TP-Link Archer C20 Wireless Dual Band Router Installation Guide

1

2

Access Point Mode  

Range Extender Mode  

Button Explanation  

In this mode, the router transforms your existing wired network to  

a wireless one.  

In this mode, the router boosts the existing wireless coverage in  

your home.  

BUTTON DESCRIPTION  

Press and hold for 1 second to enable the WPS function.  

WPS/Wi-Fi Press and hold for about 5 seconds to turn on or off the  

1. Configure  

wireless function of the router.  

A. Place the router next to your host router and power it on.  

WAN  

Ethernet1Ethernet2Ethernet3Ethernet4  

Press and hold this button until all LEDs turn off to reset  

Ethernet  

WAN  

Reset  

B. Connect a computer to the router via an Ethernet cable or wirelessly by  

using the SSID (network name) and Wireless Password printed on the  

label at the bottom of the router.  

the router to its factory default settings.  

Wired Router  

Router  

Client  

C. Launch a web browser and enter http://tplinkwifi.net in the address bar.  

Tether App  

A. Power on the router.  

Create a password to log in.  

TP-Link Tether app provides a simple, intuitive  

way to access and manage your router. Scan the  

QR code to download Tether from the Apple App  

Store or Google Play.  

B. Connect the router’s WAN port to your wired router’s Ethernet port via  

an Ethernet cable as shown above.  

D. Run the Quick Setup, select Range Extender and follow the step-by-step  

instructions of the Quick Setup to set up the internet connection.  

C. Connect a computer to the router via an Ethernet cable or wirelessly by  

using the SSID (network name) and Wireless Password printed on the  

label at the bottom of the router.  

2. Relocate  

Place the router about halfway between your host router and the Wi-Fi  

“dead” zone. The location you choose must be within the range of your  

existing host network.  

D. Launch a web browser and enter http://tplinkwifi.net in the address bar.  

Create a password to log in.  

More Features  

E. Run the Quick Setup, select Access Point and follow the step-by-step  

instructions of the Quick Setup to set up the internet connection.  

The TP-Link router supports various features, including Guest  

Network, Parental Controls, Access Control and more.  

You can log in to the router’s web management page at  

http://tplinkwifi.net to configure these functions. For instructions,  

please refer to the user guide at https://www.tp-link.com.  

Host Network  

Extended Network  

Host Router  

Router  

Devices  

FAQ (Frequently Asked Questions)  

A4. For cable modem users, log in to the web management page of the  

router. Go to Network > MAC Clone, click Clone MAC Address and  

click Save, then reboot both the modem and the router.  

router’s web management page, and go to Wireless 2.4GHz (or  

Wireless 5GHz) > Wireless Security to obtain or reset your wireless  

password.  

Q1. What can I do if the login window does not appear?  

A1. Reboot your router and try again.  

A2. If the computer is set to a static or fixed IP address, change the  

setting to obtain an IP address automatically.  

A3. Verify that http://tplinkwifi.net is correctly entered in the web  

browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1  

in the web browser and press Enter.  

Q3. How do I restore the router to its factory default settings?  

Safety Information  

· Keep the device away from water, fire, humidity or hot environments.  

· Do not attempt to disassemble, repair, or modify the device. If you need  

service, please contact us.  

A1. While the router is powered on, press and hold the Reset button on the  

rear panel of the router until all LEDs turn off, then release the button.  

A2. Log in to the web management page of the router. Go to System Tools  

> Factory Defaults, click Restore. The router will restore and reboot  

automatically.  

· Do not use any other chargers than those recommended.  

· Do not use damaged charger or USB cable to charge the device.  

· Do not use the device where wireless devices are not allowed.  

· Adapter shall be installed near the equipment and shall be easily accessible.  

A4. Use another web browser and try again.  

A5. Disable then re-enable the network adapter being used.  

Q2. What can I do if I cannot access the internet?  

A1. Reboot your modem and router, then try again.  

Q4. What can I do if I forgot my web management password?  

A. Refer to FAQ > Q3 to reset the router, and then create a password to  

log in.  

A2. Check if the internet is working properly by connecting a computer  

directly to the modem using an Ethernet cable. If it is not, contact  

your internet service provider.  

A3. Log in to the web management page of the router, and go to the  

Status page to check whether the WAN IP address is valid or not. If it  

is, please run the Quick Setup again; otherwise, recheck the  

hardware connection.  

For technical support, replacement services, user guides, and  

other information, please visit https://www.tp-link.com/support,  

or simply scan the QR code.  

Q5. What can I do if I forgot my wireless network password?  

A1. The factory default Wireless Password/PIN is printed on the product  

label of the router.  

To communicate with TP-Link users or engineers, please join the TP-Link  

Community at https://community.tp-link.com.  

A2. Connect a computer to the router via an Ethernet cable. Log in to the  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer C20 Wireless Dual Band Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.22 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer C20 Wireless Dual Band Router Installation Guide, please ask here and describe the problem in detail.