×
- 1. Ax3000 Gigabit Wi-fi 6 Router (Installation → Setup → Configuration → Connecting To The Internet → Wireless Settings → Troubleshooting)
- 2. About This Guide (Connect The Hardware → Log In To Your Router → Set Up Internet Connection → Tp-link Cloud Service → Wireless Settings)
- 3. Contacttechnicalsupport (Maximumwirelesssignalrates → Useofwi-fi6 → Savingclientsbatterypower → Useofwpa3 → Routerfeaturesupport → Furthersoftwareupgrades)
- 4. Get To Know About Your Router (Product Overview → Appearance)
- 5. Get To Know About Your Router (Product Overview → Appearance → Top Panel → Led Explanation)
- 6. Get To Know About Your Router (Back Panel)
- 7. Get To Know About Your Router (Button And Port Explanation → Wps/wi-fi Button → Reset Button → Wan Port → Lan Port (1-4) → Power On/off Button)
- 8. Connect The Hardware (Position Your Router → Connect Your Router)
- 9. Connect The Hardware (Position Your Router → Connect Your Router)
- 10. Connect The Hardware (Internet → Verify That The Hardware Connection Is Correct → Method 1: Wired → Method 2: Wirelessly)
- 11. Connect The Hardware (Wi-fi → Method 3: Use The Wps Button)
- 12. Log In To Your Router
- 13. Log In To Your Router (Set Up The Tcp/ip Protocol → Visit Http://tplinkwifi.net → Create A Login Password For Secure Management)
- 14. Set Up Internet Connection (Use Quick Setup Wizard → Quick Setup Via Tp-link Tether App → Manually Set Up Your Internet Connection → Set Up The Router As An Access Point → Set Up An Ipv6 Internet Connection)
- 15. Set Up Internet Connection (Use Quick Setup Wizard → Set Up An Ipv6 Internet Connection → Quick Setup Via Tp-link Tether App)
- 16. Set Up Internet Connection (Manually Set Up Your Internet Connection → Connect Your Devices To The Newly Configured Wireless Networks → Modify The Settings According To The Service Information Provided By Your Isp → Visit Http://tplinkwifi.net → Select Your Internet Connection Type From The Drop-down List → Follow The Instructions On The Page To Continue The Configuration)
- 17. Set Up Internet Connection (Static Ip → Pppoe)
- 18. Set Up Internet Connection (Dynamic Ip And Pppoe → Advanced > Network > Internet → Faq)
- 19. Set Up Internet Connection (Set Up The Router As An Access Point → Set Up An Ipv6 Internet Connection)
- 20. Set Up Internet Connection (Enable Ipv6 → Fill In Information As Required By Different Connection Types → Static Ip → Dynamic Ip(slaac/dhcpv6) → Pppoe)
- 21. Set Up Internet Connection (Manually Set Up Your Internet Connection → To4 Tunnel → Pass-through (bridge))
- 22. Set Up Internet Connection (Configure Lan Ports → Check Ipv6 Connection → Visit The Faq Section)
- 23. Tp-link Cloud Service (Register A Tp-link Id → Change Your Tp-link Id Information → Manage The User Tp-link Ids → Manage The Router Via The Tp-link Tether App)
- 24. Tp-link Cloud Service (Register A Tp-link Id → Change Your Tp-link Id Information)
- 25. Tp-link Cloud Service (Manage The User Tp-link Ids)
- 26. Addtp-linkidtomanagetherouter (Removetp-linkid(s)frommanagingtherouter → Manage The Router Via The Tp-link Tether App)
- 27. Manage The Router Via The Tp-link Tether App (Register A Tp-link Id)
- 28. Wireless Settings (Specify Wireless Settings → Schedule Your Wireless Function → Use Wps For Wireless Connection → Advanced Wireless Settings)
- 29. Wireless Settings (Specify Wireless Settings → Enable Or Disable Ofdma → Enable Or Disable Twt → Use The Smart Connect Function)
- 30. Wireless Settings (Enable Smart Connect → Change The Wireless Network Name (ssid) And Wireless Password → Hide Ssid → Change The Security Option → Change The Transmit Power And Channel Settings)
- 31. Wireless Settings (Channel → Mode → Mu-mimo Function → Schedule Your Wireless Function)
- 32. Wireless Settings (Use Wps For Wireless Connection → Connect Via The Clients Pin → Connect Via The Routers Pin)
- 33. Wireless Settings (Push The Wps Button → Advanced Wireless Settings)
- 34. Wireless Settings (Wmm → Ap Isolation → Airtime Fairness → Zero Wait Dfs → Beacon Interval → Rts Threshold)
- 35. Guest Network (Create A Network For Guests → Customize Guest Network Options)
- 36. Create A Network For Guests (Guest Network)
- 37. Guest Network (Customize Guest Network Options → Guest Permissions → Allow Guests To See Each Other → Allow Guests To Access Your Local Network → Save)
- 38. Network Security (Parental Controls → Network Analysis & Optimization)
- 39. Network Security (Iot Protection → Intrusion Prevention System → Malicious Content Filter → Ddos Protection → Parental Controls)
- 40. Homeshield (Child Protection → Family Incentive Program → Network Analysis & Optimization → Weekly And Monthly Reports → Quality Of Service (qos) → Scan)
- 41. Launch The Tether App And Log In With Your Tp-link Id. If You Dont Have An Account, Create One First.
- 42. Set Up A Onemesh Network (Manage Devices In The Onemesh Network)
- 43. Onemesh With Seamless Roaming (Same Network Name & Password → Internet For Seamless Roaming → Unified Wi-fi Network → Seamless Roaming → Easy Setup And Management → Set Up A Onemesh Network)
- 44. Onemesh With Seamless Roaming (Connect A Onemesh Extender To This Router → Check Full List Of Tp-link Onemesh Devices → Set Up The Extender To Join The Onemesh Network → Find It In The Available Onemesh Devices List → Add It To The Onemesh Network → Router And Extender Successfully Form A Onemesh Network!)
- 45. Onemesh With Seamless Roaming (Manage Devices In The Onemesh Network → To View Mesh Devices And Connected Clients In The Network → To Manage A Onemesh Device In The Network)
- 46. Onemesh With Seamless Roaming (Manage The Onemesh Device As Needed → Change Device Information → Manage Device → Leave Onemesh)
- 47. Protect The Network From Cyber Attacks (Access Control → Ip & Mac Binding → Alg)
- 48. Protect The Network From Cyber Attacks (Access Control)
- 49. Network Security (To Allow Specific Device(s): → Add Connected Devices)
- 50. Network Security (Add Unconnected Devices → Ip & Mac Binding)
- 51. Network Security (Ip & Mac Binding → Bind Your Device(s) According To Your Need → View Connected Devices → Save)
- 52. Network Security (Binding The Unconnected Device → Alg)
- 53. Chapter 10 (Network Security)
- 54. Nat Forwarding (Share Local Resources On The Internet By Port Forwarding → Open Ports Dynamically By Port Triggering → Make Applications Free From Port Restriction By Dmz → Make Xbox Online Games Run Smoothly By Upnp)
- 55. Nat Forwarding (Share Local Resources On The Internet By Port Forwarding → Assign A Static Ip Address To Your Pc → Visit Http://tplinkwifi.net → Go To Advanced > Nat Forwarding > Port Forwarding)
- 56. Nat Forwarding (View Common Services → View Connected Devices → Save → Tips)
- 57. Nat Forwarding (Set Up A Dynamic Dns Service Account → Open Ports Dynamically By Port Triggering → Configure The Port Triggering Rules)
- 58. Nat Forwarding (Make Applications Free From Port Restriction By Dmz)
- 59. Nat Forwarding (Assign A Static Ip Address To Your Pc → Go To Advanced > Nat Forwarding > Dmz → Make Xbox Online Games Run Smoothly By Upnp → Upnp Enabled By Default In This Router → Only The Application Supporting Upnp Protocol Can Use This Feature → Upnp Feature Needs The Support Of Operating System)
- 60. Nat Forwarding (Upnp)
- 61. Vpn Server (Use Openvpn To Access Your Home Network → Use Pptp Vpn To Access Your Home Network)
- 62. Use Openvpn To Access Your Home Network (Step1 Set Up Openvpn Server On Your Router → Enable Openvpn → Configure Dynamic Dns Service → Generate A Certificate → Select The Service Type → Enter A Vpn Service Port)
- 63. Vpn Server (Configure Openvpn Connection On Your Remote Device → Set Up Pptp Vpn Server On Your Router)
- 64. Vpn Server (Enable Pptp → Client Ip Address → Pptp Connection Permission → Save → Pptp Vpn Connection Account)
- 65. Vpn Server (Configure Pptp Vpn Connection On Your Remote Device → Set Up A New Connection Or Network → Connect To A Workplace)
- 66. Vpn Server
- 67. Vpn Server
- 68. Vpn Server
- 69. Customize Your Network Settings (Change The Lan Settings → Configure To Support Iptv Service → Specify Dhcp Server Settings → Set Up A Dynamic Dns Service Account → Create Static Routes)
- 70. Customize Your Network Settings (Change The Lan Settings → Configure To Support Iptv Service)
- 71. Customize Your Network Settings (Enable Iptv/vlan → Select The Appropriate Mode → Select Bridge If Your Isp Is Not Listed → Select Custom If Your Isp Is Not Listed But Provides Necessary Parameters → Click Save → Connect The Set-top Box To The Corresponding Lan Port)
- 72. Customize Your Network Settings (Specify Dhcp Server Settings)
- 73. Customize Your Network Settings (Set Up A Dynamic Dns Service Account)
- 74. Customize Your Network Settings (Create Static Routes)
- 75. Customize Your Network Settings (Change The Routers Lan Ip Addresses → Disable Router Bs Dhcp Function → Log In With Your Tp-link Id → Go To Advanced > Network > Routing → Click Add And Finish The Settings)
- 76. Customize Your Network Settings (Network Destination → Subnet Mask → Default Gateway → Interface → Description → Routing Table)
- 77. Upgrade The Firmware (Backup And Restore Configuration Settings → Change The Login Password → Password Recovery → Local Management → Remote Management → System Log)
- 78. Manage The Router (Upgrade The Firmware → Auto Update → Online Upgrade)
- 79. Manage The Router (Online Upgrade → Firmware Upgrade → Local Upgrade)
- 80. Manage The Router (Backup And Restore Configuration Settings)
- 81. Manage The Router (Change The Login Password)
- 82. Manage The Router (Password Recovery → Enable Password Recovery → Specify A Mailbox (from) → Smtp Server Address → Authentication → Click Save)
- 83. Manage The Router (Local Management → Access The Router Via Https And Http → Allow All Lan Connected Devices To Manage The Router → Allow Specific Devices To Manage The Router)
- 84. Manage The Router (Remote Management)
- 85. Manage The Router (Remote Management → Set Up A Dynamic Dns Service Account)
- 86. Manage The Router (Set Up A Dynamic Dns Service Account → System Log)
- 87. Manage The Router (Save Log → Mail Log → Advanced > System Tools > System Log)
- 88. Manage The Router (Test The Network Connectivity)
- 89. Manage The Router (Diagnostics → Ping → Traceroute → Ip Address Or Domain Name → Ping Count → Traceroute Max Ttl)
- 90. Manage The Router (Set System Time And Language)
- 91. Manage The Router (Ntp Server I → Ntp Server Ii → Set Time → Manually Set The Date And Time → Enable Daylight Saving Time)
- 92. Manage The Router (Set System Language → Set The Router To Reboot Regularly)
- 93. Manage The Router (Reboot Time → Control The Led → Night Mode → Led Off Time)
- 94. Manage The Router
- 95. Wireless Password Recovery (Web Management Password Reset → Router Reset Instructions → Logging Into The Router's Web Management Page → Ip Address Configuration → Network Settings Verification)
- 96. Lan Settings (Advanced > Restore Advanced Settings)
- 97. Reset The Router To Factory Default Settings (Reconfigure The Router → Check Internet Status → Manually Configure The Dns Server → Enter 8.8.8.8 As Primary Dns)
- 98. Restart The Modem And The Router (Reset The Router To Factory Default Settings → Upgrade The Firmware Of The Router → Check The Tcp/ip Settings → Make Sure The Physical Connection Between The Router And The Modem Is Proper → Clone The Mac Address Of Your Computer)
- 99. Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id Or The Password You Set For The Router.
- 100. Power Off Your Modem And Router, And Leave Them Off For 1 Minute. (Confirm Your Internet Connection Type, Which Can Be Learned From The Isp. → Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id Or The Password You Set For The Router. → Go To Advanced > Network > Internet. → Select Your Internet Connection Type And Fill In Other Parameters. → Click Save. → Please Upgrade The Firmware Of The Router.)
- 101. Make Sure The Wireless Adapter Driver Is Installed Successfully And The Wireless Adapter Is Enabled. (On Windows 7 → On Windows Xp → Check The Wlan Led Indicator On Your Wireless Router/modem. → Go To Wireless Or Advanced > Wireless > Wireless Settings. → Authenticating Problem/password Mismatch.)
- 102. Fcc Compliance Information Statement (Product Name → Model Number → Component Name → Responsible Party → Address → Website)
- 103. Fcc Rf Radiation Exposure Statement (Fcc Compliance Information Statement → Product Name → Model Number → Responsible Party → Address → Website)
- 104. Eu Declaration Of Conformity (Uk Declaration Of Conformity → Rf Exposure Information → National Restrictions → Canadian Compliance Statement)
- 105. Caution (Radiation Exposure Statement → Industry Canada Statement → Korea Warning Statements → Ncc Notice & Bsmi Notice)
- 106. Safety Information (Operating Temperature → Storage Temperature → Explanations Of The Symbols On The Product Label)
- 107. Class Ii Equipment (Polarity Of Output Terminals → Energy Efficiency Marking → Indoor Use Only → Caution → Operators Manual → Recycling)
×
TP-Link Archer AX53 AX3000 Gigabit Wi-Fi 6 Router User Guide
Chapter 2
Connect the Hardware
1
Internet
2
3
1. Connect the powered-off modem to the router’s WAN port with an Ethernet cable.
2. Turn on the modem, and then wait about 2 minutes for it to restart.
3. Connect the power adapter to the router and turn on the router.
4. Verify that the hardware connection is correct by checking the following LEDs.
Power
On
Internet
On
2.4 GHz
On
5 GHz
On
5. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet cable
• Method 2: Wirelessly
1) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
9
| General | Details |
|---|---|
| Name | TP-Link Archer AX53 AX3000 Gigabit Wi-Fi 6 Router User Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.74 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding TP-Link Archer AX53 AX3000 Gigabit Wi-Fi 6 Router User Guide, please ask here and describe the problem in detail.
TP-Link VR300 Archer Modem Router User Guide
TP-Link T150500-2-DT WiFi Router Instruction Manual
TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide
TP-Link Omada ER8411 VPN Router Instructions
TP-Link Configure VDSL Router User Guide
TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual
TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide
TP-Link VR600 Wireless DSL Modem Router Installation Guide
TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide
TP-Link AC750 Wireless Dual Band Router Owner’s Manual
Firstnum C401 CPE Router User Manual
TELTONIKA RUT200 4G Router User Guide
HUAWEI WS880 802.11ac Wireless Router User Guide
LANCOM SYSTEMS LANCOM 1790-4G Plus High-Performance VPN Router Instruction Manual
TP-Link AC750 Wireless Dual Band Router Owner’s Manual
Cudy WR3000H AX3000 2.5G Mesh Wi-Fi 6 Router Installation Guide
HUAWEI 5G CPE Pro 2 WiFi 6 Router User Guide
Cudy WR3000E Gigabit Mesh WiFi 6 Router Installation Guide
Juniper NETWORKS SSR120 Smart Router User Guide
Cudy AC1200 4G LTE Wi-Fi Router Instruction Manual
Table of Contents
- 1. Ax3000 Gigabit Wi-fi 6 Router - Installation →
- 2. About This Guide - Connect The Hardware →
- 3. Contacttechnicalsupp... - Maximumwirelesssigna... →
- 4. Get To Know About Your Router - Product Overview →
- 5. Get To Know About Your Router - Product Overview →
- 6. Get To Know About Your Router - Back Panel →
- 7. Get To Know About Your Router - Button And Port Explanation →
- 8. Connect The Hardware - Position Your Router →
- 9. Connect The Hardware - Position Your Router →
- 10. Connect The Hardware - Internet →
- 11. Connect The Hardware - Wi-fi →
- 12. Log In To Your Router →
- 13. Log In To Your Router - Set Up The Tcp/ip Protocol →
- 14. Set Up Internet Connection - Use Quick Setup Wizard →
- 15. Set Up Internet Connection - Use Quick Setup Wizard →
- 16. Set Up Internet Connection - Manually Set Up Your Internet C... →
- 17. Set Up Internet Connection - Static Ip →
- 18. Set Up Internet Connection - Dynamic Ip And Pppoe →
- 19. Set Up Internet Connection - Set Up The Router As An Access ... →
- 20. Set Up Internet Connection - Enable Ipv6 →
- 21. Set Up Internet Connection - Manually Set Up Your Internet C... →
- 22. Set Up Internet Connection - Configure Lan Ports →
- 23. Tp-link Cloud Service - Register A Tp-link Id →
- 24. Tp-link Cloud Service - Register A Tp-link Id →
- 25. Tp-link Cloud Service - Manage The User Tp-link Ids →
- 26. Addtp-linkidtomanagetherouter - Removetp-linkid(s)frommanagi... →
- 27. Manage The Router Via The Tp-link Tether App - Register A Tp... →
- 28. Wireless Settings - Specify Wireless Settings →
- 29. Wireless Settings - Specify Wireless Settings →
- 30. Wireless Settings - Enable Smart Connect →
- 31. Wireless Settings - Channel →
- 32. Wireless Settings - Use Wps For Wireless Connection →
- 33. Wireless Settings - Push The Wps Button →
- 34. Wireless Settings - Wmm →
- 35. Guest Network - Create A Network For Guests →
- 36. Create A Network For Guests - Guest Network →
- 37. Guest Network - Customize Guest Network Options →
- 38. Network Security - Parental Controls →
- 39. Network Security - Iot Protection →
- 40. Homeshield - Child Protection →
- 41. Launch The Tether App And Log In With Your Tp-link Id. If Yo... →
- 42. Set Up A Onemesh Network - Manage Devices In The Onemesh Net... →
- 43. Onemesh With Seamless Roaming - Same Network Name & Password →
- 44. Onemesh With Seamless Roaming - Connect A Onemesh Extender T... →
- 45. Onemesh With Seamless Roaming - Manage Devices In The Onemes... →
- 46. Onemesh With Seamless Roaming - Manage The Onemesh Device As... →
- 47. Protect The Network From Cyber Attacks - Access Control →
- 48. Protect The Network From Cyber Attacks - Access Control →
- 49. Network Security - To Allow Specific Device(s): →
- 50. Network Security - Add Unconnected Devices →
- 51. Network Security - Ip & Mac Binding →
- 52. Network Security - Binding The Unconnected Device →
- 53. Chapter 10 - Network Security →
- 54. Nat Forwarding - Share Local Resources On The Internet By Po... →
- 55. Nat Forwarding - Share Local Resources On The Internet By Po... →
- 56. Nat Forwarding - View Common Services →
- 57. Nat Forwarding - Set Up A Dynamic Dns Service Account →
- 58. Nat Forwarding - Make Applications Free From Port Restrictio... →
- 59. Nat Forwarding - Assign A Static Ip Address To Your Pc →
- 60. Nat Forwarding - Upnp →
- 61. Vpn Server - Use Openvpn To Access Your Home Network →
- 62. Use Openvpn To Access Your Home Network - Step1 Set Up Openv... →
- 63. Vpn Server - Configure Openvpn Connection On Your Remote Dev... →
- 64. Vpn Server - Enable Pptp →
- 65. Vpn Server - Configure Pptp Vpn Connection On Your Remote De... →
- 66. Vpn Server →
- 67. Vpn Server →
- 68. Vpn Server →
- 69. Customize Your Network Settings - Change The Lan Settings →
- 70. Customize Your Network Settings - Change The Lan Settings →
- 71. Customize Your Network Settings - Enable Iptv/vlan →
- 72. Customize Your Network Settings - Specify Dhcp Server Settin... →
- 73. Customize Your Network Settings - Set Up A Dynamic Dns Servi... →
- 74. Customize Your Network Settings - Create Static Routes →
- 75. Customize Your Network Settings - Change The Routers Lan Ip ... →
- 76. Customize Your Network Settings - Network Destination →
- 77. Upgrade The Firmware - Backup And Restore Configuration Sett... →
- 78. Manage The Router - Upgrade The Firmware →
- 79. Manage The Router - Online Upgrade →
- 80. Manage The Router - Backup And Restore Configuration Setting... →
- 81. Manage The Router - Change The Login Password →
- 82. Manage The Router - Password Recovery →
- 83. Manage The Router - Local Management →
- 84. Manage The Router - Remote Management →
- 85. Manage The Router - Remote Management →
- 86. Manage The Router - Set Up A Dynamic Dns Service Account →
- 87. Manage The Router - Save Log →
- 88. Manage The Router - Test The Network Connectivity →
- 89. Manage The Router - Diagnostics →
- 90. Manage The Router - Set System Time And Language →
- 91. Manage The Router - Ntp Server I →
- 92. Manage The Router - Set System Language →
- 93. Manage The Router - Reboot Time →
- 94. Manage The Router →
- 95. Wireless Password Recovery - Web Management Password Reset →
- 96. Lan Settings - Advanced > Restore Advanced Settings →
- 97. Reset The Router To Factory Default Settings - Reconfigure T... →
- 98. Restart The Modem And The Router - Reset The Router To Facto... →
- 99. Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id... →
- 100. Power Off Your Modem And Router, And Leave Them Off For 1 Mi... →
- 101. Make Sure The Wireless Adapter Driver Is Installed Successfu... →
- 102. Fcc Compliance Information Statement - Product Name →
- 103. Fcc Rf Radiation Exposure Statement - Fcc Compliance Informa... →
- 104. Eu Declaration Of Conformity - Uk Declaration Of Conformity →
- 105. Caution - Radiation Exposure Statement →
- 106. Safety Information - Operating Temperature →
- 107. Class Ii Equipment - Polarity Of Output Terminals →