TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide

1

2

Configure the Router via Tether App  

Customize the 4G LTE Router  

The TP-Link Tether app provides a simple, intuitive way to access and manage your router.  

1. Make sure your computer is connected to the router (wired or wireless).  

2. Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1.  

Create a new password for future logins.  

Block unwelcome users from Change basic wireless View information about clients Set up Parental Controls  

accessing your network  

network settings  

connected to your router  

with access time  

Note: If the login page does not appear, please refer to Q1 of Need Help? in this guide.  

How to begin?  

http://tplinkmodem.net  

1. Download the TP-Link Tether app.  

New Password  

Low  

Middle  

High  

Confirm Password  

or  

Let’s Get Started  

Scan for Tether  

Tether  

3. Follow the step-by-step instructions of the Quick Setup to complete the initial  

2. Open the Tether app and log in with your TP-Link ID.  

configuration.  

Note: If you don’t have an account, create one first.  

Note: The router can also be used (or configured) in Wireless Router Mode for DSL/Cable/Fiber  

connections. For more advanced configurations, please refer to the user guide on TP-Link  

official website at www.tp-link.com.  

3. Tap the icon in the Tether app and select 3G/4G Router.  

Follow the steps to complete the setup.  

Q3. How do I restore the router to its factory default settings?  

•

With the router powered on, press and hold the WPS/RESET button on the rear panel of the router until  

the Power LED starts flashing, then release the button. Wait until the router reboots.  

Log in to the web management page of the router, and go to Advanced > System > Backup & Restore,  

click FACTORY RESTORE and wait until the reset process is complete.  

Need Help?  

Q1. What should I do if I cannot access the web management page?  

•

•

•

•

•

•

Reboot your router and try again.  

If the computer is set to a static IP address, change its settings to obtain an IP address automatically.  

Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser.  

Use another web browser and try again.  

Q4. What should I do if I forget my web management page password?  

Refer to Q3 to reset the router, then create a new password to log in.  

•

Q5. What should I do if I forget my wireless network password?  

•

•

Disable and enable the active network adapter in use.  

The default wireless password is printed on the product label of the router.  

Connect a computer directly to the router via an Ethernet cable. Log in to the router's web management  

page and go to Wireless to retrieve or reset your wireless password.  

Q2. What should I do if I cannot access the internet?  

•

•

•

•

Verify that your SIM card is an LTE or WCDMA card.  

Verify that your SIM card is in your internet service provider’s service area.  

Verify that your SIM card has sufficient credit.  

Launch a web browser, log in to the web management page, and check the following:  

1) Go to Advanced > MBB > PIN Management to verify if PIN is required. If it is, enter the correct PIN  

provided by your ISP, and click SAVE.  

For technical support, replacement services, user guides, and other information, please visit  

https://www.tp-link.com/support, or simply scan the QR code.  

EU Declaration of Conformity  

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives  

2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.  

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/  

2) Go to Advanced > Network > Internet to verify the parameters provided by your ISP are correctly  

entered. If the parameters are incorrect, click Create Profile and enter the correct parameters, then  

select the new profile from the Profile Name list.  

UK Declaration of Conformity  

3) Go to Advanced > MBB > Data Settings to verify if the Total/Monthly Used exceeds the  

Total/Monthly Allowance. If it does, click Correct and set Total/Monthly Used to 0 (zero), or disable  

Data Limit.  

4) Go to Advanced > Network > Internet to verify that Mobile Data is enabled. If it is not, enable it to  

access the internet.  

5) Confirm with your ISP if you are in a roaming service area. If you are, go to Advanced > Network >  

Internet to enable Data Roaming.  

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio  

Equipment Regulations 2017.  

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/  

Safety Information  

•

•

•

Do not use any other chargers than those recommended.  

Do not use the device where wireless devices are not allowed.  

Adapter shall be installed near the equipment and shall be  

easily accessible.  

•

•

Keep the device away from water, fire, humidity or hot environments.  

Do not attempt to disassemble, repair, or modify the device. If you need  

service, please contact us.  

•

Do not use damaged charger or USB cable to charge the device.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.5 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide, please ask here and describe the problem in detail.