The Tool On & Off
WARNING! ALWAYS WEAR HEARING, EYE AND
BREATHING PROTECTION DURING OPERATION.
The router has a safety lock off function that needs to be disengaged before
the tool can be started.
WARNING! HOLD THE TOOL WITH BOTH HANDS
DURING OPERATION AND KEEP FINGERS CLEAR
OF THE ROUTER BIT AT ALL TIMES. INJURY MAY
OCCUR IF YOU HOLD THE TRIMMER INCORRECTLY.
1. Press the lock off switch to disengage the
function. The LED worklight will switch
on.
a.
1. Perform the steps below before starting
b.
2. Press the on/off switch to start the tool.
•
•
Ensure that the correct router bit is installed.
Ensure that the trim router base and router bit is secure and
correctly installed.
Note: The lock off function will automatically re-activate after 10 seconds
to prevent accidental starting. The LED worklight will switch off when this
happens.
•
•
Check that the cut depth and speed are correctly set.
Check that any accessories being used are securely and correctly
attached.
3. Press the on/off switch again to stop the tool.
•
•
•
Connect a dust extraction unit, such as a vacuum cleaner, to the
dust extraction port to create a cleaner work environment.
WARNING! ALLOW THE ROUTER BIT TO COME
TO A STANDSTILL BEFORE REMOVING IT FROM
THE WORKPIECE AND/OR PLACING THE ROUTER
DOWN.
Clamp or secure the workpiece so that it does not move during
routing.
Check for and remove any metal parts (eg. nails, screws, staples
etc.) that may come into contact with the router bit.
4. Press the lock off switch to lock the tool.
2. Place the trimmer guide base
onto the workpiece so that the
router bit overhangs the edge.
WARNING! TO PREVENT ACCIDENTAL START, LOCK
THE TOOL BY PRESSING THE LOCK OFF SWITCH.
3. Press the lock-off button and
then the on/off switch to start
the tool.
a.
b.
4. Allow the router bit to reach full speed before moving it into the
workpiece.
5. Follow the guide below when cutting around your workpiece. This
Direction of the router travel
When routing the outside
of your workpiece
When routing the inside of
your workpiece
ensures that wood chips and debris are removed away from you as you
cut.
Note: For deeper cuts or harder timbers, making several shallow
progressive cuts will allow for better control over the tool and a neater
finish.
| General | Details |
|---|---|
| Name | ozito PXBLTS Trim Router Instruction Manual |
| Make | ozito |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ozito PXBLTS Trim Router Instruction Manual, please ask here and describe the problem in detail.
NETGEAR Nighthawk Tri-Band WiFi 6 Router RAX200 User Guide
TUGE TR10NA IOT 4G Router User Guide
MERCUSYS MB112-4G 300Mbps Wireless N 4G LTE Router User Guide
Mercury Netgear D7000 Fibre Modem Router User Guide
MIKROTIK 2004-1G-12S+2XS Cloud Core Router User Manual
TP-Link TL-MR3420 3G and 4G Wireless Router Installation Guide
robustel R2011 Cellular Router Instruction Manual
ZYXEL FWA505 5G AX1800 Router User Guide
BOSSPAC EA000405 Border Router Instruction Manual
TP-Link AXE7800 Tri-Band Wi-Fi 6E Router Installation Guide