TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide

1

2

1. Connect the Hardware  

a. Insert the Nano SIM card into  

the slot until you hear a click.  

b. Connect the power adapter  

to the router.  

Quick Installation Guide  

Power Adapter  

Wireless 4G LTE Router  

Tip:  

Images may differ from actual products.  

You can also install and enable external antennas (not provided).  

For detailed instructions, refer to the user guide at  

https://www.tp-link.com/en/support/download/  

©2023 TP-Link 7106510851 REV1.0.1  

2. Verify the Hardware Connection  

3. Enjoy the Internet  

Check the following LEDs’ status. If the Internet LED  

connected to the internet successfully.  

is on, your router is  

Wired  

Connect your computer to the router's LAN port via an Ethernet cable.  

Power  

On  

Internet  

On  

Wi-Fi  

On  

Wireless  

a.  

b.  

Find the default SSIDs (network names)  

and wireless password printed on the  

label at the bottom of the router.  

Note: If the Internet LED does not turn on, please refer to Q2 of Need Help in this guide.  

Wireless Password/PIN: XXXXXXXX  

SSID:TP-Link_XXXX  

SSID:TP-Link_XXXX_5G  

For better internet connection, make sure or is lit. Otherwise, try relocating the  

router to a spot that may receive a stronger mobile network signal, such as near a  

window.  

Wireless Password/PIN: XXXXXXXX  

SSID:TP-Link_XXXX  

SSID:TP-Link_XXXX_5G  

Click the network icon of your computer or go to Wi-Fi settings of your smart device,  

and then select the SSID to join the network.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.5 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide Overview

Summary of Contents

• Page 1: Connect the hardware by inserting the Nano SIM card into the slot until you hear a click and connecting the power adapter to the router. Verify the hardware connection by checking the status of the Internet LED; if it is on, your router is connected to the internet successfully. Connect your computer to the router's LAN port via an Ethernet cable. Find the default SSIDs and wireless password printed on the label at the bottom of the router. For better internet connection, ensure the appropriate LEDs are lit and consider relocating the router for a stronger mobile network signal. Click the network icon on your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.
• Page 2: Configure the router via Tether app. The TP-Link Tether app provides a simple, intuitive way to access and manage your router. Make sure your computer is connected to the router (wired or wireless). Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1. Create a new password for future logins. Follow the step-by-step instructions of the Quick Setup to complete the initial configuration. The router can also be used in Wireless Router Mode for DSL/Cable/Fiber connections. With the router powered on, press and hold the WPS/RESET button on the rear panel of the router until the Power LED starts flashing. Reboot your router and try again if you cannot access the web management page. Verify that your SIM card is an LTE or WCDMA card. Go to Advanced > Network > Internet to verify the parameters provided by your ISP are correctly entered. Do not use any other chargers than those recommended.