×
- 1. Ax3000 Gigabit Wi-fi 6 Router
- 2. About This Guide (Connect The Hardware → Log In To Your Router → Set Up Internet Connection → Tp-link Cloud Service → Wireless Settings)
- 3. Our Technical Support Contact Information Can Be Found At The Contact Technical Support Page At Https://www.tp-link.com/support/.
- 4. Product Overview (Appearance)
- 5. Get To Know About Your Router (Product Overview → Appearance → Top Panel)
- 6. Get To Know About Your Router (Back Panel)
- 7. Get To Know About Your Router (Button And Port Explanation → Wps/wi-fi Button → Reset Button → Wan Port → Lan Port (1-4) → Power On/off Button)
- 8. Connectthehardware (Positionyourrouter → Connectyourrouter)
- 9. Connect The Hardware (Position Your Router → Connect Your Router)
- 10. Connect The Hardware (Internet → Method 1: Wired → Method 2: Wirelessly)
- 11. Connect The Hardware (Wi-fi → Method 3: Use The Wps Button)
- 12. Log In To Your Router
- 13. Log In To Your Router (Set Up The Tcp/ip Protocol → Visit Http://tplinkwifi.net → Create A Login Password For Secure Management)
- 14. Set Up Internet Connection (Use Quick Setup Wizard → Quick Setup Via Tp-link Tether App → Manually Set Up Your Internet Connection → Set Up The Router As An Access Point → Set Up An Ipv6 Internet Connection)
- 15. Set Up Internet Connection (Use Quick Setup Wizard → Set Up An Ipv6 Internet Connection → Quick Setup Via Tp-link Tether App)
- 16. Set Up Internet Connection (Manually Set Up Your Internet Connection → Connect Your Devices → Modify Internet Connection Settings → Select Your Internet Connection Type → Follow The Instructions For Configuration → Clone The Mac Address)
- 17. Set Up Internet Connection (Static Ip → Pppoe)
- 18. Set Up Internet Connection (Secondary Connection → Dynamic Ip And Pppoe → Advanced > Network > Internet → Faq)
- 19. Set Up Internet Connection (Set Up The Router As An Access Point → Set Up An Ipv6 Internet Connection)
- 20. Set Up Internet Connection (Enable Ipv6 And Select The Internet Connection Type Provided By Your Isp → Fill In Information As Required By Different Connection Types → Static Ip → Dynamic Ip(slaac/dhcpv6) → Pppoe)
- 21. Set Up Internet Connection (Manually Set Up Your Internet Connection → To4 Tunnel → Pass-through (bridge))
- 22. Set Up Internet Connection (Configure Lan Ports → Mac Clone → Check Ipv6 Connection Status)
- 23. Register A Tp-link Id (Change Your Tp-link Id Information → Manage The User Tp-link Ids → Manage The Router Via The Tp-link Tether App)
- 24. Register A Tp-link Id (Change Your Tp-link Id Information → Manage The User Tp-link Ids → Manage The Router Via The Tp-link Tether App → Unbind The Admin Tp-link Id From Your Router)
- 25. Tp-link Cloud Service (Change Your Password → Manage The User Tp-link Ids)
- 26. Addtp-linkidtomanagetherouter (Removetp-linkid(s)frommanagingtherouter → Manage The Router Via The Tp-link Tether App)
- 27. Manage The Router Via The Tp-link Tether App (Launch The Apple App Store Or Google Play Store → Connect Your Device To The Routers Wireless Network → Log In With Your Tp-link Id → Register A Tp-link Id)
- 28. Wireless Settings (Specify Wireless Settings → Schedule Your Wireless Function → Use Wps For Wireless Connection → Advanced Wireless Settings)
- 29. Wireless Settings (Specify Wireless Settings → Enable Or Disable Ofdma → Enable Or Disable Twt)
- 30. Wireless Settings (Smart Connect Function → Enable Or Disable Wireless Function → Change Wireless Network Name (ssid) And Password → Hide Ssid → Change Security Option → Change Transmit Power And Channel Settings)
- 31. Wireless Settings (Channel Width → Channel → Mode → Mu-mimo Function → Schedule Your Wireless Function)
- 32. Wireless Settings (Use Wps For Wireless Connection → Connect Via The Clients Pin)
- 33. Wireless Settings (Connect Via The Routers Pin → Push The Wps Button → Advanced Wireless Settings)
- 34. Wireless Settings (Configure Advanced Wireless Settings → Wmm → Ap Isolation → Airtime Fairness → Beacon Interval → Rts Threshold)
- 35. Guest Network (Create A Network For Guests → Customize Guest Network Options)
- 36. Create A Network For Guests (Enable Bandwidth Control → Set The Effective Time To Keep The Guest Network → Select The Security Type And Customize Your Own Password → Click Save → Share Network)
- 37. Guest Network (Customize Guest Network Options → Allow Guests To See Each Other → Allow Guests To Access Your Local Network)
- 38. Iot Network
- 39. Iot Network (Create An Iot Network As Needed → Enable Checkbox For The 2.4ghz, Or 5 Ghz Wireless Network → Customize The Ssid → Select The Security Type And Customize Your Own Password → Click Save → Share Network)
- 40. Network Security (Parental Controls → Network Analysis & Optimization)
- 41. Network Security (Iot Protection → Intrusion Prevention System → Malicious Content Filter → Ddos Protection → Parental Controls)
- 42. Homeshield (Child Protection → Family Incentive Program → Family Time → Network Analysis & Optimization → Weekly And Monthly Reports → Quality Of Service (qos))
- 43. Homeshield (Launch The Tether App And Log In With Your Tp-link Id → Log In To Your Router And Tap The Homeshield Tab)
- 44. Add A Router As A Satellite Device (Add A Range Extender As A Satellite Device → Manage Devices In The Easymesh Network)
- 45. Add A Router As A Satellite Device (Easymesh With Seamless Roaming)
- 46. Easymesh With Seamless Roaming (Add A Range Extender As A Satellite Device)
- 47. Easymesh With Seamless Roaming (Plug In The Extender Next To The Main Router → Press The Wps Button On Main Router And On The Extender → Wps Process Is Complete)
- 48. Easymesh With Seamless Roaming (Manage Devices In The Easymesh Network → View Mesh Devices And Connected Clients → Manage An Easymesh Device → Change Device Information)
- 49. Protect The Network From Cyber Attacks (Access Control → Ip & Mac Binding → Alg → Device Isolation)
- 50. Protectthenetworkfromcyberattacks (Accesscontrol)
- 51. Network Security (Allow Specific Device(s): → Add Connected Devices)
- 52. Network Security (Add Unconnected Devices → Ip & Mac Binding)
- 53. Network Security (Ip & Mac Binding → Bind Your Device(s) According To Your Need → Locate The Arp List Section → Enable Bind → Add A Binding Entry → View Connected Devices)
- 54. Network Security (Alg)
- 55. Device Isolation (Network Security → Installation Steps → Accessing The Router → Enabling Device Isolation → Adding Iot Devices → Isolated Device Communication)
- 56. Nat Forwarding (Share Local Resources On The Internet By Port Forwarding → Open Ports Dynamically By Port Triggering → Make Applications Free From Port Restriction By Dmz → Make Xbox Online Games Run Smoothly By Upnp)
- 57. Nat Forwarding (Share Local Resources On The Internet By Port Forwarding → Assign A Static Ip Address To Your Pc → Visit Http://tplinkwifi.net → Go To Advanced > Nat Forwarding > Port Forwarding)
- 58. Nat Forwarding (View Common Services → View Connected Devices → Device Ip Address → Save → Tips)
- 59. Nat Forwarding (Set Up A Dynamic Dns Service Account → Open Ports Dynamically By Port Triggering → Configure The Port Triggering Rules)
- 60. Nat Forwarding (Make Applications Free From Port Restriction By Dmz → Warning: Dmz Is Totally Exposed To The Internet, Which May Bring Some Potential Safety Hazards.)
- 61. Nat Forwarding (Assign A Static Ip Address To Your Pc → Enable Dmz → Make Xbox Online Games Run Smoothly By Upnp)
- 62. Nat Forwarding (Upnp)
- 63. Vpn Server (Openvpn → Pptp Vpn → L2tp/ipsec Vpn → Wireguard Vpn → Vpn Client → Use Vpn Client To Access A Remote Vpn Server)
- 64. Use Openvpn To Access Your Home Network (Set Up Openvpn Server On Your Router)
- 65. Vpn Server & Client (Configure Openvpn Connection On Your Remote Device → Use Pptp Vpn To Access Your Home Network → Set Up Pptp Vpn Server On Your Router)
- 66. Vpn Server & Client (Enable Pptp → Dynamic Dns Service → Client Ip Address → Pptp Connection Permission → Save → Pptp Vpn Connection Account)
- 67. Vpn Server & Client (Configure Pptp Vpn Connection On Your Remote Device → Set Up A New Connection Or Network → Connect To A Workplace)
- 68. Vpn Server & Client
- 69. Vpn Server & Client
- 70. Use L2tp/ipsec Vpn To Access Your Home Network (Set Up L2tp/ipsec Vpn Server On Your Router)
- 71. Vpn Server & Client (Client Ip Address → Ipsec Encryption → Ipsec Pre-shared Key → Configure The L2tp/ipsec Vpn Connection Account → Username And Password → Configure L2tp/ipsec Vpn Connection On Your Remote Device)
- 72. Vpn Server & Client (Set Up A New Connection Or Network → Connect To A Workplace)
- 73. Vpn Server & Client (Use My Internet Connection (vpn) → Enter The Internet Ip Address Of The Router → Dont Connect Now; Just Set It Up So I Can Connect Later → Enter The User Name And Password)
- 74. Vpn Server & Client
- 75. Vpn Server & Client
- 76. Vpn Server & Client (Security → Layer 2 Tunneling Protocol With Ipsec (l2tp/ipsec) → Advanced Settings → Use Preshared Key For Authentication → Ipsec Pre-shared Key → Connect To Start Vpn Connection)
- 77. Use Wireguard Vpn To Access Your Home Network (Set Up Wireguard Vpn Server On Your Router)
- 78. Vpn Server & Client (Set The Tunnel Ip Address And Listen Port → Select Your Client Access Type → Advanced Settings → Create Accounts That Can Be Used By Remote Clients To Connect To The Vpn Server → Enable Or Disable Pre-shared Key → Click Save)
- 79. Vpn Server & Client (Connect To The Wireguard Server → Export To Save The Wireguard Vpn Configuration File → Modify The Vpn Server Settings → Connect To The Server → Delete The Account)
- 80. Vpn Client To Access A Remote Vpn Server (Use The Vpn Feature → Visit Http://tplinkwifi.net → Go To Advanced > Vpn Client → Enable Vpn Client → Add Vpn Servers → Specify A Description For The Vpn)
- 81. Vpn Server & Client (Openvpn → Enter The Vpn Information Provided By Your Vpn Provider. → Import The Ca File Or Edit The .ovpn File Manually)
- 82. Vpn Server & Client (Pptp → L2tp/ipsec Vpn)
- 83. Vpn Server & Client (Wireguard Vpn)
- 84. Vpn Server & Client
- 85. Vpn Server & Client (Add And Manage The Devices That Will Use The Vpn Function → Device List → Save The Settings)
- 86. Vpn Server & Client
- 87. Customize Your Network Settings (Change The Internet Settings → Change The Lan Settings → Configure To Support Iptv Service → Specify Dhcp Server Settings → Set Up A Dynamic Dns Service Account → Create Static Routes)
- 88. Customizeyournetworksettings (Changetheinternetsettings)
- 89. Customizeyournetworksettings (Changethemacaddressoftherouter → Setupnat → Changetheinternetportnegotiationspeedsetting → Enableflowcontroller)
- 90. Customizeyournetworksettings (Changethelansettings → Toenableflowcontroller)
- 91. Customizeyournetworksettings (Configuretosupportiptvservice → Iptvsetup → Advanced>network>iptv/vlan → Igmpproxyandigmpsnooping → Enableiptv/vlan → Selecttheappropriatemode)
- 92. Customizeyournetworksettings (Specifydhcpserversettings)
- 93. Customize Your Network Settings (Set Up A Dynamic Dns Service Account)
- 94. Customizeyournetworksettings (Dynamicdns → Ddnsserviceprovider → Registernow → Domainnamelist)
- 95. Customizeyournetworksettings (Createstaticroutes)
- 96. Customizeyournetworksettings (Changetherouterslanipaddresses → Visithttp://tplinkwifi.net → Gotoadvancednetworkrouting → Clickaddandfinishthesettings → Networkdestination → Defaultgateway)
- 97. Customizeyournetworksettings (Interface → Description → Clicksave → Checktheroutingtable → Done → Openawebbrowseronyourpc)
- 98. Upgrade The Firmware (Backup And Restore Configuration Settings → Change The Login Password → Password Recovery → Local Management → Remote Management → System Log)
- 99. Upgrade The Firmware (Auto Update → Online Upgrade)
- 100. Manage The Router (Online Upgrade → Local Upgrade → Firmware Upgrade → Advanced → System)
- 101. Manage The Router (Easymesh Satellite Update → Backup And Restore Configuration Settings)
- 102. Manage The Router (Restore Configuration Settings → Reset The Router Except Your Login Password And Tp-link Id → Reset The Router To Factory Default Settings)
- 103. Manage The Router (Change The Login Password → Password Recovery)
- 104. Manage The Router (Local Management → Authentication → Smtp Server → Access The Router Via Https And Http)
- 105. Manage The Router (Allow All Lan Connected Devices To Manage The Router → Allow Specific Devices To Manage The Router)
- 106. Manage The Router (Remote Management)
- 107. Manage The Router (Set Up A Dynamic Dns Service Account → Allow A Specific Device To Manage The Router Remotely → System Log)
- 108. Manage The Router (System Log → Save Log → Mail Log)
- 109. Manage The Router (Test The Network Connectivity)
- 110. Manage The Router (Diagnostics → Ping → Traceroute → Ip Address Or Domain Name → Ping Count → Ping Packet Size)
- 111. Manage The Router (Set System Time And Language)
- 112. Manage The Router (Ntp Server I → Ntp Server Ii → Set Time → Manually Set The Date And Time → Enable Daylight Saving Time)
- 113. Manage The Router (Set System Language → Set The Router To Reboot Regularly)
- 114. Manage The Router (Control The Led → Reboot Time → Night Mode → Led Control)
- 115. Manage The Router
- 116. Wireless Password Recovery (Web Management Password Reset → Router Reset Instructions → Logging Into The Router's Web Management Page → Ip Address Configuration → Network Settings Verification → Password Recovery Configuration)
- 117. Clicklansettingsanddeselectthefollowingthreeoptionsandclickok.go Toadvanced>restoreadvancedsettings,clickoktosavethesettings.
- 118. Reset The Router To Factory Default Settings (Reconfigure The Router To Surf The Internet → Check Internet Status → Manually Configure The Dns Server)
- 119. Restart The Modem And The Router (Reset The Router To Factory Default Settings And Reconfigure The Router → Upgrade The Firmware Of The Router → Check The Tcp/ip Settings On The Particular Device → Make Sure The Physical Connection Between The Router And The Modem Is Proper → Clone The Mac Address Of Your Computer)
- 120. Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id Or The Password You Set For The Router.
- 121. Power Off Your Modem And Router (Confirm Your Internet Connection Type → Visit Http://tplinkwifi.net → Select Your Internet Connection Type → Click Save → Restart The Modem And The Router Again → Please Upgrade The Firmware Of The Router)
- 122. Make Sure The Wireless Adapter Driver Is Installed Successfully And The Wireless Adapter Is Enabled. (Troubleshooting Wireless Connections On Windows 7 → Troubleshooting Wireless Connections On Windows Xp → Check The Wlan Led Indicator On Your Wireless Router/modem → Ensure Your Computer/device Is Within Range Of Your Router/modem → Verify Wireless Settings And Ssid Visibility → Resolving Authenticating Problems/password Mismatch)
- 123. Fcc Compliance Information Statement (Product Name → Model Number → Component Name → Responsible Party → Address → Website)
- 124. Fcc Rf Radiation Exposure Statement (Fcc Compliance Information Statement → Product Name → Model Number → Responsible Party → Address → Website)
- 125. Rf Exposure Information (National Restrictions → Ukca Mark → Uk Declaration Of Conformity)
- 126. Canadian Compliance Statement (Caution → Radiation Exposure Statement)
- 127. Déclaration Dexposition Aux Radiations (Industry Canada Statement → Korea Warning Statements → Ncc Notice & Bsmi Notice → 安全諮詢及注意事項)
- 128. Safety Information
- 129. Operating Temperature: 0~40 (Explanations Of The Symbols On The Product Label)
- 130. Functional Earthing (Operators Manual → Disconnection, All Power Plugs → Caution, Hot Surface → Caution → Fuse → Recycling)
×
TP-Link Archer AX53 Gigabit Wi-Fi 6 Router User Guide
Chapter 10
EasyMesh with Seamless Roaming
10 3 Manage Devices in the EasyMesh Network
In an EasyMesh network, you can manage all mesh devices and connected clients on
your main router’s web page.
•
To view mesh devices and connected clients in the network:
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Network Map.
3. Click
to view all mesh devices, and click
to view all connected clients.
•
To manage an EasyMesh device in the network:
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > EasyMesh.
3. Click the Modify button to view detailed information and change its settings.
•
•
•
Change device information.
Click Manage to redirect to the web management page of this device.
Click Remove to delete this device from the EasyMesh network.
47
| General | Details |
|---|---|
| Name | TP-Link Archer AX53 Gigabit Wi-Fi 6 Router User Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 11.78 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding TP-Link Archer AX53 Gigabit Wi-Fi 6 Router User Guide, please ask here and describe the problem in detail.
TP-Link T150500-2-DT WiFi Router Instruction Manual
TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide
TP-Link VR300 Archer Modem Router User Guide
TP-Link Omada ER8411 VPN Router Instructions
TP-Link Configure VDSL Router User Guide
TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual
TP-Link VR600 Wireless DSL Modem Router Installation Guide
TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide
TP-Link AC750 Wireless Dual Band Router Owner’s Manual
TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide
rock space RSD0616 AX1800 Wi-Fi 6 WiFi Router Installation Guide
Raymarine YachtSense Link 4G Marine Cloud Router Instruction Manual
acer W6X PREDATOR Connect Wi-Fi 6 Router Instructions
NETGEAR Nighthawk Tri-Band WiFi 6 Router RAX200 User Guide
DrayTek Vigor 1000B Multi WAN Load Balancing Router User Guide
Adtran 834-5 SDG PlumeOS Dual-Band Wi-Fi 5 Plume Enabled Ethernet Router User Manual
more BYO Router Installation Guide
HNK AX3000 Dual Band Wi-Fi 6 Router User Guide
KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide
TP-Link ER706W4G Gigabit VPN Router Installation Guide
Table of Contents
- 1. Ax3000 Gigabit Wi-fi 6 Router →
- 2. About This Guide - Connect The Hardware →
- 3. Our Technical Support Contact Information Can Be Found At Th... →
- 4. Product Overview - Appearance →
- 5. Get To Know About Your Router - Product Overview →
- 6. Get To Know About Your Router - Back Panel →
- 7. Get To Know About Your Router - Button And Port Explanation →
- 8. Connectthehardware - Positionyourrouter →
- 9. Connect The Hardware - Position Your Router →
- 10. Connect The Hardware - Internet →
- 11. Connect The Hardware - Wi-fi →
- 12. Log In To Your Router →
- 13. Log In To Your Router - Set Up The Tcp/ip Protocol →
- 14. Set Up Internet Connection - Use Quick Setup Wizard →
- 15. Set Up Internet Connection - Use Quick Setup Wizard →
- 16. Set Up Internet Connection - Manually Set Up Your Internet C... →
- 17. Set Up Internet Connection - Static Ip →
- 18. Set Up Internet Connection - Secondary Connection →
- 19. Set Up Internet Connection - Set Up The Router As An Access ... →
- 20. Set Up Internet Connection - Enable Ipv6 And Select The Inte... →
- 21. Set Up Internet Connection - Manually Set Up Your Internet C... →
- 22. Set Up Internet Connection - Configure Lan Ports →
- 23. Register A Tp-link Id - Change Your Tp-link Id Information →
- 24. Register A Tp-link Id - Change Your Tp-link Id Information →
- 25. Tp-link Cloud Service - Change Your Password →
- 26. Addtp-linkidtomanagetherouter - Removetp-linkid(s)frommanagi... →
- 27. Manage The Router Via The Tp-link Tether App - Launch The Ap... →
- 28. Wireless Settings - Specify Wireless Settings →
- 29. Wireless Settings - Specify Wireless Settings →
- 30. Wireless Settings - Smart Connect Function →
- 31. Wireless Settings - Channel Width →
- 32. Wireless Settings - Use Wps For Wireless Connection →
- 33. Wireless Settings - Connect Via The Routers Pin →
- 34. Wireless Settings - Configure Advanced Wireless Settings →
- 35. Guest Network - Create A Network For Guests →
- 36. Create A Network For Guests - Enable Bandwidth Control →
- 37. Guest Network - Customize Guest Network Options →
- 38. Iot Network →
- 39. Iot Network - Create An Iot Network As Needed →
- 40. Network Security - Parental Controls →
- 41. Network Security - Iot Protection →
- 42. Homeshield - Child Protection →
- 43. Homeshield - Launch The Tether App And Log In With Your Tp-l... →
- 44. Add A Router As A Satellite Device - Add A Range Extender As... →
- 45. Add A Router As A Satellite Device - Easymesh With Seamless ... →
- 46. Easymesh With Seamless Roaming - Add A Range Extender As A S... →
- 47. Easymesh With Seamless Roaming - Plug In The Extender Next T... →
- 48. Easymesh With Seamless Roaming - Manage Devices In The Easym... →
- 49. Protect The Network From Cyber Attacks - Access Control →
- 50. Protectthenetworkfro... - Accesscontrol →
- 51. Network Security - Allow Specific Device(s): →
- 52. Network Security - Add Unconnected Devices →
- 53. Network Security - Ip & Mac Binding →
- 54. Network Security - Alg →
- 55. Device Isolation - Network Security →
- 56. Nat Forwarding - Share Local Resources On The Internet By Po... →
- 57. Nat Forwarding - Share Local Resources On The Internet By Po... →
- 58. Nat Forwarding - View Common Services →
- 59. Nat Forwarding - Set Up A Dynamic Dns Service Account →
- 60. Nat Forwarding - Make Applications Free From Port Restrictio... →
- 61. Nat Forwarding - Assign A Static Ip Address To Your Pc →
- 62. Nat Forwarding - Upnp →
- 63. Vpn Server - Openvpn →
- 64. Use Openvpn To Access Your Home Network - Set Up Openvpn Ser... →
- 65. Vpn Server & Client - Configure Openvpn Connection On Your R... →
- 66. Vpn Server & Client - Enable Pptp →
- 67. Vpn Server & Client - Configure Pptp Vpn Connection On Your ... →
- 68. Vpn Server & Client →
- 69. Vpn Server & Client →
- 70. Use L2tp/ipsec Vpn To Access Your Home Network - Set Up L2tp... →
- 71. Vpn Server & Client - Client Ip Address →
- 72. Vpn Server & Client - Set Up A New Connection Or Network →
- 73. Vpn Server & Client - Use My Internet Connection (vpn) →
- 74. Vpn Server & Client →
- 75. Vpn Server & Client →
- 76. Vpn Server & Client - Security →
- 77. Use Wireguard Vpn To Access Your Home Network - Set Up Wireg... →
- 78. Vpn Server & Client - Set The Tunnel Ip Address And Listen P... →
- 79. Vpn Server & Client - Connect To The Wireguard Server →
- 80. Vpn Client To Access A Remote Vpn Server - Use The Vpn Featu... →
- 81. Vpn Server & Client - Openvpn →
- 82. Vpn Server & Client - Pptp →
- 83. Vpn Server & Client - Wireguard Vpn →
- 84. Vpn Server & Client →
- 85. Vpn Server & Client - Add And Manage The Devices That Will U... →
- 86. Vpn Server & Client →
- 87. Customize Your Network Settings - Change The Internet Settin... →
- 88. Customizeyournetwork... - Changetheinternetset... →
- 89. Customizeyournetworksettings - Changethemacaddressoftheroute... →
- 90. Customizeyournetwork... - Changethelansettings →
- 91. Customizeyournetwork... - Configuretosupportip... →
- 92. Customizeyournetwork... - Specifydhcpserverset... →
- 93. Customize Your Network Settings - Set Up A Dynamic Dns Servi... →
- 94. Customizeyournetwork... - Dynamicdns →
- 95. Customizeyournetwork... - Createstaticroutes →
- 96. Customizeyournetworksettings - Changetherouterslanipaddresse... →
- 97. Customizeyournetwork... - Interface →
- 98. Upgrade The Firmware - Backup And Restore Configuration Sett... →
- 99. Upgrade The Firmware - Auto Update →
- 100. Manage The Router - Online Upgrade →
- 101. Manage The Router - Easymesh Satellite Update →
- 102. Manage The Router - Restore Configuration Settings →
- 103. Manage The Router - Change The Login Password →
- 104. Manage The Router - Local Management →
- 105. Manage The Router - Allow All Lan Connected Devices To Manag... →
- 106. Manage The Router - Remote Management →
- 107. Manage The Router - Set Up A Dynamic Dns Service Account →
- 108. Manage The Router - System Log →
- 109. Manage The Router - Test The Network Connectivity →
- 110. Manage The Router - Diagnostics →
- 111. Manage The Router - Set System Time And Language →
- 112. Manage The Router - Ntp Server I →
- 113. Manage The Router - Set System Language →
- 114. Manage The Router - Control The Led →
- 115. Manage The Router →
- 116. Wireless Password Recovery - Web Management Password Reset →
- 117. Clicklansettingsanddeselectthefollowingthreeoptionsandclicko... →
- 118. Reset The Router To Factory Default Settings - Reconfigure T... →
- 119. Restart The Modem And The Router - Reset The Router To Facto... →
- 120. Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id... →
- 121. Power Off Your Modem And Router - Confirm Your Internet Conn... →
- 122. Make Sure The Wireless Adapter Driver Is Installed Successfu... →
- 123. Fcc Compliance Information Statement - Product Name →
- 124. Fcc Rf Radiation Exposure Statement - Fcc Compliance Informa... →
- 125. Rf Exposure Information - National Restrictions →
- 126. Canadian Compliance Statement - Caution →
- 127. Déclaration Dexposition Aux Radiations - Industry Canada Sta... →
- 128. Safety Information →
- 129. Operating Temperature: 0~40 - Explanations Of The Symbols On... →
- 130. Functional Earthing - Operators Manual →