SKYWORTH GN543V GPON ONT WiFi Router Installation Guide
Please pay attention to the following important safety instructions for ONT installation
and use.
Safety Instructions
Product Specifications
Install the ONT
Notes: Additional items such as optical fiber patch cord that are not included with the
ONT may be needed to complete your ONT installation.
1. This equipment is a Class III electrical appliance which is designed to be supplied
from a separated/safety extra-low voltage (SELV) power source. The voltage from a
SELV supply is low enough that under normal conditions a person can safely come
into contact with it without risk of electrical shock.
Item
Product Name
Specification
GPON ONT
Please stop using the device during a lightning storm. To avoid damage
by lightning strike, please cut off power and disconnect all the cables.
GPON Standard
ITU-T G.984, TR156/TR255
2.5Gbps/1.25Gbps
IEEE802.11b/g/n/ac
2. WARNING: To reduce the risk of fire or electric shock, do not expose this device to
rain or moisture. The device shall not be exposed to dripping or splashing and that
objects filled with liquids, such as vases, shall not be placed on apparatus.
Maximum PON speed
Wi-Fi Standard
Please keep device on a stable platform, and make device in well-
ventilated and sunlight-free environment.
2.4GHz: WiFi5 300Mbps(11n@40MHz)
5GHz: WiFi5 1732Mbps(11ac@80MHz)
AVERTISSEMENT : Pour réduire le risque d'incendie ou de choc électrique, ne pas
exposer cet appareil à la pluie ou à l'humidité. L'appareil ne doit pas être exposé à
des gouttes d'eau ou des éclaboussures, et des objets remplis de liquides, tels que
des vases, ne doivent pas être placés sur l'appareil.
Maximum Wi-Fi speed
During storage, transport and use of this device, please keep it dry
strictly, If any liquid accidently fall inside the device, please cut off
power supply immediately, and contact your local operator
Optical Interface
LAN Interface
1*SC/APC, 1310/1490WDM
4*Gigabit Ethernet Ports, RJ45
2*FXS Phone Ports, RJ11
3. WARNING: the power plug/direct plug-in adapter is used as disconnect device, the
disconnect device shall remain readily operable.
Phone Interface
Wi-Fi Antenna
Please use the original power adapter and other accessories. To avoid
electric shock, please keep the power plug dry and clean, and never use
damaged power cord.
Quick Installation Guide
AVERTISSEMENT : La fiche d'alimentation/l'adaptateur enfichable directement
utilisé comme dispositif de déconnexion doit rester facilement utilisable.
2.4G: 2*3dBi; 5G: 2*3dBi, Omni-directional
Environment
4.
Correct Disposal of this product. This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer or service operator where the
product was purchased. They can take this product for environmental safe recycling.
Rated Power Input
12VDC/1.5A
GPON ONT
GN543V
To avoid swallowing and other dangerous behavior, do not allow
unsupervised children to use or play with this device and accessories.
Operating Temperature
Storage Temperature
Operating Humidity
0 ~ 45 (32~113
)
-20 ~ 65 (-4~149
)
If any abnormal phenomena found, such as smoke, abnormal sound
or peculiar smell, please stop using it immediately and cut off power
immediately.
0 ~ 95% non-condensing
Installation Steps:
1. Connect the optical fiber patch cord to the Optical socket at the bottom of your ONT.
The connector of the fiber cord shall be SC/APC usually in green color.
5. For the terminals marked with symbol of
“
” may be of sufficient magnitude to
constitute a risk of electric shock. The external wiring connected to the terminals
requires installation by an instructed person or the used of ready-made leads or
cords.
Please keep at least 10cm space around this device for ventilation when
place it, and away from heat/fire source, such as heater or candle
Packaging Items
2. Connect the Ethernet cable to the LAN port on your computer and then to any of the
LAN ports at the rear of your ONT.
CAUTION !
6.
This lightning flash with arrowhead symbol within
3. Connect your telephone or fax machine to TEL port at the rear of ONT. The TEL port
shall be specified by your service provider.
RISK OF ELECTRIC SHOCK
GN543V
GPON ONT, with 4 Wi-Fi antennas
Do not place any objects on the device or power cord/plug, and never
cover ventilation holes with any objects
DO NOT OPEN
an equilateral triangle is intended to alert the user
to the presence of non-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
4. Connect power adapter to the DC Power jack on the rear of your ONT and then plug
the power adapter into an electrical wall outlet. Press the ON/OFF button on your
ONT, this will then power on the ONT. Check the LEDs on your ONT. Please Refer to
“Front Panel LEDs” section for more information.
Warning: to reduce the risk of electric shock, do not remove cover (or back) as there
are no user-serviceable parts inside. Refer servicing to qualified personnel.
Power
Output 12VDC/1.5A Switching Power Adapter
Stop using the device and cut off power supply before cleaning. Please
use a soft, dry cloth to clean outer case while it’s necessary.
Adapter
Avertissement: Pour réduire le risque de choc électrique, ne pas retirer le capot (ou
l'arrière) car il n'y a pas de pièces réparables par l'utilisateur à l'intérieur. Confier
l'entretien à un personnel qualifié.
Ethernet
Cable
Standard CAT5e Ethernet cable for connecting your
devices to the ONT
To reduce the risk of electric shock, do not open the outer case of the
device. Please refer servicing to qualified personnel only.
7. Use only the AC adapter which is included in the product package. Any other
adapter may cause damage to the device. Such damage is not covered under
warranty.
Quick
This QIG provides basic product specification and
information for installing the device and get it up
and running on your home network
Installation
Guide
The outer case will have a certain degree of heat after long-running, don’t worry, this
device can still work normally.
FCC Statement
PON LED Status Instruction
Front Panel LEDs
Login Web Manager and Setup the ONT
Troubleshooting
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
PON
Off
LOS
Off
Description
How to login the ONT Web Manager
Open the web browser and input the IP as well the username and password:
Default login IP: 192.168.1.1
Trouble
Troubleshooting
The ONT is disabled by the OLT
The ONT is registering to the OLT
The ONT has already registered to OLT
The fiber is not connected properly
Make sure the power adapter is plugged in the electrical wall outlet
Check the power adapter is also plugged in the DC jack at the rear of
the ONT
Flash
On
Off
ONT not
work
Username: admin
Off
Password: <please check the label on your ONT>
Make sure the power On/Off button on the rear panel is set to ON status
If the ONT can’t power on or often restart, please contact your ISP
Off
Flash
LED
Color
Status
On
Description
How to setup Wi-Fi Network Name (SSID) and Password
Step1: Login Web Manager first
Power On
Power Off
Plug out the Ethernet cable then plug in the Ethernet cable, wait one
minute, check the problem again
Power
Green
Off
Step2: Click "Network”, then select “WLAN 2.4G" or “WLAN 5G”
Step3: Input your new SSID name in "SSID"
Can not
Access
Internet
Rear and Front Panel
Power Off the ONT, then power On, wait five minutes, check the problem
again
-Reorient or relocate the receiving antenna.
PON
LOS
Green
Red
Refer to table below: “PON LED Status Instruction”
Refer to table below: “PON LED Status Instruction”
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Step4: Input your new password in "WPA Pre-Shared Key"
Step5: Click the "Confirm" button to submit your change and the change will be taken
effect immediately
Check LED status, if LOS LED is flashing, or PON and Internet LED are Off,
please check your optical fiber connection, or contact your ISP for help
On
Flash
Off
Got WAN IP Address Successfully
Data Under Transmitting
Device in bridged mode or no IP
LAN device Connected
Data Under Transmitting
No Connection
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Check whether the WAN and 2.4G/5G Wi-Fi indicators on the ONT front
panel are all ON or flashing
WAN
LAN1~4
2.4G
Green
Green
Green
Green
Green
Green
Can not
access
How to change Web Login Password
Make sure your wireless device has connected the correct Wi-Fi SSID
Modify the encryption type of Wi-Fi, check the problem again
Modify the Wi-Fi SSID name and password, check the problem again
Power Off the ONT then power On, wait five minutes, check the problem again
If all the above operations can’t solve the problem, please contact your ISP
Step1: Login Web Manager first
Responsible for compliance could void the user’s authority to operate this equipment.
(Example- use only shielded interface cables when connecting to computer or
peripheral devices).
On
Internet
via Wi-Fi
Step2: Click "Management" on main menu
Step3: Click "User Management" on submenu
Step4: Enter your new password
Flash
Off
Step5: Click on "Confirm" button to submit your change
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
On
2.4G Wi-Fi Enabled
Data Under Transmitting
Disable
Caution--use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Flash
Off
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
How to restore the ONT Configurations to Factory Default
You have two options to reset the device's configuration to its factory default settings.
Attention – L'utilisation des commandes ou réglages ou l'exécution des procédures
autres que celles spécifiées dans les présentes exigences peuvent être la cause d'une
exposition à un rayonnement dangereux
On
5G Wi-Fi Enabled
Option 1:
Step1: Login Web Manager first
No.
Name
Description
5G
Flash
Off
Data Under Transmitting
Disable
FCC Radiation Exposure Statement:
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1
Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019
Step2: Click "Management" on main menu, then select "Restore Default” on the
Reset button. Press and hold for 5 seconds to Reset
configuration to the factory default settings.
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled
enviroment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
1.
RESET
submenu
On
Pairing ok
Class 1 laser product.The product fulfils the requirements of IEC 60825-1:2014.
Step3: Click on “Restore Default” button, this will then reset the device’s
2.
3.
4.
5.
TEL 1/2
Two RJ11 Telephone Port
configurations to its factory default settings.
WPS
Flash
Off
In pairing
LAN 1/2/3/4 Four RJ45 Gigabit Ethernet Port
Option2:
Not activated/not triggered
Phone registration succeeded
Phone is registering or on call
Voice port disabled
ON/OFF
12V/1.5A
Power On/Off Button
Press and hold the ‘RESET’ button at rear panel of your GN630V for more than 5
seconds using the end of a paper clip or other small object with a narrow tip such as a
pencil, and then release.
On
DC12V Power Input Jack
TEL 1~2
Flash
Off
Press and hold for 5 seconds to activate WPS pairing for
both 2.4G and 5G.
6.
7.
WPS
SC/APC socket for optical fiber patch cord.
Note: the optical interface is located at the bottom of the ONT.
Optical
Shenzhen Skyworth Digital Technology Co., LTD.
14/F, Unit A, Skyworth Building, Gaoxin Ave.1.S., Nanshan District, Shenzhen, China
风琴折（奇数页）
料号(Part No.):
待定
1 2 3 4 5
展开尺寸(Unfolding Size):
成品尺寸(Folded Size):
印刷颜色(Print Color):
材质(Material):
475x145 mm
95x145 mm
黑色(Black)
技术要求(NOTES):
80g书纸(80g Writing paper)
封面Front
1: 公差(Tolerance): ±2mm
2: 原材料及后处理工艺均能满足ROHS和WEEE的要求.
(Raw materials and the corresponding post processing
should meet requirements defined in the ROHS and WEEE.)
厂家/Manufacturer: Voion/Fuweizhi/Jiahui
设计/Designer: 罗运鸿
日期/Date: 2023.09.12
认证加签/Certification Audit:
审核/Audit:
封底Back
| General | Details |
|---|---|
| Name | SKYWORTH GN543V GPON ONT WiFi Router Installation Guide |
| Make | SKYWORTH |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding SKYWORTH GN543V GPON ONT WiFi Router Installation Guide, please ask here and describe the problem in detail.
SKYWORTH GN630V GPON ONT WiFi Router Installation Guide
SKYWORTH R6215 Wi-Fi 6 Mesh Router Installation Guide
SKYWORTH GN630 GPON ONT Wi-Fi Router Installation Guide
LANCOM SYSTEMS 1800EFW-5G Router Installation Guide
TP-Link AC750 Dual Band Wi-Fi Travel Router Instructions
LINOVISION IOT-R41 Mini 4G LTE Router User Manual
ASUS DSL-N12U 11N 300MBps Wireless ADSL Modem Router User Guide
levelone WGR-8031 AC1200 Dual Band Wireless Gigabit Router Owner’s Manual
ERICSSON R980-5GD Mobile Router User Manual
TP-Link Archer MR500 Wireless Dual Band Gigabit Router User Guide
HIKVISION DS-3WG105GP-SI Router User Guide
Juniper NETWORKS ACX710 Universal Metro Router User Guide
HUAWEI 5G CPE Pro 2 WiFi 6 Router User Guide