TP-Link TL-R470T Load Balance Broadband Router Installation Guide

1

2

4. Use the username and password set above to log in to the webpage.  

5. After a successful login, the main page will appear as shown below, and you  

can configure the function by clicking the setup menu on the left side of the  

screen.  

Appendix: Troubleshooting  

How do I restore the router to its factory default settings?  

Why is the web management page not displaying properly?  

With the router powered on, use a pin to press and hold the RESET button  

(for about 5 seconds) until the System LED lights up and flashes quickly.  

Then release the button and wait while the router reboots, restoring it to its  

factory default settings.  

Please try the following:  

1) Update your web browser or try a different web browser.  

2) If pop-ups are being blocked, please lower the security level of your web  

browser.  

Log in to the web management page of the router. Go to System Tools >  

Management > Factory Default Restore, and click Factory Restore. The  

router will restore and reboot automatically.  

What should I do if I can't access the web management page?  

Why is the Power LED working abnormally?  

1) Check every port LED on the router and make sure the cable is installed  

properly.  

The Power LED should be lit when the power system is working normally.  

If it is not, please check the following:  

2) Try another port on the router and make sure the cable meets the require-  

ment and works normally.  

3) Turn off the power. After a while, turn on the power again.  

1) Make sure that the power cable is connected properly, and the power  

contact is normal.  

4) Make sure the IP address of your PC is set within the subnet of the router.  

2) Make sure the voltage of the power supply meets the requirements for  

the input voltage of the router.  

5) If you still cannot access the configuration page, please restore the router  

to its factory defaults. Then the computer's IP address should be set as  

192.168.0.x (“x” is any number from 2 to 254) and Subnet Mask as  

255.255.255.0.  

What should I do if I forget the user name and password for the  

router's web management page?  

You can restore the router to factory defaults. The default management  

address of the router is http://192.168.0.1. You can manually set a new  

username and password for login. All current settings will be cleared once the  

router is restored. If you have a backup of your configurations, you can import  

it after the factory restore is completed.  

For technical support, the user guide, and other information,  

please visit  

http://www.tp-link.com/support, or simply scan the QR code.  

EU Declaration of Conformity  

Safety Information  

TP-Link hereby declares that the device is in compliance with the essential requirements and other  

relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and  

(EU)2015/863.  

Keep the device away from water, fire, humidity or hot environments.  

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact  

us.  

Do not use damaged charger or USB cable to charge the device.  

Do not use any other chargers than those recommended.  

Adapter shall be installed near the equipment and shall be easily accessible.  

Place the device with its bottom surface downward.  

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/.  

UK Declaration of Conformity  

TP-Link hereby declares that the device is in compliance with the essential requirements and other  

relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment  

(Safety) Regulations 2016.  

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link TL-R470T Load Balance Broadband Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.16 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link TL-R470T Load Balance Broadband Router Installation Guide, please ask here and describe the problem in detail.