TP-Link AX5400 Multi Gigabit Wifi 6 Router User Guide
2
1
Set Up the Network
Connect the Hardware
ꢀ Unplug the power to turn off your modem, if any, and remove
Method ONE: Via TP-Link Tether App
Method TWO: Via a Web Browser
Unplug the power
the backup battery if it has one.
1. Download the Tether app.
1. Connect your device to the router wirelessly
or with an Ethernet cable.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
ꢀ Refer to Q5 of Need Help to place the router for optimal
Wi-Fi performance.
Modem
or
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s 2.5 Gbps WAN/LAN port to it, then follow steps 3 and 4 to complete the hardware connection.
*Image may differ from actual product.
Scan for Tether
Tether
2. Open the Tether app and log in with your
TP-Link ID.
1
Connect the powered-off
modem to the router’s 2.5
Gbps WAN/LAN port with
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Note: If you don’t have an account, create one first.
3. Tap the button in the Tether app and
select Wireless Router > Standard
Routers. Follow the steps to complete
the setup and connect to the internet.
an Ethernet cable.
Note: If you want to use the 1 Gbps WAN/LAN
port as the WAN port instead, please refer to
Q1 of Need Help? in this guide.
2. Launch a web browser, and enter
the address bar. Create a password to log in.
Internet
Note: If the login window does not appear, please refer to Q1 of
Need Help in this guide.
Choose Your Device Type
Wireless Router
New Password:
Confirm Password:
2
4
Power on the modem, and then wait
3
Connect the power adapter to
the router and turn it on.
about 2 minutes for it to restart.
Gaming Router
Range Extender
Let’s Get Started
Verify that the hardware connection is correct by checking the following LEDs.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Power
On
2.4 GHz
On
5 GHz
On
Internet
On
Note: If the 2.4 GHz LED and 5 GHz LED are off, press and hold the Wi-Fi button on the back for more than 2 seconds.
Both the LEDs should turn solid on.
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
| General | Details |
|---|---|
| Name | TP-Link AX5400 Multi Gigabit Wifi 6 Router User Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.55 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding TP-Link AX5400 Multi Gigabit Wifi 6 Router User Guide, please ask here and describe the problem in detail.
TP-Link VR300 Archer Modem Router User Guide
TP-Link T150500-2-DT WiFi Router Instruction Manual
TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide
TP-Link Omada ER8411 VPN Router Instructions
TP-Link Configure VDSL Router User Guide
TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual
TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide
TP-Link VR600 Wireless DSL Modem Router Installation Guide
TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide
TP-Link AC750 Wireless Dual Band Router Owner’s Manual
CISCO cBR Series Converged Broadband Router User Guide
MERCUSYS MR62X Wireless Router Installation Guide
Cudy LT400 Outdoor 4G Wi-Fi Outdoor Router Installation Guide
ZYXEL LTE3301-PLUS 4G LTE-A Router User Guide
TP-Link AC1900 Wi-Fi Router Installation Guide
GRANDSTREAM GWN700x VPN Router User Guide
ASUS RT-AXE7800 Wireless AXE7800 Tri Band Gigabit Router User Guide
RYOBI RTR18 Trim Router Instruction Manual
TP-Link XGB430v Pro BE7200 Dual-Band Wi-Fi 7 XGS-PON Router Owner’s Manual
FIRSTNUM CPE C1 WiFi Router User Manual