TP-Link Archer MR600 Wireless 4G LTE Router Installation Guide

1

2

Customize the 4G LTE Router  

Configure the router via Tether App  

1. Make sure your computer is connected to the router (wired or wireless).  

The TP-Link Tether app provides a simple, intuitive way to access and manage your router.  

2. Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1.  

Block unwelcome users from  

connecting to your network  

Change the basic wireless  

network settings  

View information about clients  

connected to your router  

Set up Parental Controls  

with access time  

Create a new password for future logins.  

Note: If the login page does not appear, please refer to Q1 of Need Help? in this guide.  

How to begin?  

http://tplinkmodem.net  

1. Download the TP-Link Tether app.  

New Password  

Low  

Middle  

High  

Confirm Password  

or  

Let’s Get Started  

3. Follow the step-by-step instructions of the Quick Setup to complete the initial  

2. Open the Tether app and log in with your TP-Link ID.  

configuration.  

Note: If you don’t have an account, create one first.  

Note: The router can also be used (or configured) in Wireless Router Mode for ADSL/Cable  

connections. For more advanced configurations, please refer to the user guide on TP-Link  

official website at www.tp-link.com.  

3. Tap the button in the Tether app and select Router > 3G/4G Router.  

Follow the steps to complete the setup and connect to the internet.  

Need Help?  

4) Go to Advanced > Network > Internet to verify that Mobile Data is enabled. If it is not, enable it to  

access the internet.  

5) Confirm with your ISP if you are in a roaming service area. If you are, go to Advanced > Network >  

Internet to enable Data Roaming.  

Q1. What should I do if I cannot access the web management page?  

•

•

•

•

•

If the computer is set to a static IP address, change its settings to obtain an IP address automatically.  

Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser.  

Use another web browser and try again.  

Reboot your router and try again.  

Disable and enable the active network adapter in use.  

Q3. How do I restore the router to its factory default settings?  

•

With the router powered on, press and hold the RESET button on the rear panel of the router until the  

Power LED starts flashing, then release the button. Wait while the router resets.  

Q2. What should I do if I cannot access the internet?  

•

Log in to the web management page of the router, and go to Advanced > System Tools > Backup &  

Restore, click Factory Restore and wait until the reset process is complete.  

•

•

•

•

Verify that your SIM card is an LTE or WCDMA card.  

Verify that your SIM card is in your internet service provider’s service area.  

Verify that your SIM card has sufficient credit.  

Check the LAN connection: Open a web browser and enter http://tplinkmodem.net or  

http://192.168.1.1 in the address bar. If the login page does not appear, refer to Q1 and then try  

again.  

Q4. What should I do if I forget my web management page password?  

Refer to Q3 to reset the router, then create a new password to log in.  

•

Q5. What should I do if I forget my wireless network password?  

•

Launch a web browser, log in to the web management page, and check the following:  

1) Go to Advanced > Network > Internet to verify the parameters provided by your ISP are correctly  

entered. If the parameters are incorrect, click Create Profile and enter the correct parameters, then  

select the new profile from the Profile Name list.  

•

•

The default wireless password is printed on the product label of the router.  

Connect a computer directly to the router using an Ethernet cable. Log in to the router's web  

management page and go to Basic > Wireless to retrieve or reset your wireless password.  

2) Go to Advanced > Network > PIN Management to verify if PIN is required. If it is, enter the correct  

For technical support, the user guide and other information, visit https://www.tp-link.com/support.  

PIN provided by your ISP, and click Save.  

Safety Information  

3) Go to Advanced > Network > Data Settings to verify if the Total/Monthly Used exceeds the  

Total/Monthly Allowance. If it does, click Correct and set Total/Monthly Used to 0 (zero), or disable  

Data Limit.  

Keep the device away from water, fire, humidity or hot environments.  

Do not attempt to disassemble, repair, or modify the device.  

Do not use damaged charger or USB cable to charge the device.  

Do not use any other chargers than those recommended.  

Do not use the device where wireless devices are not allowed.  

Adapter shall be installed near the equipment and shall be easily accessible.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer MR600 Wireless 4G LTE Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.18 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer MR600 Wireless 4G LTE Router Installation Guide, please ask here and describe the problem in detail.