Wi-Tek WI-R3 1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough Installation Guide

1

1. Package contents  

3. Network Application  

4. Login Method  

5. Configuration Steps  

6. Cloud Management Settings  

Warranty Card  

2. Interface and LED Indicator  

4)Click the COMPLETE button to complete the setting.  

2)Fill in the group name and location, and click save.  

PoE Power  

Power and data transfer functions are performed over a single cable, eliminating the need to  

deploy power outlets for devices such as cameras.  

1)On the start page of the setup wizard, click Next.  

Step 1 Launch your web browser then enter http://cloud2.wireless-tek.com in the address bar.  

Step 2 Register an account password by user name or email.  

Step 3 log in to the cloud account with the account password after registration.  

SYS  

PWR  

2.4G  

5G  

2.4G LINK 5G LINK  

LAN1  

LAN2  

LAN3  

WAN  

MESH  

Internet  

Internet  

Username  

DC12V-54V  

Address  

OR  

24V OR 48V  

PoE Injector  

Telephone No.  

Purchase Shop  

WISP  

SYS  

PWR  

2.4G  

5G  

2

.

4

G

L

I

N

K

5

G

L

I

N

K

LAN1  

LAN2  

LAN3  

WAN  

MESH  

Purchase Address  

Product Model No.  

Purchase Time  

Serial No.  

2)When the device is connected to the Internet, you can set three options: PPPoE, DHCP  

Client, and Static IP, and then click Next.  

5) In the relevant device options, you can see the bound device information.  

5)The following page will appear after the configuration is complete. Make sure your device  

is connected to the internet.  

Please connect devices according to the above topology.  

Wireless CPE  

Follow the steps for quick Router configuration, using the initial setup wizard:  

Step 1 Connect your PC to the device via Ethernet or Wireless.  

Note: Default WiFi name: Wi-Tek-XXXX, Password: 88888888  

Dealer Signature  

POE  

3)And click next.  

OFF  

ON  

RESET  

DCIN 12-54V  

WAN  

PoE OUT  

LAN3  

PoE OUT  

LAN2  

PoE OUT  

LAN1  

PoE IN  

WAN+PoE Out  

If the product defects within three months after purchase, we will provide you a new  

product of the same model.  

Step 2 To log in to the router, launch a web browser and enter http://192.168.10.1 in the address.  

^{The login page will appear}S^{. By}e^dt^efu^aup^{lt, b}n^ote^{h t}w^{he u}M^serna^ams^et^ae^ndr^pA^assP^{word are admin.}  

LAN+POE Out  

LAN+POE Out  

If the product defects within the three-year warranty period, we will provide the  

professional maintenance service.  

Proof of purchase and a complete product serial number are required to receive any  

services guaranteed as part of the limited warranty.  

After the login is successful, the steps to bind the device to the cloud  

account are as follows:  

Any other defects that are not caused by workmanship or product quality, such as  

natural disaster, water damage, extreme thermal or environmental conditions. sticker  

damaged, warranty card losing will disqualify the product from limited warranty.  

1)Click ADD NETWORK  

POE  

OFF  

ON  

RESET  

DCIN 12-54V  

WAN  

LAN3  

LAN2  

LAN1  

PoE IN  

PoE OUT PoE OUT PoE OUT  

Wireless mesh networking  

Provide whole-home Wi-Fi coverage and eliminate weak signals once for all.  

3)For the WiFi page, you can select the country code and configure SSID, encryption, key.  

Also, choose whether to enable guest WiFi. Click NEXT.  

DC IN 12V-54V  

RESET  

PoE OUT Slide Switch  

WAN/LAN3/LAN2 PoE OUT  

6)Click Tunnel, Select binding device type, click EWEB to log in to the device.  

LAN1 with PoE IN  

LED  

Description  

On: the device is powered up.  

Off: the device is powered off.  

PWR  

4)Enter the serial number, click ADD to create and click FINISH, the configuration is complete.  

On: the device is running normally.  

Off: the device is running abnormal.  

SYS  

Quick Install Guide  

On:2.4G Wi-Fi is normally.  

Off:2.4G Wi-Fi is abnormal.  

2.4G  

Quick Install Guide  

On:5G Wi-Fi is normally.  

Off:5G Wi-Fi is abnormal.  

WI-R3  

WI-R3  

1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough  

Company Website  

5G  

1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough  

Technical Support  

Cloud Management  

www.wireless-tek.com  

On:2.4G has link connection.  

Off:2.4G has no link connection.  

Wireless-Tek Technology Limited  

2.4G LINK  

5G LINK  

LAN1/LAN2/LAN3  

WAN  

Address: Biaofang Technology Building 402, Bao'an street,  

Baoan District,Shenzhen City, Guangdong, China  

Website:www.wireless-tek.com  

On:5G has link connection.  

Off:5G has no link connection.  

Flicker: LAN1/LAN2/LAN3 interfaces have forwarding data access.  

Off: LAN1/LAN2/LAN3 interfaces do not forward data access.  

Tel:86-0755-32811290  

www.wireless-tek.com  

Email:sales@wireless-tek.com  

Flicker: WAN interfaces have forwarding data access.  

Off: WAN interfaces do not forward data access.  

RoHS  

Technical Support:tech@wireless-tek.com  

On: Mesh networking is successful.  

Off: There is no device in Mesh networking.  

Note: The 17-digit SN code of the Add device is shown on the sticker on the back of the device.  

MESH  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Wi-Tek WI-R3 1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough Installation Guide
Make	Wi-Tek
Language	English
Filetype	PDF (Download)
File size	0.82 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Wi-Tek

Questions and Answers (0)

If you have any questions regarding Wi-Tek WI-R3 1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough Installation Guide, please ask here and describe the problem in detail.