TP-Link Archer C20 Wireless Dual Band Router Installation Guide

1

2

Quick Installation Guide  

Wireless Dual-Band Router  

Set up with videos:  

Scan the QR code or visit  

Important  

https://www.tp-link.com/support/setup-video/#wi-fi-routers to  

search for the setup video of your product.  

Unplug your modem, and remove  

the backup battery if it has one.  

Power adapter  

* Images may differ from actual products.  

Router Mode  

Wi-Fi  

/WPS  

POWER  

RESET  

WAN  

1

2

3

4

POWER  

WAN  

Router  

Modem  

If your internet comes from an Ethernet outlet, connect  

the router’s WAN port to it, then follow Step 4 and Step  

5 to complete the hardware connection.  

Connect to the internet  

If you want to configure this new router as an access  

point to extend your network, refer to the Access Point  

Mode section on the back page.  

er socket  

Connect to the pow  

Connect the powered-off  

modem to the router’s WAN  

port with an Ethernet cable.  

Power on the modem, and then  

wait about 2 minutes for it to  

restart.  

Connect the power adapter to  

the router and turn it on.  

Power On/Off  

Configure the router  

Verify that the following LEDs stay solid on to confirm  

the hardware is connected correctly.  

1. Connect your computer to the router (Wired or Wireless).  

2. Launch a web browser, and enter http://tplinkwifi.net or  

http://192.168.0.1 in the address bar. Create a password to log in.  

Wired  

Note: If the login window does not appear, please refer to FAQ > Q1.  

Turn off the Wi-Fi on your computer and connect it to the router  

via an Ethernet cable.  

Power  

On  

Internet  

On  

2.4GHz 5GHz  

On On  

http://tplinkwifi.net  

Password  

Wireless  

Confirm Password  

Start  

a. Find the product label at the  

bottom of the router.  

b. Use the default network names  

(SSIDs) and password to join the  

2.4 GHz or 5 GHz network.  

Tip: If you are using a smartphone or  

tablet, you can scan the QR code to join  

the preset 2.4 GHz network directly.  

Note: If the 2.4 GHz LED and 5 GHz LED are off,  

press and hold the WPS/Wi-Fi button on the  

rear panel for about 5 seconds, then release  

the button. Both LEDs will turn on.  

QR  

Code  

SSID:TP-Link_XXXX  

SSID:TP-Link_XXXX_5G  

3. Run the Quick Setup, select Wireless Router and follow the  

step-by-step instructions to set up the internet connection.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer C20 Wireless Dual Band Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.22 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer C20 Wireless Dual Band Router Installation Guide, please ask here and describe the problem in detail.