TP-Link Archer AX10 Dual Band Wi-Fi 6 Router Installation Guide

1

2

B

u

t

t

o

n

E

x

p

l

a

n

a

t

i

o

n

N

e

e

d

H

e

l

p

?

WPS/Wi-Fi Button  

Q1. What should I do if I can’t access the web  

management page?  

Press the button for 1 second, and immediately press the WPS  

button on your client to start the WPS process.  

Press and hold the button for more than 2 seconds, then  

release the button to turn on or off the wireless function of your  

router.  

•

•

Reboot your router and try again.  

Quick Installation Guide  

If the computer is set to a static IP, change its settings to  

obtain an IP address automatically.  

•

Verify that http://tplinkwifi.net is correctly entered in the web  

browser. Alternatively, enter http://192.168.0.1 or  

http://192.168.1.1 in the web browser.  

Reset Button  

Press and hold the button for about 6 seconds until the Power  

LED blinks to reset the router to its factory default settings.  

•

•

Use another web browser and try again.  

Disable and enable the network adapter in use.  

Q2. What should I do if I can’t access the internet?  

•

•

•

Power off your modem for about 5 minutes, then power it on  

and check the internet. If your modem has more than one  

Ethernet port, keep other ports unconnected.  

Check if the internet is working normally by connecting a  

computer directly to the modem via an Ethernet cable. If it is  

not, contact your internet service provider.  

Log in to the web management page, and go to the Network  

Map page to check whether the internet IP address is valid  

or not. If it’s valid, go to Advanced > Network > Internet,  

click Advanced Settings, select Use the Following DNS  

Addresses, set the primary DNS to 8.8.8.8, and set the  

secondary DNS to 8.8.4.4. If it is not, check the hardware  

connection or contact your internet service provider.  

For cable modem users, log in to the web management  

page of the router and go to Advanced > Network > Internet  

> MAC Clone. Select Clone Current Device MAC and click  

SAVE. Then reboot both the modem and the router.  

TP-Link Cloud Service  

TP-Link Cloud service provides a better way to manage your  

cloud devices. You can set up and enjoy cloud functions via  

the Tether app or through the web management page at  

http://tplinkwifi.net.  

Remote Management  

Easily manage your home network when you are out  

and about via the Tether app on your smartphone or  

tablet.  

Timely Upgrade Notifications  

Keep you informed of the latest firmware updates,  

ensuring that your router stays at its best.  

•

One for All  

Manage multiple TP-Link Cloud devices, all from a  

Q3. What should I do if I forget my wireless password?  

single TP-Link ID.  

•

If you have not changed the default wireless password, it can  

be found on the label at the bottom of the router.  

Connect a computer directly to the router using an Ethernet  

cable. Log in to the router’s web management page at  

http://tplinkwifi.net, and go to the Wireless page to retrieve  

or reset your wireless password.  

To communicate with TP-Link users or engineers, visit  

https://community.tp-link.com to join TP-Link Community.  

•

For technical support, replacement services, user guides  

and more, please visit https://www.tp-link.com/support  

Q4. What should I do if I forget my web management  

page password?  

Email techwriter@tp-link.com.cn to give suggestions.  

Dual-Band Wi-Fi 6 Router  

· Keep the device away from water, fire, humidity or hot environments.  

· Do not attempt to disassemble, repair, or modify the device. If you need  

service, please contact us.  

· Do not use any other chargers than those recommended.  

· Do not use damaged charger or USB cable to charge the device.  

· Do not use the device where wireless devices are not allowed.  

· Adapter shall be installed near the equipment and shall be easily accessible.  

•

If you are using a TP-Link ID to log in, click Forgot  

Password? on the login page and then follow the  

instructions to reset it.  

•

Alternatively, press and hold the Reset button on the back  

for about 6 seconds until the Power LED blinks. Then visit  

http://tplinkwifi.net to create a new login password.  

©2021 TP-Link 7106509204 REV1.2.0  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer AX10 Dual Band Wi-Fi 6 Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.6 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer AX10 Dual Band Wi-Fi 6 Router Installation Guide, please ask here and describe the problem in detail.