ADTRAN 1200824G1 Netvanta 3458 Access Router User Guide
The configuration parameters used in the examples outlined in this
document are for instructional purposes only. Please replace all
underlined entries (example) with your specific parameters to configure
your application.
CONFIGURE THE UNIT’S IP ADDRESS
The following steps create an IP address and subnet mask for ETH 0/1. If you are not sure what
IP address to assign, please contact your network administrator.
1. At the # prompt, enter config terminal.
2. At the (config)# prompt, enter interface eth 0/1 to access the configuration parameters for
the Ethernet port located on the rear of the unit.
3. Enter ip address 10.26.12.12 255.255.255.0 to assign an IP address to the Ethernet port
using a 24-bit subnet mask.
4. Enter ip route 0.0.0.0 0.0.0.0 192.22.72.2 to add a default route to the route table. If
necessary, contact your network administrator to obtain the IP address (and subnet mask)
for your particular configuration.
5. Enter no shutdown to activate the interface to pass data.
6. Enter exit to exit the Ethernet interface commands and return to the Global Configuration
mode.
Depending on your configuration, you may need to set a default gateway
as well using the (config)#ip default gateway command. If IP routing is
enabled on the unit, do NOT set a default gateway.
ENABLE TELNET ACCESS
The following steps create a password of adtran for Telnet access. By default, Telnet access is
enabled with a password of password.
1. Verify that the prompt of your unit displays (config)#.
2. Enter line telnet 0 4 to change the configuration parameters for the Telnet sessions.
3. Enter login to initiate Telnet access.
4. Enter password adtran to change the login password for the Telnet sessions.
5. Enter exit to return to the Global Configuration mode.
6. Verify that the prompt of your unit displays (config)#.
7. Enter do write memory to save the current configuration.
2
Copyright © 2009 ADTRAN, Inc. All Rights Reserved.
| General | Details |
|---|---|
| Name | ADTRAN 1200824G1 Netvanta 3458 Access Router User Guide |
| Make | ADTRAN |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.17 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADTRAN 1200824G1 Netvanta 3458 Access Router User Guide, please ask here and describe the problem in detail.
Adtran SDG-8610 Service Delivery Gateway WiFi 6 Gigabit Router Instruction Manual
Adtran 834-5 SDG PlumeOS Dual-Band Wi-Fi 5 Plume Enabled Ethernet Router User Manual
Adtran 854-(v)6 Service Delivery Gateway WiFi 6 2.5G Router User Guide
ADTRAN 17600021F1 834-5 Service Delivery Gateway Wi-Fi 5 Gigabit Router User Guide
CP PLUS DN211-S Dual-Band 4G Router Installation Guide
FESTOOL OF 1010 REBQ Electric Handheld Router Instructions
ZYXEL NBG7510 Dual Band WiFi 6 AX1800 Router User Guide
MOXA TN-5916 ToughNet NAT Router Installation Guide
ASUS WL500W Wireless Router Instructions
snap one Araknis 220 Router User Guide
MERCUSYS MR90X Dual Band 8 Stream Wi-Fi 6 Router User Guide
ufiSpace S9600-72XC Router Installation Guide
ASUS RT-AX86U Pro Wireless-AX5700 Dual-Band Gigabit Router User Guide
mikroTIK hAP ax lite Wireless Router User Manual