TP-Link ER8411 Omada VPN Router with 10G Ports Installation Guide

1

2

LED  

Indication  

On: The router is powered by PWR1.  

Off: PWR1 is disconnected or it works improperly, or the router is powered off.  

PWR1*  

Green On: The router is powered by PWR2.  

Yellow On** : PWR2 are connected, but the router is powered by PWR1.*  

Off: PWR2 is disconnected or it works improperly, or the router is powered off.  

PWR2  

Flashing: The router works properly.  

On or Off: The router works improperly.  

Quick Flashing: The router is being reset.  

SYS  

FAN  

Green On: The fan works properly.  

Yellow On: The fan works improperly.  

Installation Guide  

For USB Modem:  

Green Flashing: A modem is connected and it is initializing.  

Green On: The modem is loaded.  

Off: No modem is inserted, or it is corrupted or incompatible.  

For USB Storage:  

Omada VPN Router with 10G Ports  

USB  

Green On: A USB storage device is inserted and identified.  

Off: No USB storage device is inserted, or it is corrupted or incompatible.  

Green On: Running at 10 Gbps, but no activity.  

Green Flashing: Running at 10 Gbps and transmitting or receiving data.  

SFP+ (Port 1-2) Yellow On: Running at 1000 Mbps, but no activity.  

Yellow Flashing: Running at 1000 Mbps and transmitting or receiving data.  

Off: No device is linked to the corresponding port.  

On: Running at 1000 Mbps, but no activity.  

Flashing: Running at 1000 Mbps and transmitting or receiving data.  

Off: No device is linked to the corresponding port.  

SFP (Port 3)  

Green On: Running at 1000 Mbps, but no activity.  

Green Flashing: Running at 1000 Mbps and transmitting or receiving data.  

RJ45 (Port 4-11) Yellow On: Running at 100/10 Mbps, but no activity.  

Yellow Flashing: Running at 100/10 Mbps and transmitting or receiving data.  

Off: No device is linked to the corresponding port.  

*PWR1 is the primary power supply and it takes priority over PWR2.  

**When both PWR1 and PWR2 work properly and the router is powered by PWR1, it takes 10-20  

seconds for the LED PWR2 (yellow) to go out.  

Connection  

ER8411  

Modem  

AC Power Cord  

Internet  

Configuration  

The router supports two configuration options:  

Standalone Mode: Configure and manage the router singly.  

Controller Mode: Configure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as  

access points, switches, and gateways.  

Note: When the router is managed by a controller, configurations of the router will be overridden by the controller.  

Option 1: Standalone Mode  

In Standalone Mode, use a computer to configure and manage the router.  

2. Open a web browser and type the default management address  

192.168.0.1 in the address field of the browser, then press the Enter key.  

3. Create a username and a password for subsequent login attempts and  

for security.  

4. Use the username and password set above to log in to the webpage.  

5. After a successful login, you can configure the function by clicking the  

setup menu on the left side of the screen.  

Router  

PC  

1. Connect a computer to a LAN port of the router with an RJ45 cable  

properly. If your computer is configured with a fixed IP, change it to Obtain  

an IP address automatically.  

For detailed configurations, refer to the User Guide of the router. The guide  

can be found on the download center of our official website:  

https://www.tp-link.com/support/download/.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link ER8411 Omada VPN Router with 10G Ports Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.24 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link ER8411 Omada VPN Router with 10G Ports Installation Guide, please ask here and describe the problem in detail.